Apollo-11/Luminary099/P20-P25.agc

5183 lines
118 KiB
Plaintext
Raw Normal View History

# Copyright: Public domain.
# Filename: P20-P25.agc
# Purpose: Part of the source code for Luminary 1A build 099.
# It is part of the source code for the Lunar Module's (LM)
# Apollo Guidance Computer (AGC), for Apollo 11.
# Assembler: yaYUL
# Contact: Onno Hommes <ohommes@cmu.edu>.
# Website: www.ibiblio.org/apollo.
# Pages: 0492-0613
# Mod history: 2009-05-26 OH Transcribed from page images.
# 2009-06-05 RSB Corrected a typos.
# 2009-06-06 RSB Added a missing instruction, and a block
# of 3 missing instructions.
# 2009-06-07 RSB Fixed a misprint.
2016-12-28 16:11:25 +00:00
# 2009-06-07 RSB Changed the construct "2DEC E-6 B12"
# (which isn't legal in yaYUL) to
# "2DEC 1.0 E-6 B12".
# 2011-05-07 JL Removed workarounds.
# This source code has been transcribed or otherwise adapted from
# digitized images of a hardcopy from the MIT Museum. The digitization
# was performed by Paul Fjeld, and arranged for by Deborah Douglas of
# the Museum. Many thanks to both. The images (with suitable reduction
# in storage size and consequent reduction in image quality as well) are
# available online at www.ibiblio.org/apollo. If for some reason you
# find that the images are illegible, contact me at info@sandroid.org
# about getting access to the (much) higher-quality images which Paul
# actually created.
#
# Notations on the hardcopy document read, in part:
#
# Assemble revision 001 of AGC program LMY99 by NASA 2021112-61
2016-12-28 16:11:25 +00:00
# 16:27 JULY 14, 1969
# Page 492
# RENDEZVOUS NAVIGATION PROGRAM 20
#
# PROGRAM DESCRIPTION
#
# MOD NO -- 2
# BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
# THE PURPOSE OF THIS PROGRAM IS TO CONTROL THE RENDEZVOUS RADAR FROM
2016-12-28 16:11:25 +00:00
# STARTUP THROUGH ACQUISITION AND LOCKON TO THE CSM AND TO UPDATE EITHER
# THE LM OR CSM STATE VECTOR (AS SPECIFIED BY THE ASTRONAUT BY DSKY ENTRY)
# ON THE BASIS OF THE RR TRACKING DATA.
#
# CALLING SEQUENCE --
#
# ASTRONAUT REQUEST THROUGH DSKY V37E20E
#
# SUBROUTINES CALLED
#
# R02BOTH (IMU STATUS CHECK) FLAGUP
# GOFLASH (PINBALL-DISPLAY) FLAGDOWN
# R23LEM (MANUAL ACQUISITION) BANKCALL
# LS201 (LOS DETERMINATION) TASKOVER
# LS202 (RANGE LIMIT TEST)
# R61LEM (PREFERRED TRACKING ATTITUDE)
# R21LEM (RR DESIGNATE) ENDOFJOB
# R22LEM (DATA READ) GOPERF1
2016-12-28 16:11:25 +00:00
# R31LEM (RENDEZVOUS PARAMETER DISPLAY)
# PRIOLARM (PRIORITY DISPLAY)
#
# NORMAL EXIT MODES --
#
# P20 MAY BE TERMINATED IN TWO WAYS -- ASTRONAUT SELECTION OF IDLING
# PROGRAM (P00) BY KEYING V37E00E OR BY KEYING IN V56E
#
# ALARM OR ABORT EXIT MODES --
#
# RANGE GREATER THAN 400 NM DISPLAY
#
# OUTPUT
#
# TRKMKCNT = NO OF RENDEZVOUS TRACKING MARKS TAKEN (COUNTER)
#
# ERASABLE INITIALIZATION REQUIRED
#
# FLAGS SET + RESET
#
# SRCHOPT, RNDVZFLG, ACMODFLG, VEHUPFLG, UPDATFLG, TRACKFLG
#
# DEBRIS
#
# CENTRALS -- A,Q,L
SBANK= LOWSUPER # FOR LOW 2CADR'S.
2016-12-28 16:11:25 +00:00
BANK 33
SETLOC P20S
BANK
2016-12-28 16:11:25 +00:00
EBANK= LOSCOUNT
COUNT* $$/P20
PROG22 = PROG20
PROG20 TC 2PHSCHNG
OCT 4
OCT 05022
OCT 26000 # PRIORITY 26
TC LUNSFCHK # CHECK IF ON LUNAR SURFACE
# Page 493
TC ORBCHGO # YES
TC PROG20A -2 # NO -- CONTINUE WITH P20
ORBCHGO TC UPFLAG # SET VEHUPFLG -- CSM STATE
ADRES VEHUPFLG # VECTOR TO BE UPDATED
CAF ONE # SET R2 FOR OPTION CSM WILL NOT
TS OPTION2 # CHANGE PRESENT ORBIT
CAF OCT00012
TC BANKCALL # DISPLAY ASSUMED CSM ORBIT OPTION
CADR GOPERF4
TC GOTOP00H # TERMINATE
TC ORBCHG1 # PROCEED VALUE OF ASSUMED OPTION OK
TC -5 # R2 LOADED THRU DSKY
ORBCHG1 CS P22ONE
AD OPTION2
EXTEND
BZF PROG20A
CAF V06N33*
TC BANKCALL # FLASH VERB-NOUN TO REQUEST ESTIMATED
CADR GOFLASH # TIME OF LAUNCH
TC GOTOP00H # TERMINATE
TC ORBCHG2 # PROCEED VALUES OK
TC -5 # TIME LOADED THRU DSKY
ORBCHG2 TC INTPRET
GOTO
ORBCHG3
BANK 32
SETLOC P20S4
BANK
COUNT* $$/P20
2016-12-28 16:11:25 +00:00
ORBCHG3 CALL
INTSTALL
2016-12-28 16:11:25 +00:00
DLOAD
TIG
STORE LNCHTM
STORE TDEC1 # ESTIMATED LAUNCH TIME
CLEAR CLEAR
VINTFLAG # LM INTEGRATION
INTYPFLG # PRECISION -- ENCKE
CLEAR CLEAR
DIM0FLAG # NO W-MATRIX
D6OR9FLG
CALL
INTEGRV # PLANETARY INERTIAL ORIENTATION
CALL
GRP2PC
VLOAD
RATT1
STODL RSUBL # SAVE LM POSITION
TAT
# Page 494
STCALL TDEC1
INTSTALL
SET CLEAR
VINTFLAG # CSM INTEGRATION
INTYPFLG
CLEAR BOFF
DIM0FLAG
RENDWFLG # W MATRIX VALID
NOWMATX # NO
SET SET # YES -- SET FOR W MATRIX
DIM0FLAG
D6OR9FLG
NOWMATX CALL
INTEGRV # CSM INTEGRATION
CALL
GRP2PC
VLOAD
VATT1
STOVL VSUBC # SAVE CSM POSITION
RATT1
STORE RSUBC # SAVE CSM POSITION
VXV UNIT # COMPUTE NORMAL TO CSM ORBITAL PLANE
VSUBC # NSUB1=UNIT(R(CM) CROSS V(CM))
STOVL 20D # SAVE NSUB1
RSUBL # COMPUTE ESTIMATED ORBITAL
VXV UNIT # PLANE CHANGE
20D # UCSM = UNIT(R(LM) CROSS NSUB1)
STOVL UCSM
RSUBC # COMPUTE ANGLE BETWEEN UCSM
UNIT DOT # AND RSUBC
UCSM # COS A = UCSM DOT UNIT (R(CM))
SL1
STORE CSTH # SAVE DOE TIME-THETA SUBROUTINE
DSQ BDSU # COMPUTE SINE A
ONEB-2
SQRT
STOVL SNTH # SAVE FOR TIME-THETA SUBROUTINE
RSUBC # POSITION OF CSM AT EST. LAUNCH
STOVL RVEC # TIME FOR TIME-THETHA B-27
VSUBC # VELOCITY OF CSM AT EST. LAUNCH.
VCOMP
STORE VVEC # TIME FOR TIME THETA B-5
CLEAR CALL
RVSW
TIMETHET
VCOMP
STORE NEWVEL # TERMINAL VELOCITY OF CSM
DLOAD
T
STOVL TRANSTM # TRANSFER TIME
# Page 495
NEWVEL
ABVAL
STOVL 20D
0D
STORE NEWPOS # TERMINAL POSITION OF CSM
VXV UNIT # COMPUTE NORMAL TO SCM ORBITAL PLANE
RSUBL # NSUB2 = UNIT(NEWPOS CROSS R(LM))
VXV UNIT # ROTATE TERMINAL VEL INTO DESIRED
NEWPOS # ORBITAL PLANE
VXSC VSL1 # VSUBC = ABVAL(NEWVEL) $ UNIT (NSUB2
20D
STCALL NCSMVEL # NEW CSM VELOCITY
GRP2PC
CALL
INTSTALL
DLOAD BDSU
TRANSTM # LAUNCH TIME -- TRANSFER TIME
LNCHTM
STOVL TET
NEWPOS
STORE RCV
STOVL RRECT
NCSMVEL
STCALL VRECT
MINIRECT
AXT,2 CALL
2
ATOPCSM
CALL
INTWAKE0
EXIT
TC BANKCALL
CADR PROG20A
2016-12-28 16:11:25 +00:00
BANK 24
SETLOC P20S
BANK
COUNT* $$/P20
2016-12-28 16:11:25 +00:00
TC DOWNFLAG # RESET VEHUPFLG -- LM STATE VECTOR
ADRES VEHUPFLG # TO BE UPDATED
PROG20A TC BANKCALL
CADR R02BOTH
TC UPFLAG
ADRES UPDATFLG # SET UPDATE FLAG
TC UPFLAG
ADRES TRACKFLG # SET TRACK FLAG
TC UPFLAG
ADRES RNDVZFLG # SET RENDEZVOUS FLAG
TC DOWNFLAG
ADRES SRCHOPTN # INSURE SEARCH OPTION OFF
# Page 496
TC DOWNFLAG # ALSO MANUAL ACQUISITION FLAG RESET
ADRES ACMODFLG
TC DOWNFLAG # TURN OFF R04FLAG TO ENSURE GETTING
ADRES R04FLAG # ALARM 521 IF CAN'T READ RADAR
TC DOWNFLAG # ENSURE R25 GIMBAL MONITOR IS ENABLED
ADRES NORRMON # (RESET NORRMON FLAG)
TC DOWNFLAG # RESET LOS BEING COMPUTED FLAG
ADRES LOSCMFLG
TC CLRADMOD
P20LEM1 TC PHASCHNG
OCT 04022
CAF ZERO # ZERO MARK COUNTER
TS MARKCTR
TC INTPRET # LOS DETERMINATION ROUTINE
RTB
LOADTIME
STCALL TDEC1
LPS20.1
CALL
LPS20.2 # TEST RANGE R/UTINE
EXIT
INDEX MPAC
TC +1
TC P20LEMA # NORMAL RETURN WITHIN 400 N M
526ALARM CAF ALRM526 # ERROR EXIT -- RANGE > 400 N. MI.
TC BANKCALL
CADR PRIOLARM
TC GOTOV56 # TERMINATE EXITS P20 VIA V56 CODING
TC -4 # PROC (ILLEGAL)
TC P20LEM1 # ENTER RECYCLE
TC ENDOFJOB
2016-12-28 16:11:25 +00:00
P20LEMA TC PHASCHNG
OCT 04022
TC LUNSFCHK # CHECK LUNAR SURFACE FLAG (P22 FLAG)
TC P20LEMB
TC BANKCALL
CADR R61LEM # PREFERRED TRACKING ATTITUDE ROUTINE
P20LEMB TC PHASCHNG
OCT 05022 # RESTART AT PRIORITY 10 TO ALLOW V37
OCT 10000 # REQUESTED PROGRAM TO RUN FIRST
CAF PRIO26 # RESTORE PRIORITY 26
TC PRIOCHNG
CA FLAGWRD1 # IS THE TRACK FLAG SET
MASK TRACKBIT
EXTEND
BZF P20LEMWT # BRANCH -- NO -- WAIT FOR IT TO BE SET
P20LEMB7 CAF BIT2 # IS RR AUTO MODE DISCRETE PRESENT
EXTEND
# Page 497
RAND CHAN33
EXTEND
BZF P20LEMB3 # YES -- DO AUTOMATIC ACQUISITION (R21)
2016-12-28 16:11:25 +00:00
P20LEMB5 CS OCT24 # RADAR NOT IN AUTO CHECK IF
AD MODREG # MAJOR MODE IS 20
EXTEND
BZF P20LEMB6 # BRANCH -- YES -- OKAY TO DO PLEASE PERFORM
2016-12-28 16:11:25 +00:00
AD NEG2 # ALSO CHECK FOR P22
EXTEND
BZF P20LEMB6 # BRANCH -- YES OK TO DO PLEASE PERFORM
CAF ALRM514 # TRACK FLAG SET -- FLASH PRIORITY ALARM 514 --
TC BANKCALL # RADAR GOES OUT OF AUTO MODE WHILE IN USE
CADR PRIOLARM
TC GOTOV56 # TERMINATE EXITS VIA V56
TC P20LEMB # PROCEED AND ENTER BOTH GO BACK
TC P20LEMB # TO CHECK AUTO MODE AGAIN
TC ENDOFJOB
P20LEMB6 CAF OCT201 # REQUEST RR AUTO MODE SELECTION
TC BANKCALL
CADR GOPERF1
TC GOTOV56 # TERMINATE EXITS P20 VIA V56 CODING
TC P20LEMB # PROCEED CHECKS AUTO MODE DISCRETE AGAIN
TC LUNSFCHK # ENTER INDICATES MANUAL ACQUISITION (R23)
TC P20LEMB2 # YES -- R23 NOT ALLOWED -- TURN ON OPR ERROR
TC R23LEM # NO -- DO MANUAL ACQUISITION
2016-12-28 16:11:25 +00:00
P20LEMB1 TC UPFLAG # RETURN FROM R23 -- LOCKON ACHIEVED
ADRES ACMODFLG # SET MANUAL FLAG AND GO BACK TO CHECK
TC P20LEMB # RR AUTO MODE
2016-12-28 16:11:25 +00:00
P20LEMB2 TC FALTON # TURNS ON OPERATOR ERROR LIGHT ON DSKY
TC P20LEMB # AND GOES BACK TO CHECK AUTO MODE
2016-12-28 16:11:25 +00:00
P20LEMB3 CS RADMODES # ARE RR CDUS BEING ZEROED
MASK RCDU0BIT
EXTEND
BZF P20LEMB4 # BRANCH -- YES -- WAIT
CAF BIT13-14 # IS SEARCH OR MANUAL ACQUISITION FLAG SET
MASK FLAGWRD2
EXTEND
BZF P20LEMC3 # ZERO MEANS AUTOMATIC RR ACQUISITION
TC DOWNFLAG # RESET TO AUTO MODE
ADRES SRCHOPTN
# Page 498
TC DOWNFLAG
ADRES ACMODFLG
TC P20LEMWT # WAIT 2.5 SECONDS THEN GO TO RR DATA READ
2016-12-28 16:11:25 +00:00
P20LEMB4 CAF 250DEC
TC BANKCALL # WAIT 2.5 SECONDS WHILE RR CDUS ARE BEING
CADR DELAYJOB # ZEROED -- THEN GO BACK AND CHECK AGAIN
TC P20LEMB3
2016-12-28 16:11:25 +00:00
P20LEMC3 TC INTPRET
RTB
LOADTIME
STCALL TDEC1
UPPSV
P20LEMC4 EXIT
P20LEMC TC PHASCHNG
OCT 04022
CAE FLAGWRD0 # IS THE RENDEZVOUS FLAG SET
MASK RNDVZBIT
EXTEND
BZF ENDOFJOB # NO -- EXIT P20
CAE FLAGWRD1 # IS TRACK FLAG SET (BIT 5 FLAGWORD 1)
MASK TRACKBIT
EXTEND
BZF P20LEMD # BRANCH -- TRACK FLAG NOT ON -- WAIT 15 SECONDS
P20LEMF TC R21LEM
P20LEMWT CAF 250DEC
TC TWIDDLE # USE INSTEAD OF WAITLIST SINCE SAME BANK
ADRES P20LEMC1 # WAIT 2.5 SECONDS
CAE FLAGWRD1 # IS TRACK FLAG SET
MASK TRACKBIT
EXTEND
BZF ENDOFJOB # NO -- EXIT WITHOUT DOING 2.7 PHASE CHANGE
P20LMWT1 TC PHASCHNG
OCT 40072
TC ENDOFJOB
2016-12-28 16:11:25 +00:00
P20LEMC1 CAE FLAGWRD0 # IS RENDEZVOUS FLAG SET
MASK RNDVZBIT
EXTEND
BZF TASKOVER # NO -- EXIT P20/R22
CAE FLAGWRD1 # IS TRACK FLAG SET
MASK TRACKBIT
EXTEND
BZF P20LEMC2 # NO -- DON'T SCHEDULE R22 JOB
# Page 499
CAF PRIO26 # YES -- SCHEDULE R22 JOB (RR DATA READ)
TC FINDVAC
EBANK= LOSCOUNT
2CADR R22LEM42
2016-12-28 16:11:25 +00:00
TC TASKOVER
2016-12-28 16:11:25 +00:00
P20LEMC2 TC FIXDELAY # TRACK FLAG NOT SET, WAIT 15 SECONDS
DEC 1500 # AND CHECK AGAIN
2016-12-28 16:11:25 +00:00
TC P20LEMC1
2016-12-28 16:11:25 +00:00
P20LEMD CAF 1500DEC
TC TWIDDLE # WAITLIST FOR 15 SECONDS
ADRES P20LEMD1
TC ENDOFJOB
2016-12-28 16:11:25 +00:00
P20LEMD1 CAE FLAGWRD1 # IS TRACK FLAG SET
MASK TRACKBIT
CCS A
TCF P20LEMD2 # YES -- SCHEDULE DESIGNATE JOB
TC FIXDELAY # NO -- WAIT 15 SECONDS
DEC 1500
TC P20LEMD1
2016-12-28 16:11:25 +00:00
P20LEMD2 CAF PRIO26 # SCHEDULE JOB TO DO R21
TC FINDVAC
EBANK= LOSCOUNT
2CADR P20LEMC3 # START AT PERM. MEMORY INTEGRATION
2016-12-28 16:11:25 +00:00
TC TASKOVER
2016-12-28 16:11:25 +00:00
250DEC DEC 250
ALRM526 OCT 00526
OCT201 OCT 00201
ALRM514 OCT 514
MAXTRIES DEC 60
OCT00012 OCT 00012
P22ONE OCT 00001
ONEB-2 2DEC 1.0 B-2
V06N33* VN 0633
UPPSV STQ CALL # UPDATES PERMANENT STATE VECTORS
LS21X # TO PRESENT TIME
INTSTALL
CALL
# Page 500
SETIFLGS
BOF SET # IF W-MATRIX INVALID, DON'T INTEGRATE IT
RENDWFLG
UPPSV1
DIM0FLAG # SET DIM0FLAG TO INTEGRATE W-MATRIX
BON SET
SURFFLAG # IF ON LUNAR SURFACE W IS 6X6
UPPSV5
D6OR9FLG # OTHERWISE 9X9
UPPSV5 BOF
VEHUPFLG
UPPSV3
UPPSV1 SET
VINTFLAG
CALL
INTEGRV
CALL # GROUP 2 PHASE CHANGE
GRP2PC # TO PROTECT INTEGRATION
CALL
INTSTALL
DLOAD CLEAR # GET TETCSM TO STORE IN TDEC FOR LM INT.
TETCSM
VINTFLAG
UPPSV4 CALL # INTEGRATE OTHER VEHICLE
SETIFLGS # WITHOUT W-MATRIX
STCALL TDEC1
INTEGRV
BOFF VLOAD
SURFFLAG
P20LEMC4
RCVLEM
VSR2
STOVL LMPOS
VCVLEM
VSR2
STORE LMVEL
GOTO
LS21X
2016-12-28 16:11:25 +00:00
UPPSV3 CLEAR CALL
VINTFLAG
INTEGRV
CALL
GRP2PC
CALL
INTSTALL
SET DLOAD
VINTFLAG
TETLEM # GET TETLEM TO STORE IN TDEC FOR CSM INT.
# Page 501
GOTO
UPPSV4
EBANK= LOSCOUNT
COUNT* $$/P22
2016-12-28 16:11:25 +00:00
# Page 502
# PROGRAM DESCRIPTION
#
# PREFERRED TRACKING ATTITUDE PROGRAM P25
# MOD NO -- 3
# BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
# THE PURPOSE OF THIS PROGRAM IS TO COMPUTE THE PREFERRED TRACKING
# ATTITUDE OF THE LM TO CONTINUOUSLY POINT THE LM TRTACKING BEACON AT THE
# CSM AND TO PERFORM THE MANEUVER TO THE PREFERRED TRACKING ATTITUDE AND
# CONTINUOUSLY MAINTAIN THIS ATTITUDE WITHIN PRESCRIBED LIMITS.
#
# CALLING SEQUENCE --
#
# ASTRONAUT REQUEST THROUGH DSKY V37E25E
#
# SUBROUTINES CALLED --
#
# BANKCALL FLAGUP
# R02BOTH (IMU STATUS CHECK) ENDOFJOB
# R61LEM (PREF TRK ATT ROUT) WAITLIST
# TASKOVER FINDVAC
#
# NORMAL EXIT MODES --
#
# P25 MAY BE TERMINATED IN TWO WAYS -- ASTRONAUT SELECTION OF IDLING
# PROGRAM (P00) BY KEYING V37E00E OR BY KEYING IN V56E
#
# ALARM OR ABORT EXIT MODES --
#
# NONE
#
# OUTPUT
#
# ERASABLE INITIALIZATION REQUIRED
#
# FLAGS SET + RESET
#
# TRACKFLG, P25FLAG
#
# DEBRIS
#
# NONE
EBANK= LOSCOUNT
COUNT* $$/P25
PROG25 TC 2PHSCHNG
OCT 4 # MAKE GROUP 4 INACTIVE (VERB 37)
OCT 05022
OCT 26000 # PRIORITY 26
2016-12-28 16:11:25 +00:00
TC BANKCALL
CADR R02BOTH # IMU STATUS CHECK
TC UPFLAG
ADRES TRACKFLG # SET TRACK FLAG
TC UPFLAG
ADRES P25FLAG # SET P25FLAG
P25LEM1 TC PHASCHNG
OCT 04022
CAF P25FLBIT
MASK STATE # IS P25FLAG SET
EXTEND
BZF ENDOFJOB
CAF TRACKBIT # IS TRACKFLAG SET?
MASK STATE +1
EXTEND
# Page 503
BZF P25LMWT1 # NO -- SKIP PHASE CHANGE AND WAIT 1 MINUTE
CAF SEVEN # CALL R65 -- FINE PREFERRED
TS R65CNTR
TC BANKCALL # TRACKING ATTITUDE ROUTINE
CADR R65LEM
TC P25LEM1 # THEN GO CHECK FLAGS
P25LEMWT TC PHASCHNG
OCT 00112
P25LMWT1 CAF 60SCNDS
TC TWIDDLE # WAIT ONE MINUTE THEN CHECK AGAIN
ADRES P25LEM2
TC ENDOFJOB
P25LEM2 CAF PRIO14
TC FINDVAC
EBANK= LOSCOUNT
2CADR P25LEM1
2016-12-28 16:11:25 +00:00
TC TASKOVER
60SCNDS DEC 6000
# Page 504
# DATA READ ROUTINE 22 (LEM)
# PROGRAM DESCRIPTION
#
# MOD NO -- 2
# BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
# TO PROCESS AUTOMATIC RR MARK DATA TO UPDATE THE STATE VECTOR OF EITHER
# LM OR CSM AS DEFINED IN THE RENDEZVOUS NAVIGATION PROGRAM (P20)
#
# CALLING SEQUENCE --
#
# TC BANKCALL
# CADR R22LEM
#
# SUBROUTINES CALLED --
#
# LSR22.1 GOFLASH WAITLIST
# LSR22.2 PRIOLARM BANKCALL
# LSR22.3 R61LEM
#
# NORMAL EXIT MODES --
#
# R22 WILL CONTINUE TO RECYCLE, UPDATING STATE VECTORS WITH RADAR DATA
# UNTIL P20 CEASES TO OPERATE (RENDEZVOUS FLAG SET TO ZERO) AT WHICH TIME
# R22 WILL TERMINATE SELF.
#
# ALARM OR ABORT EXIT MODES --
#
# PRIORITY ALARM
# PRIORITY ALARM 525 LOS NOT WITHIN 3 DEGREE LIMIT
#
# OUTPUT
#
# SEE OUTPUT FROM LSR22.3
#
# ERASABLE INITIALIZATION REQUIRED
#
# SEE LSR22.1, LSR22.2, LSR22.3
#
# FLAGS SET + RESET
#
# NOANGFLG
#
# DEBRIS
#
# SEE LSR22.1, LSR22.2, LSR22.3
EBANK= LRS22.1X
COUNT* $$/R22
R22LEM TC PHASCHNG
OCT 04022
CAF RNDVZBIT # IS RENDEZVOUS FLAG SET?
MASK STATE
EXTEND
BZF ENDOFJOB # NO -- EXIT R22 AND P20
CAF TRACKBIT # IS TRACKFLAG SET?
MASK STATE +1
EXTEND
BZF R22WAIT # NO WAIT
R22LEM12 CAF BIT14 # IS RR AUTO TRACK ENABLE DISCRETE STILL
EXTEND # ON (A MONITOR REPOSITION BY R25 CLEARS IT)
RAND CHAN12
EXTEND
BZF P20LEMA # NO -- RETURN TO P20
CAF BIT2 # YES
EXTEND # IS RR AUTO MODE DISCRETE PRESENT
RAND CHAN33
# Page 505
EXTEND
BZF +2 # YES CONTINUE
TC P20LEMB5 # NO -- SET IT
CS RADMODES # ARE RR CDUS BEING ZEROED
MASK RCDU0BIT
EXTEND
BZF R22LEM42 # CDUS BEING ZEROED
TC PHASCHNG # IF A RESTART OCCURS, AND EXTRA RADAR
OCT 00152 # READING IS TAKEN, SO BAD DATA ISN'T USED
TC BANKCALL # YES READ DATA + CALCULATE LOS
CADR LRS22.1 # DATA READ SUBROUTINE
INDEX MPAC
TC +1
TC R22LEM2 # NORMAL RETURN (GOOD DATA)
TC P20LEMC # COULD NOT READ RADAR -- TRY TO REDESIGNATE
CAF ALRM525 # RR LOS NOT WITHIN 3 DEGREES (ALARM)
TC BANKCALL
CADR PRIOLARM
TC GOTOV56 # TERMINATE EXITS P20 VIA V56 CODING
TC R22LEM1 # PROC (DISPLAY DELTA THETA)
TC -5 # ENTER (ILLEGAL OPTION)
TC ENDOFJOB
R22LEM1 TC PHASCHNG
OCT 04022
CAF V06N05 # DISPLAY DELTA THETA
TC BANKCALL
CADR PRIODSP
TC GOTOV56 # TERMINATE EXITS P20 VIA V56 CODING
TC R22LEM2 # PROC (OK CONTINUE)
TC P20LEMC # ENTER (RECYCLE)
R22LEM2 TC PHASCHNG
OCT 04022
TC LUNSFCHK # CHECK IF ON LUNAR SURFACE (P22FLAG SET)
TC R22LEM3 # YES -- BYPASS FLAG CHECKS AND LRS22.2
CA FLAGWRD1 # IS TRACK FLAG SET
MASK TRACKBIT
EXTEND
BZF R22WAIT # NO -- WAIT
TC BANKCALL # YES
CADR LRS22.2 # CHECKS RR BORESIGHT WITHIN 30 DEG OF +Z
INDEX MPAC
TC +1
TC R22LEM3 # NORMAL RETURN (LOS WITHIN 30 OF Z-AXIS)
TC BANKCALL
CADR R61LEM
TC R22WAIT # NOT WITHIN 30 DEG OF Z-AXIS
R22LEM3 CS FLAGWRD1 # SHOULD WE BYPASS STATE VECTOR UPDATE
MASK NOUPFBIT # (IS NO UPDATE FLAG SET?)
# Page 506
EXTEND
BZF R22LEM42 # BRANCH -- YES
CA FLAGWRD1 # IS UPDATE FLAG SET
MASK UPDATBIT
EXTEND
BZF R22LEM42 # UPDATE FLAG NOT SET
CAF PRIO26 # INSURE HIGH PRIO IN RESTART
TS PHSPRDT2
2016-12-28 16:11:25 +00:00
TC INTPRET
GOTO
LSR22.3
R22LEM93 EXIT # NORMAL EXIT FROM LSR22.3
TC PHASCHNG # PHASE CHANGE TO PROTECT AGAINST
OCT 04022 # CONFLICT WITH GRP2PC ERASEABLE
TCF R22LEM44
R22LEM96 EXIT
CAF ZERO # SET N49FLAG = ZERO TO INDICATE
TS N49FLAG # V06 N49 DISPLAY HASN'T BEEN ANSWERED
TC PHASCHNG
OCT 04022 # TO PROTECT DISPLAY
CAF PRIO27 # PROTECT DISPLAY
TC NOVAC
EBANK= N49FLAG
2CADR N49DSP
2016-12-28 16:11:25 +00:00
TC INTPRET
SLOAD
N49FLAG
BZE BMN # LOOP TO CHECK IF FLAG
-3 # SETTING CHANGED -- BRANCH -- NO
R22LEM7 # PROCEED
EXIT # DISPLAY ANSERED BY RECYCLE
TC LUNSFCHK # ARE WE ON LUNAR SURFACE
TC R22WAIT # YES -- 15 SECOND DELAY
CA ZERO # NO -- SET R65COUNTER = 0, DO FINE
TC R22LEM45 # TRACKING TAKE ANOTHER RADAR READING
R22LEM7 CALL # PROCEED
GRP2PC # PHASE CHANGE AND
GOTO # GO TO INCOPORATE DATA.
ASTOK
R22LEM44 INCR MARKCTR # INCREMENT COUNT OF MARKS INCORPORATED.
TC LUNSFCHK # ARE WE ON LUNAR SURFACE
TC R22LEM46 # YES -- WAIT 2 SECONDS
CA FIVE # NOT ON LUNAR SURFACE
TC R22LEM45 # R65COUNTER = 5
R22LEM42 TC LUNSFCHK # CHECK IF ON LUNAR SURFACE (P22FLAG SET)
TC R22LEM46 # YES -- WAIT 2 SECONDS
CA TWO # NO -- SET R65COUNTER = 2
R22LEM45 TS R65CNTR
# Page 507
TC BANKCALL
CADR R65LEM # FINE PREFERRED TRACKING ATTITUDE
TC R22LEM
R22WAIT CAF 1500DEC
TC P20LEMWT +1
2016-12-28 16:11:25 +00:00
R22LEM46 CAF 2SECS
TC BANKCALL # WAIT 2 SECONDS AND TAKE ANOTHER MARK
CADR DELAYJOB
TC R22LEM
2016-12-28 16:11:25 +00:00
N49DSP CAF V06N49NB
TC BANKCALL # EXCESSIVE STATE VECTOR UPDATE -- FLASH
CADR PRIODSP # VERB 06 NOUN 49 R1=DELTA R, R2=DELTA V
TC GOTOV56 # TERMINATE -- EXIT R22 AND P20
CS ONE # PROCEED -- N49FLAG = -1
TS N49FLAG # RECYCLE -- N49FLAG = + VALUE
TC ENDOFJOB
R22RSTRT TC PHASCHNG # IF A RESTART OCCURS WHILE READING RADAR
OCT 00152 # COME HERE TO TAKE A RANGE-RATE READING
TC BANKCALL # WHICH ISN'T USED TO PREVENT TAKING A BAD
CADR RRRDOT # READING AND TRYING TO INCORPORATE THE
TC BANKCALL # BAD DATA
CADR RADSTALL # WAIT FOR READ COMPLETE
TC P20LEMC # COULD NOT READ RADAR -- TRY TO REDISGNATE
TC R22LEM # READ SUCCESSFUL -- CONTINUE AT R22
2016-12-28 16:11:25 +00:00
ALRM525 OCT 00525
V06N05 VN 00605
V06N49NB VN 00649
1500DEC DEC 1500
# LUNSFCHECK -- CLOSED SUBROUTINE TO CHECK IF ON LUNAR SURFACE (P22FLAG)
# RETURNS TO CALLER +1 IF P22FLAG SET
# TO CALLER +2 IF P22FLAG NOT SET
COUNT* $$/P22
LUNSFCHK CS FLAGWRD8 # CHECK IF ON LUNAR SURFACE
MASK SURFFBIT # IS SURFFLAG SET?
CCS A # BRANCH -- P22FLAG SET
INCR Q # NOT SET
TC Q # RETURN
2016-12-28 16:11:25 +00:00
# Page 508
# RR DESIGNATE ROUTINE (R21LEM)
# PROGRAM DESCRIPTION
#
# MOD NO -- 2
# BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
# TO POINT THE RENDEZVOUS RADAR AT THE CSM UNTIL AUTOMATIC ACQUISITION
# OF THE CSM IS ACCOMPLISHED BY THE RADAR. ROUTINE IS CALLED BY P20.
#
# CALLING SEQUENCE --
#
# TC BANKCALL
# CADR R21LEM
#
# SUBROUTINES CALLED --
#
# FINDVAC FLAGUP ENDOFJOB PRIOLARM
# NOVAC INTPRET LPS20.1 PHASCHNG
# WAITLIST JOBSLEEP JOBWAKE FLAGDOWN
# TASKOVER BANKCALL RADSTALL RRDESSM
#
# NORMAL EXIT MODES
2016-12-28 16:11:25 +00:00
#
# WHEN LOCK-ON IS ACHIEVED, BRANCH WILL BE TO P20 WHERE R22 (DATA READ
# WILL BE SELECTED OR A NEED FOR A MANEUVER (BRANCH TO P20LEMA)
#
# ALARM OR ABORT EXIT MODES --
#
# PRIORITY ALARM 503 WHEN LOCK-ON HASN'T BEEN ACHIEVED AFTER 30SECS --
# THIS REQUIRES ASTRONAUT INTERFACE: SELECTION OF SEARCH OPTION OF
# ACQUISITION
#
# OUTPUT
#
# SEE LPS20.1, RRDESSM
#
# ERASABLE INITIALIZATION REQUIRED
#
# RRTARGET, RADMODES ARE USED BY LPS20.1 AND RRDESSM
#
# FLAGS SET + RESET
#
# LOSCMFLG LOKONSW
#
# DEBRIS
#
# SEE LPS20.1, RRSESSM
EBANK= LOSCOUNT
COUNT* $$/R21
R21LEM CS BIT14 # REMOVE RR SELF TRACK ENABLE
EXTEND
WAND CHAN12
TC LUNSFCHK
TC R21LEM5
CAF ZERO # COMMAND ANTENNA TO MODE CENTER
TS TANG # IF NOT ON SURFACE -- MODE 1 -- (T=0,S=0)
TS TANG +1
TC R21LEM6
R21LEM5 CAF BIT12
MASK RADMODES
CCS A
TC R21LEM10
CAF BIT15
TS TANG
CS HALF
TS TANG +1
# Page 509
R21LEM6 TC DOWNFLAG
ADRES LOKONSW
TC BANKCALL
CADR RRDESNB
TC +1
TC BANKCALL
CADR RADSTALL
TC R21-503 # BAD RETURN FROM DESIGNATE -- ISSUE ALARM
R21LEM10 TC UPFLAG
ADRES LOSCMFLG # EVERY FOURTH PASS THRU DODES
CAF MAXTRIES # ALLOW 60 PASSES (APPROX 45 SECONDS)
TS DESCOUNT # TO DESIGNATE AND LOCK ON
R21LEM2 CAF THREE
TS LOSCOUNT
R21LEM1 TC INTPRET
RTB DAD
LOADTIME
HALFSEC # EXTRAPOLATE TO PRESENT TIME + .5 SEC.
STCALL TDEC1 # LOS DETERMINATION ROUTINE
LPS20.1
EXIT
R21LEM3 TC UPFLAG # SET LOKONSW TO RADAR -- ON DESIRED
ADRES LOKONSW
TC DOWNFLAG
ADRES NORRMON
TC INTPRET
CALL # INPUT (RRTARGET UPDATED BY LPS20.1)
RRDESSM # DESIGNATE ROUTINE
EXIT
TC R21LEM4 # LOS NOT IN MODE 2 COVERAGE
# ON LUNAR SURFACE
TC P20LEMA # VEHICLE MANEUVER REQUIRED.
TC BANKCALL # NO VEHICLE MANEUVER REQUIRED
CADR RADSTALL # WAIT FOR DESIGNATE COMPLETE -- LOCKON OR
TC +2 # BAD END -- LOCKON NOT ACHIEVED IN 60 TRIES
TC R21END # EXIT ROUTINE RETURN TO P20 (LOCK-ON)
R21-503 CAF ALRM503 # ISSUE ALARM 503
TC BANKCALL
CADR PRIOLARM
TC GOTOV56 # TERMINATE EXITS P20 VIA V56 CODING
TC R21SRCH # PROC
TC P20LEMC3
TC ENDOFJOB
R21END TC DOWNFLAG
ADRES LOSCMFLG # RESET LOSCMFLG
TC R21DISP # PUT UP VERIFY MAIN LOBE LOCKON DISPLAY
R21SRCH TC PHASCHNG
OCT 04022
TC R24LEM # SEARCH ROUTINE
ALRM503 OCT 00503
# Page 510
ALRM527 OCT 527
R21LEM4 CAF MAXTRIES # SET UP COUNTER FOR
TS REPOSCNT # 60 PASSES (APPROX 600 SECS.)
TC UPFLAG
ADRES FSPASFLG # SET FIRST PASS FLAG
TC DOWNFLAG # RESET LOS BEING
ADRES LOSCMFLG # COMPUTED FLAG
TC INTPRET
R21LEM12 RTB
LOADTIME
DAD
TENSEC # TIME T = T + 10 SECS.
STORE REPOSTM # SAVE FOR LONGCALL AND UPPSV
STCALL TDEC1
LPS20.1 # COMPUTE LOS AT TIME T
CALL
RRDESSM
EXIT
TC R21LEM13 # LOS NOT IN MODE 2 COVERAGE
TC ENDOFJOB # VEHICLE MANEUVER REQUIRED
TC KILLTASK
CADR BEGDES
TC INTPRET
BOF
FSPASFLG # FIRST PASS THRU REPOSITION
R21LEMB # NO -- GO TO CONTINUOUS DESIGNATE
CLRGO
FSPASFLG # YES -- RESET FIRST PASS FLAG
R21LEM7 +1
R21LEM13 CCS REPOSCNT # HAVE WE TRIED 60 TIMES?
TC R21LEM7 # NO -- ADD 10 SECS. RECOMPUTE LOS
TC R21LEM11 # YES -- PUT OUT ALARM 530
R21LEM7 TS REPOSCNT
TC INTPRET
DLOAD GOTO
REPOSTM
R21LEM12 +2
R21LEMB DLOAD
REPOSTM
STCALL TDEC1
UPPSV
EXIT
TC UPFLAG # SET RADMODES BIT 15 FOR
ADRES CDESFLAG # CONTINUOUS DESIGNATION
TC DOWNFLAG
ADRES LOKONSW
TC UPFLAG
ADRES NORRMON
# Page 511
TC BANKCALL
CADR RRDESNB
TC +1
TC INTPRET
RTB BDSU
LOADTIME # COMPUTE DELTA TIME
REPOSTM # FOR LONGCALL
STORE DELTATM
EXIT
EXTEND
DCA DELTATM
TC LONGCALL
EBANK= LOSCOUNT
2CADR R21LEM9
2016-12-28 16:11:25 +00:00
TC ENDOFJOB
R21LEM9 TC KILLTASK
CADR STDESIG
TC CLRADMOD
CAF PRIO26
TC FINDVAC
EBANK= LOSCOUNT
2CADR R21LEM10
2016-12-28 16:11:25 +00:00
TC TASKOVER
R21LEM11 CAF ALRM530 # ALARM 530 -- LOS NOT IN COVERAGE
TC BANKCALL # AFTER TRYING TO DESIGNATE FOR
CADR PRIOLARM # 600 SECS.
TC GOTOV56
TC GOTOV56
TC GOTOV56
TC ENDOFJOB
ALRM530 OCT 00530
TENSEC 2DEC 1000 B-28
HALFSEC 2DEC 50
R21DISP TC PHASCHNG
OCT 04022
CAF V06N72PV # FLASH V 50 N 72 -- PLEASE PERFORM RR
TC BANKCALL # MAIN LOBE LOCKON VERIFICATION
CADR GOPERF2R
TC GOTOV56 # TERMINATE EXITS VIA V 56
TC P20LEMWT # PROCEED CONTINUES TO R22
TC -5 # ENTER ILLEGAL
CAF BIT7
TC LINUS # SET BITS TO MAKE THIS A PRIORITY DISPLAY
TC ENDOFJOB
2016-12-28 16:11:25 +00:00
# Page 512
V06N72PV VN 00672
# Page 513
# MANUAL ACQUISITION ROUTINE R23LEM
# PROGRAM DESCRIPTION
#
# MOD NO -- 2
# BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
# TO ACQUIRE THE CSM BY MANUAL OPERATION OF THE RENDEZVOUS RADAR
#
# CALLING SEQUENCE --
#
# TC R23LEM
#
# SUBROUTINES CALLED
#
# BANKCALL R61LEM
# SETMINDB GOPERF1
#
# NORMAL EXIT MODES --
#
# IN RESPONSE TO THE GOPERF1, SELECTION OF ENTER WILL RECYCLE R23
# SELECTION OF PROC WILL CONTINUE R23
# SELECTION OF TERM WILL TERMINATE R23 + P20
#
# ALARM OR ABORT EXIT MODES --
#
# SEE NORMAL EXIT MODES ABOVE
#
# OUTPUT
#
# N.A.
#
# ERASABLE INITIALIZATION REQUIRED --
#
# ACMODFLG MUST BE SET TO 1 (MANUAL MODE)
EBANK= GENRET
COUNT* $$/R23
R23LEM TC UPFLAG # SET NO ANGLE MONITOR FLAG
ADRES NORRMON
INHINT
TC IBNKCALL # SELECT MINIMUM DEADBAND
CADR SETMINDB
RELINT
R23LEM1 CAF BIT14 # ENABLE TRACKER
EXTEND
WOR CHAN12
CAF OCT205
TC BANKCALL
CADR GOPERF1
TC R23LEM2 # TERMINATE
TC R23LEM11 # PROCEDE
TC R23LEM3 # ENTER -- DO ANOTHER MANEUVER
R23LEM11 INHINT
TC RRLIMCHK # YES -- CHECK IF ANTENNA IS WITHIN LIMITS
ADRES CDUT
TC OUTOFLIM # NOT WITHIN LIMITS
TC IBNKCALL # RESTORE DEADBAND TO
CADR RESTORDB # ASTRONAUT SELECTED VALUE
RELINT
TC DOWNFLAG # CLEAR NO ANGLE MONITOR FLAG
ADRES NORRMON
TC P20LEMB1 # RADAR IS LOCKED ON CONTINUE IN P20
OUTOFLIM RELINT
# Page 514
CAF OCT501PV
TC BANKCALL # ISSUE ALARM -- RR ANTENNA NOT WITHIN
CADR PRIOLARM # LIMITS
TC R23LEM2 # TERMINATE -- EXIT R23 TO R00 (GO TO P00H)
TC OUTOFLIM +1 # PROCEED ILLEGAL
TC R23LEM3 # RECYCLE -- TO ANOTHER MANEUVER
TC ENDOFJOB
R23LEM2 TC DOWNFLAG # CLEAR NO ANGLE MONITOR FLAG
ADRES NORRMON
TC GOTOV56 # AND EXIT VIA V56
R23LEM3 TC BANKCALL
CADR R61LEM
TC R23LEM1
2016-12-28 16:11:25 +00:00
OCT501PV OCT 501
OCT205 OCT 205
# Page 515
# SEARCH ROUTINE R24LEM
# PROGRAM DESCRIPTION
#
# MOD NO -- 2
# BY P. VOLANTE
#
# FUNCTIONAL DESCRIPTION
#
# TO ACQUIRE THE CSM BY A SEARCH PATTERN WHEN THE RENDEZVOUS RADAR HAS
# FAILED TO ACQUIRE TEH CSM IN THE AUTOMATIC TRACKING MODE AND TO ALLOW
# THE ASTRONAUT TO CONFIRM THAT REACQUISITION HAS NOT BEEN IN SIDELOBE.
#
# CALLING SEQUENCE
#
# CAF PRIONN
# TC FINDVAC
# EBANK= DATAGOOD
# 2CADR R24LEM
#
# SUBROUTINES CALLED
#
# FLAGUP FLAGDOWN BANKCALL
# R61LEM GOFLASHR FINDVAC
# ENDOFJOB NOVAC LSR24.1
#
# NORMAL EXIT MODES --
#
# ASTRONAUT RESPONSE TO DISPLAY OF OMEGA AND DATAGOOD. HE CAN EITHER
# REJECT BY TERMINATING (SEARCH OPTION AND RESELECTING P20) OR ACCEPT BY
# PROCEEDING (EXIT ROUTINE AND RETURN TO AUTO MODE IN P20)
#
# ALARM OR ABORT EXIT MODES --
#
# SEE NORMAL EXIT MODES ABOVE
#
# OUTPUT --
#
# SEE OUTPUT FROM LSR24.1 + R61LEM
#
# ERASABLE INITIALIZATION REQUIRED
#
# SET INPUT FOR LSR24.1
#
# FLAGS SET + RESET
#
# SRCHOPT, ACMODFLG
EBANK= DATAGOOD
COUNT* $$/R24
R24LEM TC UPFLAG
ADRES SRCHOPTN # SET SRCHOPT FLAG
TC DOWNFLAG # RESET LOS BEING COMPUTED FLAG TO MAKE
ADRES LOSCMFLG # SURE DODES DOESN'T GO TO R21
R24LEM1 CAF ZERO
TS DATAGOOD # ZERO OUT DATA INDICATOR
TS OMEGAD # ZERO OMEGA DISPLAY REGS
TS OMEGAD +1 # ZERO OMEGA DISPLAY REGS
R24LEM2 TC PHASCHNG
OCT 04022
CAF V16N80
TC BANKCALL
CADR PRIODSPR
TC GOTOV56
TC R24END # PROCEED EXIT R24 TO P20LEM1
2016-12-28 16:11:25 +00:00
TC R24LEM3 # RECYCLE -- CALL R61 TO MANEUVER S/C
# Page 516
TC BANKCALL
CADR LRS24.1
R24END TC KILLTASK
CADR CALLDGCH
TC CLRADMOD # CLEAR BITS 10 & 15 OF RADMODES.
TCF P20LEM1 # AND GO TO 400 MI. RANGE CHECK IN P20
2016-12-28 16:11:25 +00:00
BLOCK 3
SETLOC FFTAG6
BANK
COUNT* $$/R24
2016-12-28 16:11:25 +00:00
CLRADMOD CS BIT10+15
INHINT
MASK RADMODES
TS RADMODES
CS BIT2 # DISABLE RR ERROR COUNTERS
EXTEND
WAND CHAN12 # USER WILL RELINT
2016-12-28 16:11:25 +00:00
TC Q
2016-12-28 16:11:25 +00:00
BIT10+15 OCT 41000
BANK 24
SETLOC P20S
BANK
COUNT* $$/R24
2016-12-28 16:11:25 +00:00
R24LEM3 TC PHASCHNG
OCT 04022
TC KILLTASK
CADR CALLDGCH # KILL WAITLIST FOR NEXT POINT IN PATTERN
TC CLRADMOD # CLEAR BITS 10 + 15 OF RADMODES TO KILL
RELINT # HALF SECOND DESIGNATE LOOP
CAF .5SEC
TC BANKCALL # WAIT FOR DESIGNATE LOOP TO DIE
CADR DELAYJOB
TC LUNSFCHK # CHECK IF ON LUNAR SURFACE
TC R24LEM4 # YES -- DON'T DO ATTITUDE MANEUVER
TC BANKCALL # CALL R61 TO DO PREFERRED TRACKING
CADR R61LEM # ATTITUDE MANEUVER
R24LEM4 CAF ZERO # ZERO OUT RADCADR (WHICH WAS SET BY
TS RADCADR # ENDRADAR WHEN DESIGNATE STOPPED) SO THAT
# RRDESSM WILL RETURN TO CALLER
TC R24LEM2 # AND GO BACK TO PUT UP V16 N80 DISPLAY
2016-12-28 16:11:25 +00:00
V16N80 VN 01680
2016-12-28 16:11:25 +00:00
# Page 517
# PREFERRED TRACKING ATTITUDE ROUTINE R61LEM
# PROGRAM DESCRIPTION
#
# MOD NO: 3 DATE: 4-11-67
# MOD BY: P. VOLANTE, SDC
#
# FUNCTIONAL DESCRIPTION --
#
# TO COMPUTE THE PREFERRED TRACKING ATTITUDE OF THE LM TO ENABLE RR
# TRACKING OF THE CSM AND TO PERFORM THE MANEUVER TO THE PREFERRED
# ATTITUDE.
#
# CALLING SEQUENCE --
#
# TC BANKCALL
# CADR R61LEM
#
# SUBROUTINES CALLED
#
# LPS20.1 VECPOINT
# KALCMAN3
#
# NORMAL EXIT MODES --
#
# NORMAL RETURN IS TO CALLER + 1
#
# ALARM OR ABORT EXIT MODES --
#
# TERMINATE P20 + R61 BY BRANCHING TO P20END IF BOTH TRACKFLAG +
# RENDEZVOUS FLAG ARE NOT SET.
#
# OUTPUT --
#
# SEE OUTPUT FOR LPS20.1 + ATTITUDE MANEUVER ROUTINE (R60)
#
# ERASABLE INITIALIZATION REQUIRED
#
# GENRET USED TO SAVE Q FOR RETURN
#
# FLAGS SET + RESET
#
# 3AXISFLG
#
# DEBRIS
#
# SEE SUBROUTINES
SETLOC R61
BANK
EBANK= LOSCOUNT
COUNT* $$/R61
R61LEM TC MAKECADR
TS GENRET
TC UPFLAG # SET R61 FLAG
ADRES R61FLAG
TC R61C+L01
R65LEM TC MAKECADR
TS GENRET
TC DOWNFLAG # RESET R61 FLAG
ADRES R61FLAG
R61C+L01 CAF TRACKBIT # TRACKFLAG
MASK STATE +1
EXTEND
BZF R65WAIT # NOT SET
R61C+L03 TC INTPRET
VLOAD
# Page 518
HIUNITZ
STORE SCAXIS # TRACK AXIS UNIT VECTOR
R61LEM1 RTB DAD
LOADTIME # EXTRAPOLATE FORWARD TO CENTER
3SECONDS # SIX SECOND PERIOD.
STCALL TDEC1
LPS20.1 # LOS DETERMINATION + VEH ATTITUDE
VLOAD
RRTARGET
STORE POINTVSM
RTB CALL # GET DESIRED CDU'S FOR VECPNT1
READCDUD
VECPNT1 # COMPUTES FINAL ANGLES FROM PRESENT CDUDS
STORE CPHI # STORE FINAL ANGLES -- CPHI, CTHETA, CPSI
EXIT
TC PHASCHNG
OCT 04022
CAF TRACKBIT # IS TRACK FLAG SET
MASK FLAGWRD1
EXTEND
BZF R65WAIT
TC BANKCALL
CADR G+N,AUTO # CHECK FOR AUTO MODE
CCS A
TC R61C+L04 # NOT IN AUTO
TC INTPRET
VLOAD CALL
RRTARGET
CDU*SMNB
DLOAD DSU # GET PHI -- ARCCOS OF Z-COMPONENT OF LOS
MPAC +5
COS15DEG
R61LEM2 BMN EXIT # BRANCH -- PHI > 15 DEGREES
R61C+L05 # PHI GRE 10DEG
EBANK= CDUXD
CAF EBANK6
TS EBANK
INHINT
EXTEND
DCA CPHI
DXCH CDUXD
CA CPSI
TS CDUZD
RELINT
EBANK= LOSCOUNT
CAF EBANK7
TS EBANK
TC R61C+L06
R61C+L05 EXIT
INHINT
# Page 519
TC IBNKCALL
FCADR ZATTEROR
TC IBNKCALL
FCADR SETMINDB # REDUCE ATTITUDE ERROR
TC DOWNFLAG
ADRES 3AXISFLG
TC UPFLAG
ADRES PDSPFLAG # SET PRIORITY DISPLAY FLAG
TC BANKCALL
CADR R60LEM
INHINT
TC IBNKCALL
FCADR RESTORDB
TC PHASCHNG
OCT 04022
TC DOWNFLAG
ADRES PDSPFLAG # RESET PRIORITY DISPLAY FLAG
R61C+L06 CA FLAGWRD1
MASK R61FLBIT
CCS A
TC R61C+L4
CCS R65CNTR
TC +2
TC R61C+L4 # R65CNTR = 0 - EXIT ROUTINE
TS R65CNTR
CAF 06SEC
TC TWIDDLE
ADRES R61C+L2
TC ENDOFJOB
R61C+L2 CAF PRIO26
TC FINDVAC
EBANK= LOSCOUNT
2CADR R61C+L01
2016-12-28 16:11:25 +00:00
TC TASKOVER
R61C+L04 TC BANKCALL # TO CONVERT ANGLES TO FDAI
CADR BALLANGS
TC R61C+L06
R61C+L4 CAE GENRET
TCF BANKJUMP # EXIT R61
R61C+L1 CAF BIT7+9PV # IS RENDEZVOUS OR P25FLAG SET
MASK STATE
EXTEND
BZF ENDOFJOB # NO -- EXIT ROUTINE AND PROGRAM.
TC R61C+L06 # YES EXIT ROUTINE
R65WAIT TC POSTJUMP
CADR P20LEMWT
2016-12-28 16:11:25 +00:00
BIT7+9PV OCT 00500
# Page 520
COS15DEG 2DEC 0.96593 B-1
06SEC DEC 600
PHI EQUALS 20D
READCDUD INHINT # READS DESIRED CDU'S AND STORES IN
CAF EBANK6 # MPAC TP EXITS WITH MODE SET TO TP
XCH EBANK
TS RUPTREG1
EBANK= CDUXD
CA CDUXD
TS MPAC
EXTEND
DCA CDUYD
DXCH MPAC +1
CA RUPTREG1
TS EBANK
RELINT
2016-12-28 16:11:25 +00:00
TCF TMODE
BLOCK 02
SETLOC RADARFF
BANK
2016-12-28 16:11:25 +00:00
EBANK= LOSCOUNT
COUNT* $$/RRSUB
# Page 521
# THE FOLLOWING SUBROUTINE RETURNS TO CALLER +2 IF THE ABSOLUTE VALUE OF VALUE OF C(A) IS GREATER THAN THE
# NEGATIVE OF THE NUMBER AT CALLER +1. OTHERWISE IT RETURNS TO CALLER +3. MAY BE CALLED IN RUPT OR UNDER EXEC.
MAGSUB EXTEND
BZMF +2
TCF +2
COM
2016-12-28 16:11:25 +00:00
INDEX Q
AD 0
EXTEND
BZMF Q+2 # ABS(A) <= CONST GO TO L+3
TCF Q+1 # ABS(A) > CONST GO TO L+2
2016-12-28 16:11:25 +00:00
# Page 522
# PROGRAM NAME: RRLIMCHK
#
# FUNCTIONAL DESCRIPTION:
#
# RRLIMCHK CHECKS RR DESIRED GIMBAL ANGLES TO SEE IF THEY ARE WITHIN
# THE LIMITS OF THE CURRENT MODE. INITIALLY THE DESIRED TRUNNION AND
# SHAFT ANGLES ARE STORED IN ITEMP1 AND ITEMP2. THE CURRENT RR
# ANTENNAE MODE (RADMODES BIT 12) IS CHECKED WHICH IS = 0 FOR
# MODE 1 AND =1 FOR MODE 2.
#
# MODE 1 -- THE TRUNNION ANGLE IS CHECKED AT MAGSUB TO SEE IF IT IS
# BETWEEN -55 AND +55 DEGREES. IF NOT, RETURN TO L +2. IF WITHIN LIMITS,
# THE SHAFT ANGLE IS CHECKED TO SEE IF IT IS BETWEEN -70 AND +59 DEGREES.
# IF NOT, RETURN TO L +2. IF IN LIMITS, RETURN TO L +3.
#
# MODE 2 -- THE SHAFT ANGLE IS CHECKED AT MAGSUB TO SEE IF IT IS
# BETWEEN -139 AND -25 DEGREES. IF NOT, RETURN TO L +2. IF WITHIN
# LIMITS, THE TRUNNION ANGLE IS CHECKED TO SEE IF IT IS BETWEEN +125
# AND -125 (+235) DEGREES. IF NOT, RETURN TO L +2. IF IN LIMITS, RETURN
# TO L +3.
#
# CALLING SEQUENCE:
#
# L TC RLIMCHK (WITH INTERRUPT INHIBITED)
# L +1 ADRES T,S (DESIRED TRUNNION ANGLE ADDRESS)
#
# ERASABLE INITIALIZATION REQUIRED:
#
# RADMODES, MODEA, MODEB (OR DESIRED TRUNNION AND SHAFT
# ANGLES ELSEWHERE IN CONSECUTIVE LOCATIONS -- UNSWITCHED ERASABLE OR
# CURRENT EBANK).
#
# SUBROUTINES CALLED: MAGSUB
#
# JOBS OR TASKS INITIATED: NONE
#
# ALARMS: NONE
#
# EXIT: L + 2 (EITHER OR BOTH ANGLES NOT WITHIN LIMITS OF CURRENT MODE)
# L + 3 (BOTH ANGLES WITHIN LIMITS OF CURRENT MODE)
RRLIMCHK EXTEND
INDEX Q
INDEX 0
DCA 0
INCR Q
DXCH ITEMP1
LXCH Q # L(CALLER +2) TO L.
2016-12-28 16:11:25 +00:00
CAF ANTENBIT # SEE WHICH MODE RR IS IN.
MASK RADMODES
CCS A
TCF MODE2CHK
2016-12-28 16:11:25 +00:00
CA ITEMP1 # MODE 1 IS DEFINED AS
# Page 523
TC MAGSUB # 1. ABS(T) L 55 DEGS.
DEC -.30555 # 2. ABS(S + 5.5 DEGS) L 64.5 DEGS
TC L # (SHAFT LIMITS AT +59, -70 DEGS)
2016-12-28 16:11:25 +00:00
CAF 5.5DEGS
AD ITEMP2
TC MAGSUB
DEC -.35833 # 64.5 DEGS
TC L
TC RRLIMOK # IN LIMITS.
2016-12-28 16:11:25 +00:00
MODE2CHK CAF 82DEGS # MODE 2 IS DEFINED AS
AD ITEMP2 # 1. ABS(T) G 125 DEGS.
TC MAGSUB # 2. ABS(S + 82 DEGS) L 57 DEGS
DEC -.31667 # (SHAFT LIMITS AT -25, -139 DEGS)
TC L
2016-12-28 16:11:25 +00:00
CA ITEMP1
TC MAGSUB
DEC -.69444 # 125 DEGS
2016-12-28 16:11:25 +00:00
RRLIMOK INDEX L
TC L # ( = TC 1 )
2016-12-28 16:11:25 +00:00
5.5DEGS DEC .03056
82DEGS DEC .45556
# Page 524
# PROGRAM NAME: SETTRKF
#
# FUNCTIONAL DESCRIPTION:
#
# SETTRKF UPDATES THE TRACKER FAIL LAMP ON THE DSKY.
# INITIALLY THE LAMP TEST FLAG (IMODES33 BIT 1) IS CHECKED.
# IF A LAMP TEST IS IN PROGRESS, THE PROGRAM EXITS TO L +1.
# IF NO LAMP TEST THE FOLLOWING IS CHECKED SEQUENTIALLY:
# 1) RR CDU'S BEING ZEROED, RR CDU OK, AND RR NOT IN
# AUTO MODE (RADMODES BITS 13, 7, 2).
# 2) LR VEL DATA FAIL AND NO LR POS DATA (RADMODES BITS
# 8,5)
# 3) NO RR DATA (RADMODES BIT 4)
# THE ABSENCE OF ALL THREE SIMULTANEOUSLY IN (1), THE PRESENCE OF BOTH
# IN (2), AND THE PRESENCE OF (3) RESULTS IN EITHER THE TRACKER FAIL
# LAMP (DSPTAB +11D BIT 8) BEING TURNED OFF OR IS LEFT OFF. THEREFORE, THE
# TRACKER FAIL LAMP IS TURN ON IF:
# A) RR CDU FAILED WITH RR IN AUTO MODE AND RR CDU'S NOT BEING ZEROED
# B) N SAMPLES OF LR DATA COULD NOT BE TAKEN IN 2N TRIES WITH
# EITHER THE ALT OR VEL INFORMATION
# C) N SAMPLES OF RR DATA COULD NOT BE OBTAINED FROM 2N TRIES
# WITH EITHER THE AL
#
# CALLING SEQUENCE:
#
# L TC SETTRKF
#
# ERASABLE INITIALIZATION REQUIRED: IMODES33, RADMODES, DSPTAB +11D
#
# SUBROUTINES CALLED: NONE
#
# JOBS OR TASKS INITIATED: NONE
#
# ALARMS: TRACKER FAIL LAMP
#
# EXIT: L +1 (ALWAYS)
SETTRKF CAF BIT1 # NO ACTION IF DURING LAMP TEST
MASK IMODES33
CCS A
TC Q
2016-12-28 16:11:25 +00:00
RRTRKF CA BIT8
TS L
CAF 13,7,2 # SEE IF CDU FAILED.
MASK RADMODES
EXTEND
BZF TRKFLON # CONDITION 3 ABOVE.
2016-12-28 16:11:25 +00:00
RRCHECK CAF RRDATABT # SEE IF RR DATA FAILED.
MASK RADMODES
# Page 525
CCS A
TRKFLON CA L
AD DSPTAB +11D # HALF ADD DESIRED AND PRESENT STATES.
MASK L
EXTEND
BZF TCQ # NO CHANGE.
2016-12-28 16:11:25 +00:00
FLIP CA DSPTAB +11D # CAN'T USE LXCH DSPTAB +11D (RESTART PROB)
EXTEND
RXOR LCHAN
MASK POSMAX
AD BIT15
TS DSPTAB +11D
TC Q
2016-12-28 16:11:25 +00:00
13,7,2 OCT 10102
ENDRMODF EQUALS
# Page 526
# PROGRAM NAME: RRTURNON
#
# FUNCTIONAL DESCRIPTION:
#
# RRTURNON IS THE TURN-ON SEQUENCE WHICH, ALONG WTIH
# RRZEROSB, ZEROES THE CDU'S AND DETERMINES THE RR MODE.
# INITIALLY, CONTROL IS TRANSFERRED TO RRZEROSB FOR THE
# ACTUAL TURN-ON SEQUENCE. UPON RETURN THE PROGRAM
# WAITS 1 SECOND BEFORE REMOVING THE TURN-ON FLAG
# (RADMODES BIT1) SO THE REPOSITION ROUTINE WON'T
# INITIATE PROGRAM ALARM 00501. A CHECK IS THEN MADE
# TO SEE IF A PROGRAM IS USING THE RR (STATE BIT 7). IF
# SO, THE PROGRAM EXITS TO ENDRADAR SO THAT THE RR CDU
# FAIL FLAG (RADMODES BIT 7) CAN BE CHECKED BEFORE
# RETURNING TO THE WAITING PROGRAM. IF NOT, THE PROGRAM EXITS
# TO TASKOVER.
#
# CALLING SEQUENCE: WAITLIST TASK FROM RRAUTCHK IF THE RR POWER-ON AUTO
2016-12-28 16:11:25 +00:00
# BIT (CHAN 33 BIT 2) CHANGES TO 0 AND NO PROGRAM WAS USING
# THE RR (STATE BIT 7).
#
# ERASABLE INITIALIZATION REQUIRED:
#
# RADMODES, STATE
#
# SUBROUTINES CALLED: RRZEROSB, FIXDELAY, TASKOVER, ENDRADAR
#
# JOBS OR TASKS INITIATED:
2016-12-28 16:11:25 +00:00
#
# NONE
#
# ALARMS: NONE (SEE RRZEROSB)
#
# EXIT: TASKOVER, ENDRADAR (WAITING PROGRAM)
BANK 24
SETLOC P20S1
BANK
2016-12-28 16:11:25 +00:00
EBANK= LOSCOUNT
COUNT* $$/RSUB
RRTURNON TC RRZEROSB
TC FIXDELAY # WAIT 1 SEC BEFORE REMOVING TURN ON FLAG
DEC 100 # SO A MONITOR REPOSITION WON'T ALARM.
CS TURNONBT
MASK RADMODES
TS RADMODES
TCF TASKOVER
# Page 527
# PROGRAM NAME: RRZEROSB
#
# FUNCTIONAL DESCRIPTION:
#
# RRZEROSB IS A CLOSED SUBROUTINE TO ZERO THE RR CDU'S,
# DETERMINE THE RR MODE, AND TURN ON THE TRACKER FAIL
# LAMP IF REQUIRED. INITIALLY THE RR CDU ZERO BIT (CHAN 12
# BIT 1) IS SET. FOLLOWING A 20 MILLISECOND WAIT, THE LGC
2016-12-28 16:11:25 +00:00
# RR CDU COUNTERS (OPTY, OPTX) ARE SET = 0 AFTER
# WHICH THE RR CDU ZERO DISCRETE (CHAN 12 BIT 1) IS
# REMOVED. A 4 SECOND WAIT IS SET TO ALL THE RR CDU'S
# TO REPEAT THE ACTUAL TRUNNION AND SHAFT ANGLES. THE
# RR CDU ZERO FLAG (RADMODES BIT 13) IS REMOVED. THE
# CONTENTS OF OPTY IS THEN CHECKED TO SEE IF THE TRUNNION
# ANGLE IS LESS THAN 90 DEGREES. IF NOT, BIT 12 OF
# RADMODES IS SET = 1 TO INDICATE RR ANTENNA MODE 2.
# IF LESS THAN 90 DEGREES, BIT 12 OF RADMODES IS SET = 0 TO
# INDICATE RR ANTENNA MODE 1. SETTRKF IS THEN CALLED TO
# SEE IF THE TRACKER FAIL LAMP SHOULD BE TURNED ON.
#
# CALLING SEQUENCE: L TC RRZEROSB (FROM RRTURNON AND RRZERO)
#
# ERASABLE INITIALIZATION REQUIRED:
#
# RADMODES (BIT 13 SET), DSPTAB +11D
#
# SUBROUTINES CALLED: FIXDELAY, MAGSUB, SETTRKF
#
# JOBS OR TASKS INITIATED:
#
# NONE
#
# ALARMS: TRAKCER FAIL
#
# EXIT: L +1 (ALWAYS)
RRZEROSB EXTEND
QXCH RRRET
CAF BIT1 # BIT 13 OF RADMODES MUST BE SET BEFORE
EXTEND # COMING HERE.
WOR CHAN12 # TURN ON ZERO RR CDU
TC FIXDELAY
DEC 2
2016-12-28 16:11:25 +00:00
CAF ZERO
TS CDUT
TS CDUS
CS ONE # REMOVE ZEROING BIT.
EXTEND
WAND CHAN12
TC FIXDELAY
DEC 1000 # RESET FAIL INHIBIT IN 10 SECS. -- D.281
2016-12-28 16:11:25 +00:00
CS RCDU0BIT # REMOVE ZEROING IN PROCESS BIT
# Page 528
MASK RADMODES
TS RADMODES
2016-12-28 16:11:25 +00:00
CA CDUT
TC MAGSUB
DEC -.5
TCF +3 # IF MODE 2.
2016-12-28 16:11:25 +00:00
CAF ZERO
TCF +2
CAF ANTENBIT
XCH RADMODES
MASK -BIT12
ADS RADMODES
2016-12-28 16:11:25 +00:00
TC SETTRKF # TRACKER LAMP MIGHT GO ON NOW.
2016-12-28 16:11:25 +00:00
TC RRRET # DONE.
-BIT12 EQUALS -1/8 # IN SPROOT
# Page 529
# PROGRAM NAME: DORREPOS
#
# FUNCTIONAL DESCRIPTION:
#
# DORREPOS IS A SEQUENCE OF TASKS TO DRIVE THE RENDEZVOUS RADAR
# TO A SAFE POSITION. INIITALLY SETRRECR IS CALLED WHERE THE RR
# ERROR COUNTERS (CHAN 12 BIT 2) ARE ENABLED AND LASTYCMD
# AND LASTXCMD SET = 0 TO INDICATE THE DIFFERENCE BETWEEN THE
# DESIRED STATE AND PRESENT STATE OF THE COMMANDS. THE RR
# TURN-ON FLAG (RADMODES BIT 1) IS CHECKED AND IF NOT PRESENT,
# PROGRAM ALARM 00501 IS REQUESTED BEFORE CONTINUING. IN EITHER
# CASE, FOLLOWING A 20 MILLISECOND WAIT THE PROGRAM CHECKS THE CURRENT
# RR ANTENNA MODE (RADMODES BIT 12). RRTONLY IS THEN CALLED
# TO DRIVE THE TRUNNION ANGLE TO 0 DEGREES IF IN MODE 1 AND TO 180
# DEGREES IF IN MODE 2. UPON RETURN, THE CURRENT RR ANTENNA
# MODE (RADMODES BIT 12) IS AGAIN CHECKED. RRSONLY IS THEN
# CALLED TO DRIVE THE SHAFT ANGLE TO 0 DEGREES IF IN MODE 1 AND TO
# -90 DEGREES IF IN MODE 2. IF DURING RRTONLY OR RRSONLY A
# REMODE HAS BEEN REQUESTED (RADMODES BIT 14), AND ALWAYS
# FOLLOWING COMPLETION OF RRSONLY, CONTROL IS TRANFERRED TO
2016-12-28 16:11:25 +00:00
# REPOSRPT. HERE THE REPOSITION FLAG (RADMODES BIT 11) IS
# REMOVED. A CHECK IS THEN MADE ON THE DESIGNATE FLAG (RADMODES
# BIT 10). IF PRESENT, CONTROL IS TRANSFERRED TO BEGDES. IF NOT PRESENT
# INDICATING NO FURTHER ANTENNA CONTROL REQUIRED, THE RR ERROR
# COUNTER BIT (CHAN 12 BIT 2) IS REMOVED AND THE ROUTINE EXITS TO
# TASKOVER.
#
# CALLING SEQUENCE:
#
# WAITLIST CALL FROM RRGIMON IF TRUNNION AND SHAFT CDU ANGLES
# NOT WITHIN LIMITS OF CURRENT MODE.
#
# ERASABLE INITIALIZATION REQUIRED:
#
# RADMODES
#
# SUBROUTINES CALLED
#
# RRTONLY, RRSONLY, BEGDES (EXIT)
#
# JOBS OR TASKS INITIATED:
#
# NONE
#
# ALARMS: NONE
#
# EXIT: TASKOVER, BEGDES
DORREPOS TC SETRRECR # SET UP RR CDU ERROR COUNTERS.
# ALARM 501 DELETED IN DANCE 279 PER PCR 97.
TC FIXDELAY
DEC 2
2016-12-28 16:11:25 +00:00
CAF ANTENBIT # MANEUVER TRUNNION ANGLE TO NOMINAL POS.
# Page 530
MASK RADMODES
CCS A
CAF BIT15 # 0 FOR MODE 1 AND 180 FOR MODE 2.
TC RRTONLY
2016-12-28 16:11:25 +00:00
CAF ANTENBIT # NOT PUT SHAFT IN RIGHT POSITION
MASK RADMODES
CCS A
CS HALF # -90 FOR MODE 2.
TC RRSONLY
2016-12-28 16:11:25 +00:00
REPOSRPT CS REPOSBIT # RETURNS HERE FROM RR1AXIS IN REMODE
# REQUESTED DURING REPOSITION.
MASK RADMODES # REMOVE REPOSITION BIT.
TS RADMODES
MASK DESIGBIT # SEE IF SOMEONE IS WAITING TO DESIGNATE.
CCS A
TCF BEGDES
CS BIT2 # IF NO FURTHER ANTENNA CONTROL REQUIRED,
EXTEND # REMOVE ERROR COUNTER ENABLE.
WAND CHAN12
TCF TASKOVER
2016-12-28 16:11:25 +00:00
SETRRECR CAF BIT2 # SET UP RR ERROR COUNTERS
EXTEND
RAND CHAN12
CCS A # DO NOT CLEAR LAST COMMAND IF
TC Q # ERROR COUNTERS ARE ENABLED
2016-12-28 16:11:25 +00:00
TS LASTYCMD
TS LASTXCMD
CAF BIT2
EXTEND
WOR CHAN12 # ENABLE RR CDU ERROR COUNTERS.
TC Q
# Page 531
# PROGRAM NAME: REMODE
#
# FUNCTIONAL DESCRIPTION
#
# REMODE IS THE GENERAL REMODING SUBROUTINE. IT DRIVES THE
# TRUNNION ANGLE TO 0 DEGREES IF THE CURRENT MODE IS MODE 1,
# 180 DEGREES FOR MODE 2, THEN DRIVES THE SHAFT ANGLE TO -45
# DEGREES, AND FINALLY DRIVES THE TRUNNION ANGLE TO -130 DEGREES,
# TO PLACE THE RR IN MODE 2, -50 DEGREES FOR MODE 1, BEFORE
# INITIATING 2-AXIS CONTROL. ALL REMODING IS DONE WITH SINGLE
# AXIS ROTATIONS (RR1AXIS). INITIALLY THE RR ANTENNA MODE FLAG
# (RADMODES BIT 12) IS CHECKED. CONTROL IS THEN TRANSFERRED TO
# RRTONLY TO DRIVE THR TRUNNION ANGLE TO 0 DEGREES IF IN MODE 1
# OR 180 DEGREES IF IN MODE 2. RRSONLY IS THEN CALLED TO DRIVE
# THE SHAFT ANGLE TO -45 DEGREES. THE RR ANTENNA MODE FLAG
# (RADMODES BIT 12) IS CHECKED AGAIN. CONTROL IS AGAIN
# TRANSFERRED TO RRTONLY TO DRIVE THE TRUNNION ANGLE TO -130
# DEGREES TO PLACE THE RR IN MODE 2 IF CURRENTLY IN MODE 1 OR TO
# -50 DEGREES IF IN MODE 2 TO PLACE THE RR IN MODE 1. RMODINV
# IS THEN CALLED TO SET RADMODES BIT 12 TO INDICATE THE NEW
# RR ANTENNA MODE. THE REMODE FLAG (RADMODES BIT 14)
# IS REMOVED TO INDICATE THAT REMODING IS COMPLETE. THE PROGRAM
# THEN EXITS TO STDESIG TO BEGIN 2-AXIS CONTROL.
#
# CALLIN SEQUENCE:
#
# FROM BEGDES WHEN REMODE FLAG (RADMODES BIT 14) IS SET.
# THIS FLAG MAY BE SET IN RRDESSM AND RRDESNB IF RRLIMCHK
# DETERMINES THAT THE DESIRED ANGLES ARE WITHIN THE LIMITS OF THE
# OTHER MODE.
#
# ERASABLE INIITIALIZATION REQUIRED:
#
# RADMODES
#
# SUBROUTINES CALLED:
#
# RRTONLY, RRSONL, RMODINV (ACTUALLY PART OF)
#
# JOBS OR TASKS INITIATED:
#
# NONE
#
# ALARMS: NONE
#
# EXIT: STDESIG
REMODE CAF ANTENBIT # DRIVE TRUNNION TO 0 (180)
MASK RADMODES # (ERROR COUNTER ALREADY ENABLED)
CCS A
CAF BIT15
TC RRTONLY
2016-12-28 16:11:25 +00:00
CAF -45DEGSR
TC RRSONLY
# Page 532
CS RADMODES
MASK ANTENBIT
CCS A
CAF -80DEGSR # GO TO T = -130 (-50).
AD -50DEGSR
TC RRTONLY
2016-12-28 16:11:25 +00:00
CS RADMODES
MASK ANTENBIT
CCS A
CAF BIT15 # GO TO T = -180 (+0).
TC RRTONLY
2016-12-28 16:11:25 +00:00
CS RADMODES # GO TO S = -90 (+0).
MASK ANTENBIT
CCS A
CS HALF
TC RRSONLY
2016-12-28 16:11:25 +00:00
TC RMODINV
2016-12-28 16:11:25 +00:00
CS REMODBIT # END OF REMODE.
MASK RADMODES
TS RADMODES
2016-12-28 16:11:25 +00:00
CAF DESIGBIT # WAS REMODE CALLED DURING DESIGNATE?
MASK RADMODES # (BIT10 RADMODES = 1)
EXTEND
BZF RGOODEND # NO -- RETURN TO CALLER WAITING IN RADSTALL
TC STDESIG # YES -- RETURN TO DESIGNATE
-45DEGSR = 13,14,15
-50DEGSR DEC -.27778
-80DEGSR DEC -.44444
RMODINV LXCH RADMODES # INVERT THE MODE STATUS.
CAF ANTENBIT
EXTEND
RXOR LCHAN
TS RADMODES
TC Q
2016-12-28 16:11:25 +00:00
# Page 533
# PROGRAM NAMES: RRTONLY, RRSONLY
#
# FUNCTIONAL DESCRIPTION:
#
# RRTONLY AND RRSONLY ARE SUBROUTINES FOR DOING SINGLE AXIS
# RR MANEUVERS FOR REMODE AND REPOSITION. IT DRIVES TO
# WITHIN 1 DEGREE. INITIALLY, AT RR1AX2, THE REMODE AND REPOSITION
# FLAGS (RADMODES BITS 14, 11) ARE CHECKED. IF BOTH EXIST,
# THE PROGRAM EXITS TO REPOSRPT (SEE DORREPOS). THIS INDICATES
# THAT SOMEONE POSSIBLY REQUESTED A DESIGNATE (RADMODES BIT 10)
# WHICH REQUIRES A REMODE (RADMODES BIT 14) AND THAT A
# REPOSITION IS IN PROGRESS (RADMODES BIT 11). IF NONE
# OR ONLY ONE OF THE FLAGS EXIST, REMODE OR REPOSITION, MAGSUB
# IS CALLED TO SEE IF THE APPROPRIATE ANGLE IS WITHIN 1 DEGREE. IF YES,
# CONTROL RETURNS TO THE CALLING ROUTINE. IF NOT, CONTROL IS
# TRANSFERRED TO RROUT FOR SINGLE AXIS MANEUVERS WITH THE OTHER
# ANGLE SET = 0. FOLLOWING A .5 SECOND WAIT, THE ABOVE PROCEDURE IS
# REPEATED.
#
# CALLING SEQUENCE: L-1 CAF *ANGLE* (DESIRED ANGLE SCALED PI)
# L TC RRTONLY (TRUNNION ONLY)
# RRSONLY (SHAFT ONLY)
# RRTONLY IS CALLED BY PREPOS29;
# RRTONLY AND RRSONLY ARE CALLED BY DORREPOS AND REMODE
#
# ERASABLE INITIALIZATION REQUIRED:
#
# C(A) = DESIRED ANGLE, RADMODES
#
# SUBROUTINES CALLED:
#
# FIXDELAY, REPOSRPT, MAGSUB, RROUT
#
# JOBS OR TASKS INITIATED:
#
# NONE
#
# ALARMS: NONE
#
# EXIT: REPOSRPT (REMODE AND REPOSITION FLAGS PRESENT -- RADMODES
# BITS 14, 11)
# L+1 (ANGLE WITHIN ONE DEGREE OR RR OUT OF AUTO MODE)
RRTONLY TS RDES # DESIRED TRUNNION ANGLE.
CAF ZERO
TCF RR1AXIS
2016-12-28 16:11:25 +00:00
RRSONLY TS RDES # SHAFT COMMANDS ARE UNRESOLVED SINCE THIS
CAF ONE # ROUTINE ENTERED ONLY WHEN T = 0 OR 180.
2016-12-28 16:11:25 +00:00
RR1AXIS TS RRINDEX
EXTEND
QXCH RRRET
TCF RR1AX2
# Page 534
NXTRR1AX TC FIXDELAY
DEC 50 # 2 SAMPLES PER SECOND.
2016-12-28 16:11:25 +00:00
RR1AX2 CS RADMODES # IF SOMEONE REQUESTS A DESIGNATE WHICH
MASK PRIO22 # REQUIRES A REMODE AND A REPOSITION IS IN
EXTEND # PROGRESS, INTERRUPT IT AND START THE
BZF REPOSRPT # REMODE IMMEDIATELY.
2016-12-28 16:11:25 +00:00
CA RDES
EXTEND
INDEX RRINDEX
MSU CDUT
TS ITEMP1 # SAVE ERROR SIGNAL.
EXTEND
MP RRSPGAIN # TRIES TO NULL .7 OF ERROR OVER NEXT .5
TS L
CA RADMODES
MASK AUTOMBIT
XCH ITEMP1 # STORE RR-OUT-OF-AUTO-MODE BIT.
TC MAGSUB # SEE IF WITHIN ONE DEGREE.
DEC -.00555 # SCALED IN HALF-REVS.
2016-12-28 16:11:25 +00:00
CCS ITEMP1 # NO. IF RR OUT OF AUTO MODE, EXIT.
TC RRRET # RETURN TO CALLER.
2016-12-28 16:11:25 +00:00
CCS RRINDEX # COMMAND FOR OTHER AXIS IS ZERO.
TCF +2 # SETTING A TO 0.
XCH L
DXCH TANG
2016-12-28 16:11:25 +00:00
TC RROUT
2016-12-28 16:11:25 +00:00
TCF NXTRR1AX # COME BACK IN .5 SECONDS.
RRSPGAIN DEC .59062 # NULL .7 ERROR IN .5 SEC.
# Page 535
# PROGRAM NAME: RROUT
#
# FUNCTIONAL DESCRIPTION:
#
# RROUT RECEIVES RR GYRO COMMANDS IN TANG, TANG +1 IN RR
# ERROR COUNTER SCALING. RROUT THEN LIMITS THEM AND
# GENERATES COMMANDS TO THE CDU TO ADJUST THE ERROR COUNTERS
# TO THE DESIRED VALUES. INITIALLY MAGSUB CHECKS THE MAGNITUDE OF
# THE COMMAND (SHAFT ON 1ST PASS) TO SEE IF IT IS GREATER THAN
# 384 PULSES. IF NOT, CONTROL IS TRANFERRED TO RROUTLIM TO
# LIMIT THE COMMAND TO +384 OR -384 PULSES. THE DIFFERENCE IS
# THEN CALCULATED BETWEEN THE DESIRED STATE AND TEH PRESENT STATE OF
# THE ERROR COUNTER AS RECORDED IN LASTYCMD AND LASTXCMD.
# THE RESULT IS STORED IN OPTXCMD (1ST PASS) AND OPTYCMD (2ND
# PASS). FOLLOWING THE SECOND PASS, FOR THE TRUNNION COMMAND, THE
# OCDUT AND OCDUS ERROR COUNTER DRIVE BITS (CHAN 14 BITS 12, 11)
# ARE SET. THIS PROGRAM THEN EXITS TO THE CALLING PROGRAM.
#
# CALLING SEQUENCE:
2016-12-28 16:11:25 +00:00
#
# L TC RROUT (WITH RUPT INHIBITED) RROUT IS CALLED BY
# RRTONLY, RRSONLY, AND DODES
#
# ERASABLE INITIALIZATION REQURIED:
#
# TANG, TANG +1 (DESIRED COMMANDS), LASTYCMD, LASTXCMD
# (1ST PASS = 0), RR ERROR COUNTER ENAGLE SET (CHAN 12 BIT 2).
#
# SUBROUTINES CALLED:
#
# MAGSUB
#
# JOBS OR TASKS INITIATED:
#
# NONE
#
# ALARMS: NONE
#
# EXIT: L+1 (ALWAYS)
RROUT LXCH Q # SAVE RETURN
CAF ONE # LOOP TWICE.
RROUT2 TS ITEMP2
INDEX A
CA TANG
TS ITEMP1 # SAVE SIGN COMMAND FOR LIMITING.
2016-12-28 16:11:25 +00:00
TC MAGSUB # SEE IF WITHIN LIMITS.
-RRLIMIT DEC -384
TCF RROUTLIM # LIMIT COMMAND TO MAG OF 384.
2016-12-28 16:11:25 +00:00
SETRRCTR CA ITEMP1 # COUNT OUT DIFFERENCE BETWEEN DESIRED
INDEX ITEMP2 # STATE AND PRESENT STATE AS RECORDED IN
XCH LASTYCMD # LASTYCMD AND LASTXCMD
COM
# Page 536
AD ITEMP1
AD NEG0 # PREVENT +0 IN OUTCOUNTER
INDEX ITEMP2
TS CDUTCMD
2016-12-28 16:11:25 +00:00
CCS ITEMP2 # PROCESS BOTH INPUTS.
TCF RROUT2
2016-12-28 16:11:25 +00:00
CAF PRIO6 # ENABLE COUNTERS.
EXTEND
WOR CHAN14 # PUT ON CDU DRIVES S AND T
TC L # RETURN.
2016-12-28 16:11:25 +00:00
RROUTLIM CCS ITEMP1 # LIMIT COMMAND TO ABS VAL OF 384.
CS -RRLIMIT
TCF +2
CA -RRLIMIT
TS ITEMP1
TCF SETRRCTR +1
# Page 537
# ROUTINE TO ZERO THE RR CDUS AND DETERMINE THE ANTENNA MODE.
RRZERO CAF BIT11+1 # SEE IF MONITOR REPOSITION OR NOT IN AUTO
MASK RADMODES # IF SO, DON'T RE-ZERO CDUS.
CCS A
TCF RADNOOP # (IMMEDIATE TASK TO RGOODEND).
2016-12-28 16:11:25 +00:00
INHINT
CS RCDU0BIT # SET FLAG TO SHOW ZEROING IN PROGRESS.
MASK RADMODES
AD RCDU0BIT
TS RADMODES
2016-12-28 16:11:25 +00:00
CAF ONE
TC WAITLIST
EBANK= LOSCOUNT
2CADR RRZ2
2016-12-28 16:11:25 +00:00
CS RADMODES # SEE IF IN AUTO MODE.
MASK AUTOMBIT
CCS A
TCF ROADBACK
TC ALARM # AUTO DISCRETE NOT PRESENT -- TRYING
OCT 510
ROADBACK RELINT
TCF SWRETURN
2016-12-28 16:11:25 +00:00
RRZ2 TC RRZEROSB # COMMON TO TURNON AND RRZERO.
TCF ENDRADAR
2016-12-28 16:11:25 +00:00
BIT11+1 OCT 02001
# Page 538
# PROGRAM NAME: RRDESSM
#
# FUNCTIONAL DESCRIPTION:
#
# THIS INTERPRETIVE ROUTINE WILL DESIGNATE, IF DESIRED ANGLES ARE
# WITHIN THE LIMITS OF EITHER MODE, TO A LINE-OF-SIGHT (LOS) VECTOR
# (HALF-UNIT) KNOWN WITH RESPECT TO THE STABLE MEMBER PRESENT
# ORIENTATION. INITIALLY THE IMU CDU'S ARE READ AND CONTROL
# TRANSFERRED TO SMNB TO TRANSFORM THE LOS VECTOR FROM STABLE
# MEMBER TO NAVIGATION BASE COORDINATES (SEE STG MEMO 699)
# RRANGLES IS THEN CALLED TO CALCULATE THE RR GIMBAL ANGLES,
# TRUNNION AND SHAFT, FOR BOT THE PRESENT AND ALTERNATE MODE.
# RRLIMCHK IS CALLED TO SEE IF THE ANGLES CALCULATED FOR THE
# PRESENT MODE ARE WITHIN LIMITS. IF WITHIN LIMITS, THE RETUREN
# LOCATION IS INCREMENTED, INASMUCH AS NO VEHICLE MANEUVER IS
# REQUIRED, BEFORE EXITING TO STARTDES. IF NOT WITHIN THE LIMITS OF THE
# CURRENT MODE, TRYSWS IS CALLED. FOLLOWING INVERTING OF THE RR
# ANTENNA MODE FLAG (RADMODES BIT 12), RRLIMCHK IS CALLED
# TO SEE IF THE ANGLES CALCULATED FOR THE ALTERNATE MODE ARE WITHIN
# LIMITS. IF YES, THE RR ANTENNA MODE FLAG IS AGAIN INVERTED,
# THE REMODE FLAG (RADMODES BIT 14) SET, AND THE RETURN LOCATION
# INCREMENTED, TO INDICATE NO VEHICLE MANEUVER IS REQUIRED, BEFORE
# EXITING TO STARTDES. IF THESE ANGLES ARE NOT WITHIN LIMITS
# OF THE ALTERNATE MODE, THE RR ANTENNA MODE FLAG (RADMODES
# BIT 12) IS INVERTED BEFORE RETURNING DIRECTLY TO THE CALLING PROGRAM
# TO INDICATE THAT A VEHICLE MANEUVER IS REQUIRED.
#
# CALLING SEQUENCE:
#
# L STCALL RRTARGET (LOS HALF-UNIT VECTOR IN SM COORDINATES)
# L+1 RRDESM
# L+2 BASIC (VEHICLE MANEUVER REQUIRED)
# L+3 BASIC (NO VEHICLE MANEUVER REQUIRED)
#
# ERASABLE INITIALIZATION REQUIRED:
#
# RRTARGET, RADMODES
#
# SUBROUTINES CALLED:
#
# READCDUS, SMNB, RRANGLES, RRLIMCHK, TRYSWS (ACTUALLY
# PART OF), RMODINV
#
# JOBS OR TASKS INITIATED:
#
# NONE
#
# ALARMS: NONE
#
# EXIT: L+2 (NEITHER SET OF ANGLES ARE WITHIN LIMITS OF RELATED MODE)
# STARTDES (DESIGNATE POSSIBLE AT PRESENT VEHICLES ATTITUDE -- RETURNS
# TO L+3 FROM STARTDES)
RRDESSM STQ CLEAR
DESRET
# Page 539
RRNBSW
CALL # COMPUTES SINES AND COSINES, ORDER Y Z X
CDUTRIG
VLOAD CALL # LOAD VECTOR AND CALL TRANSFORMATION
RRTARGET
*SMNB*
2016-12-28 16:11:25 +00:00
CALL # GET RR GIMBAL ANGLES IN PRESENT AND
RRANGLES # ALTERNATE MODE.
EXIT
2016-12-28 16:11:25 +00:00
INHINT
TC RRLIMCHK
ADRES MODEA # CONFIGURATION FOR CURRENT MODE.
TC +3 # NOT IN CURRENT MODE
OKDESSM INCR DESRET # INCREMENT SAYS NO VEHICLE MANEUVER REQ.
TC STARTDES # SHOW DESIGNATE REQUIRED
CS FLAGWRD8
MASK SURFFBIT # CHECK IF ON LUNAR SURFACE (SURFFLAG=P22F)
EXTEND
BZF NORDSTAL # BRANCH -- YES -- CANNOT DESIGNATE IN MODE 2
TC TRYSWS
LUNDESCH CS FLAGWRD8 # OVERFLOW RETURN FROM RRANGLES
MASK SURFFBIT # CHECK IF ON LUNAR SURFACE
EXTEND
BZF NORDSTAL # BRANCH -- YES -- RETURN TO CALLER -- ALARM 527
CA STATE
MASK RNDVZBIT
CCS A # TEST RNDVZFLG
TC NODESSM # NOT ON MOON -- CALL FOR ATTITUDE MANEUVER
TCF ENDOFJOB # ... BUT NOT IN R29.
2016-12-28 16:11:25 +00:00
# Page 540
# PROGRAM NAME: STARTDES
#
# FUNCTIONAL DESCRIPTION:
#
# STARTDES IS ENTERED WHEN WE ARE READY TO BEGIN DESIGNATION.
# BIT 14 OF RADMODES IS ALREADY SET IF A REMODE IS REQUIRED.
# AT THIS TIME, THE RR ANTENNA MAY BE IN A REPOSITON
# OPERATION. IN THIS CASE, IF A REMODE IS REQUIRED IT MAY HAVE
# ALREADY BEGUN BUT IN ANY CASE THE REPOSITION WILL BE INTERRUPTED.
# OTHERWISE, THE REPOSITION WILL BE COMPLETED BEFORE 2-AXIS
# DESIGNATION BEGINS. INITIALLY DESCOUNT IS SET = 60 TO INDICATE
# THAT 30 SECONDS WILL BE ALLOWED FOR THE RR DATA GOOD INBIT
# (CHAN 33 BIT 4) IF LOCK-ON IS DESIRED (STATE BIT 5). BIT 10
# OF RADMODES IS SET TO SHOW THAT A DESIGNATE IS REQUIRED.
# THE REPOSITON FLAG (RADMODES BIT 11) IS CHECKED. IF SET,
# THE PROGRAM EXITS TO L+3 OF THE CALLING PROGRAM (SEE RRDESSM
# AND RRDESNB). THE PROGRAM WILL BEGIN DESIGNATING TO THE DESIRED
# ANGLES FOLLOWING THE REPOSITON OR REMODE IF ONE WAS
# REQUESTED. IF THE REPOSITON FLAG IS NOT SET, SETRRECR IS CALLED
# WITH SETS THE RR ERROR COUNTER ENABLE BIT (CHAN 12 BIT 2)
# AND SETS LASTYCMD AND LASTXCMD = 0 TO INDICATE THE
# DIFFERENCE BETWEEN THE PRESENT AND DESIRED STATE OF THE ERROR
# COUNTERS. A 20 MILLISECOND WAITLIST CALL IS SET FOR BEGDES
# AFTER WHICH THE PROGRAM EXITS TO L+3 OF TEH CALLING PROGRAM.
#
# CALLING SEQUENCE:
#
# FROM RRDESSM AND RRDESNB WHEN ANGLES WITHIN LIMITS.
#
# ERASABLE INITIALIZATION REQUIRED:
#
# RADMODES, (SEE DODES)
#
# SUBROUTINES CALLED
#
# SETRRECR, WAITLIST
#
# JOBS OR TASKS INITIATED:
#
# BEGDES
#
# ALARMS: NONE
#
# EXIT: L+3 OF CALLING PROGRAM (SEE RRDESSM)
# L+2 OF CALLING PROGRAM (SEE RRDESNB)
STARTDES INCR DESRET
CS RADMODES
MASK DESIGBIT
ADS RADMODES
MASK REPOSBIT # SEE IF REPOSITIONING IN PROGRESS.
CCS A
TCF DESRETRN # ECTR ALREADY SET UP.
2016-12-28 16:11:25 +00:00
TC SETRRECR # SET UP ERROR COUNTERS.
# Page 541
CAF TWO
TC WAITLIST
EBANK= LOSCOUNT
2CADR BEGDES
2016-12-28 16:11:25 +00:00
DESRETRN CA RADCADR # FIRST PASS THRU DESIGNATE
EXTEND
BZF DESRTRN # YES SET EXIT
TC ENDOFJOB # NO
DESRTRN RELINT
INCR DESRET
CA DESRET
TCF BANKJUMP
2016-12-28 16:11:25 +00:00
NORDSTAL CAF ZERO # ZERO RADCADR TO WIPE OUT ANYONE
TS RADCADR # WAITING IN RADSTALL SINCE WE ARE NOW
TCF DESRTRN # RETURNING TO P20 AND MAY DO NEW RADSTALL
2016-12-28 16:11:25 +00:00
# Page 542
# SEE IF RRDESSM CAN BE ACCOMPLISHED AFTER A REMODE.
TRYSWS TC RMODINV # (NOTE RUPT INHIBIT)
TC RRLIMCHK # TRY DIFFERENT MODE.
ADRES MODEB
TCF NODESSM # VEHICLE MANEUVER REQUIRED
2016-12-28 16:11:25 +00:00
TC RMODINV # RESET BIT12
CAF REMODBIT # SET FLAG FOR REMODE.
ADS RADMODES
2016-12-28 16:11:25 +00:00
TCF OKDESSM
2016-12-28 16:11:25 +00:00
NODESSM TC RMODINV # RE-INVERT MODE AND RETURN
INCR DESRET # TO CALLER +2
TCF NORDSTAL
2016-12-28 16:11:25 +00:00
MAXTRYS DEC 60
# Page 543
# DESIGNATE TO SPECIFIC RR GIMBAL ANGLES (INDEPENDENT OF VEHICLE MOTION). ENTER WITH DESIRED ANGLES IN
# TANG AND TANG +1.
RRDESNB TC MAKECADR
TS DESRET
2016-12-28 16:11:25 +00:00
TC DOWNFLAG # RESET FLAG TO PREVENT DODES FROM GOING
ADRES LOSCMFLG # BACK TO R21
CA MAXTRYS # SET TIME LIMIT COUNTER
TS DESCOUNT # FOR DESIGNATE
INHINT # SEE IF CURRENT MODE OK.
TC RRLIMNB # DO SPECIAL V41 LIMIT CHECK
ADRES TANG
TCF TRYSWN # SEE IF IN OTHER MODE.
2016-12-28 16:11:25 +00:00
OKDESNB RELINT
EXTEND
DCA TANG
DXCH TANGNB
TC INTPRET
2016-12-28 16:11:25 +00:00
CALL # GET LOS IN NB COORDS.
RRNB
STORE RRTARGET
2016-12-28 16:11:25 +00:00
SET EXIT
RRNBSW
2016-12-28 16:11:25 +00:00
INHINT
TCF STARTDES +1
TRYSWN TC RMODINV # SEE IF OTHER MODE WILL DO.
TC RRLIMNB # DO SPECIAL V41 LIMIT CHECK
ADRES TANG
TCF NODESNB # NOT POSSIBLE.
2016-12-28 16:11:25 +00:00
TC RMODINV
CAF REMODBIT # CALL FOR REMODE.
ADS RADMODES
TCF OKDESNB
2016-12-28 16:11:25 +00:00
NODESNB TC RMODINV # REINVERT MODE BIT.
TC ALARM # BAD INPUT ANGLES.
OCT 502
TC CLRADMOD
TC ENDOFJOB # AVOID 503 ALARM.
2016-12-28 16:11:25 +00:00
RRLIMNB INDEX Q # THIS ROUTINE IS IDENTICAL TO RRLIMCHK
CAF 0 # EXCEPT THAT THE MODE 1 SHAFT LOWER
INCR Q # LIMIT IS -85 INSTEAD OF -70 DEGREES
EXTEND
# Page 544
INDEX A # READ GIMBAL ANGLES INTO ITEMP STORAGE
DCA 0
DXCH ITEMP1
LXCH Q # L(CALLER +2) TO L
2016-12-28 16:11:25 +00:00
CAF ANTENBIT # SEE WHICH MODE RR IS IN
MASK RADMODES
CCS A
TCF MODE2CHK # MODE 2 CAN USE RRLIMCHK CODING
CA ITEMP1
TC MAGSUB # MODE 1 IS DEFINED AS
DEC -.30555 # 1 ABS(T) L 55 DEGS
TC L # 2 SHAFT LIMITS AT +59, -85 DEGS
2016-12-28 16:11:25 +00:00
CA ITEMP2 # LOAD SHAFT ANGLE
EXTEND
BZMF NEGSHAFT # IF NEGATIVE SHAFT ANGLE, ADD 20.5 DEGS
AD 5.5DEGS
SHAFTLIM TC MAGSUB
DEC -.35833 # 64.5 DEGREES
TC L # NOT IN LIMITS
TC RRLIMOK # IN LIMITS
NEGSHAFT AD 20.5DEGS # MAKE NEGATIVE SHAFT LIMIT -85 DEGREES
TCF SHAFTLIM
2016-12-28 16:11:25 +00:00
20.5DEGS DEC .11389
# Page 545
# PROGRAM NAME: BEGDES
#
# FUNCTIONAL DESCRIPTION:
#
# BEGDES CHECKS VARIOUS DESIGNATE REQUESTS AND REQUESTS THE
# ACTUAL RR DESIGNATION. INITIALLY A CHECK IS MADE TO SEE IF A
# REMODE (RADMODES BIT 14) IS REQUESTED OR IN PROGRESS. IF SO,
# CONTROL IS TRANFERRED TO STDESIG AFTER ROUTINE REMODE IS
# EXECUTED. IF NO REMODE, STDESIG IS IMMEDIATELY CALLED WHERE
# FIRST THE REPOSITION FLAG (RADMODES BIT 11) IS CHECKED. IF
# PRESENT, THE DESIGNATE FLAG (RADMODES BIT 10) IS REMOVED
# AFTER WHICH THE PROGRAM EXITS TO RDBADEND. IF THE REPOSITION
# FLAG IS NOT PRESET, THE CONTINUOUS DESIGNATE FLAG (RADMODES
# BIT 15) IS CHECKED. IF PRESENT, AN EXECUTIVE CALL IS IMMEDIATELY
# MADE FOR DODES AFTER WHICH A .5 SECOND WAIT IS INITIATED BEFORE
# REPEATING AT STDESIG. IF THE RR SEARCH ROUTINE (LRS24.1) IS DESIGNATING
# TO A NEW POINT (NEWPTFLG SET) THE CURRENT DESIGNATE TASK IS TERMINATED.
# IF CONTINUOUS DESIGNATE IS NOT WANTED, THE DESIGNATE FLAG (RADMODES
# BIT 10) IS CHECKED. IF NOT PRESENT, THE PROGRAM EXITS TO ENDRADAR TO
# CHECK RR CDU FAIL BEFORE RETURNING TO THE CALLING PROGRAM. IF DESIGNATE
# IS STILL REQUIRED, DESCOUNT IS CHECKED TO SEE IF THE 30 SECONDS HAS
# EXPIRED BEFORE RECEIVING THE RR DATA GOOD (CHAN 33 BIT 4)
# SIGNAL. IF OUT OF TIME, PROGRAM ALARM 00503 IS REQUESTED, THE
# RR AUTO TRACKER ENABLE AND RR ERROR COUNTER ENABLE
# (CHAN 12 BITS 14,2) BITS REMOVED, AND THE DESIGNATE FLAG
# (RADMODES BIT 10) REMOVED BEFORE EEXITING TO RDBADEND. IF
# TIME HAS NOT EXPIRED, DESCOUNT IS DECREMENTED, THE
# EXECUTIVE CALL MADE FOR DODES, AND A .5 SECOND WAIT INITIATED
# BEFORE REPEATING THIS PROCEDURE AT STDESIG.
#
# CALLING SEQUENCE:
#
# WAITLIST CALL FROM STARTDES
# TCF BEGDES FROM DORREPOS
# TC STDESIG RETURNING, FROM REMODE
#
# ERASABLE INITIALIZATION REQUIRED:
#
# DESCOUNT, FINDVAC
#
# JOBS OR TASKS INITIATED: DODES
#
# ALARMS: PROGRAM ALARM 00503 (30 SECONDS HAVE EXPIRED) WITH NO RR DATA
# GOOD (CHAN 33 BIT 4) RECEIVED WHEN LOCK-ON (STATE BIT 5) WAS REQUESTED.
#
# EXIT: TASKOVER (SEARCH PATTERN DESIGNATING TO NEW POINT)
# ENDRADAR (NO DESIGNATE -- RADMODES BIT 10)
# RDBADEND (REPOSITION OR 30 SECONDS EXPIRED)
BEGDES CS RADMODES
# Page 546
MASK REMODBIT
CCS A
TC STDESIG
TC REMODE
DESLOOP TC FIXDELAY # 2 SAMPLES PER SECOND.
DEC 50
2016-12-28 16:11:25 +00:00
STDESIG CAF REPOSBIT
MASK RADMODES # SEE IF GIMBAL LIMIT MONITOR HAS FOUND US
CCS A # OUT OF BOUNDS. IF SO, THIS BIT SHOWS A
TCF BADDES # REPOSITION TO BE IN PROGRESS.
2016-12-28 16:11:25 +00:00
CCS RADMODES # SEE IF CONTINUOUS DESIGNATE WANTED.
TCF +3 # IF SO, DON'T CHECK BIT 10 TO SEE IF IN
TCF +2 # LIMITS BUT GO RIGHT TO FINDVAC ENTRY.
TCF MOREDES +1
2016-12-28 16:11:25 +00:00
CS RADMODES # IF NON-CONTINUOUS, SEE IF END OF
MASK DESIGBIT # PROBLEM (DATA GOOD IF LOCK-ON WANTED OR
CCS A # WITHIN LIMITS IF NOT). IF SO, EXIT AFTER
TCF ENDRADAR # CHECKING RR CDU FAIL.
2016-12-28 16:11:25 +00:00
STDESIG1 CCS DESCOUNT # SEE IF THE TIME LIMIT HAS EXPIRED
TCF MOREDES
2016-12-28 16:11:25 +00:00
CS B14+B2 # IF OUT OF TIME, REMOVE ECR ENABLE + TRKR
EXTEND
WAND CHAN12
BADDES CS DESIGBIT # REMOVE DESIGNATE FLAG
MASK RADMODES
TS RADMODES
TCF RDBADEND
2016-12-28 16:11:25 +00:00
MOREDES TS DESCOUNT
CAF PRIO26 # UPDATE GYRO TORQUE COMMANDS.
TC FINDVAC
EBANK= LOSCOUNT
2CADR DODES
2016-12-28 16:11:25 +00:00
TCF DESLOOP
2016-12-28 16:11:25 +00:00
B14+B2 OCT 20002
# Page 547
# PROGRAM NAME: DODES
#
# FUNCTIONAL DESCRIPTION:
#
# DODES CALCULATES AND REQUESTS ISSUANCE OF RR GYRO TORQUE
# COMMANDS. INITIALLY THE CURRENT RR CDU ANGLES ARE STORED AND
# THE LOS HALF-UNIT VECTOR TRANSFORMED FROM STABLE MEMBER TO
# NAVIGATION BASE COORDINATES VIA SMNB IF NECESSARY. THE
# SHAFT AND TRUNNION COMMANDS ARE THEN CALCULATED AS FOLLOWS:
# + SHAFT = LOS . (COS(S), 0, -SIN(S)) (DOT PRODUCT)
# - TRUNNION = LOS . (SIN(T)SIN(S), COS(T), SIN(T)COS(S))
# THE SIGN OF THE SHAFT COMMAND IS THEN REVERSED IF IN MODE 2
2016-12-28 16:11:25 +00:00
# (RADMODES BIT 12) BECAUSE A RELAY IN THE RR REVERSES THE
# POLARITY OF THE COMMAND. AT RRSCALUP EACH COMMAND IS
# SCALED AND IF EITHER, OR BOTH, OF THE COMMANDS IS GREATER THAN
2016-12-28 16:11:25 +00:00
# .5 DEGREES, MPAC +1 IS SET POSITIVE. IF A CONTINUOUS DESIGNATE
# (RADMODES BIT 15) IS DESIRED AND THE SEARCH ROUTINE IS NOT OPERATING,
# THE RR AUTO TRACKER ENABLE BIT (CHAN 12 BIT 14) IS CLEARED AND RROUT
# CALLED TO PUT OUT THE COMMANDS PROVIDED NO REPOSITION (RADMODES BIT 11)
# IS IN PROGRESS. IF A CONTINUOUS DESIGNATE AND THE SEARCH ROUTINE IS
# OPERATING (SRCHOPT FLAT SET) THE TRACK ENABLE IS NOT CLEARED. IF NO
# CONTINUOUS DESIGNATE AND BOTH COMMANDS ARE NOT LESS THAN .5 DEGREES AS
# INDICATED BY MPAC +1, THE RR AUTO TRACKER ENABLE BIT (CHAN 12 BIT 14) IS
# CLEARED AND RROUT CALLED TO PUT OUT THE COMMANDS PROVIDED NO REPOSITON
# (RADMODES BIT 11) IS IN PROGRESS. IF BOTH COMMANDS ARE LESS THAN .5
# DEGREES AS INDICATED BY MPAC+1, THE RR AUTO TRACKER ENABLE BIT
# (CHAN 12 BIT 14) IS CLEARED AND RROUT CALLED TO PUT OUT THE
# COMMANDS PROVIDED NO REPOSITION (RADMODES BIT 11) IS IN
# PROGRESS. IF BOTH COMMANDS ARE LESS THAN .5 DEGREES, THE
# LOCK-ON FLAG (STATE BIT 5) IS CHECKED. IF NOT PRESETN, THE
# DESIGNATE FLAG (RADMODES BIT 10) IS CLEARED, AND ENDOFJOB
# CALLED. IF LOCK-ON IS DESIRED, THE RR AUTO TRACKER (CHAN 12
# BIT 14) IS ENABLED FOLLOWED BY A CHECK OF THE RECEIPT OF THE
# RR DATA GOOD (CHAN 33 BIT 4) SIGNAL. IF RR DATA GOOD
# PRESENT, THE DESIGNATE FLAG (RADMODES BIT 10) IS CLEARED,
# THE RR ERROR COUNTER ENABLE BIT (CHAN 12 BIT 2) IS CLEARED,
# AND ENDOFJOB CALLED. IF RR DATA GOOD IS NOT PRESENT, RROUT
# IS CALLED TO PUT OUT THE COMMANDS PROVIDED NO REPOSITION
# (RADMODES BIT 11) IS IN PROGRESS AFTER WHICH THE JOB IS TERMINATED
# VIA ENDOFJOB.
#
# CALLING SEQUENCE:
#
# EXECUTIVE CALL EVERY .5 SECONDS FROM BEGDES.
#
# ERASABLE INITIALIZATION REQUIRED:
#
# RRTARGET (HALF-UNIT LOS VECTOR IN EITHER SM OR NB COORDINATES),
# LOKONSW (STATE BIT 5), RRNBSW (STATE BIT 6), RADMODES
#
# SUBROUTINES CALLED:
#
# READCDUS, SMNB, CDULOGIC, MAGSUB, RROUT
# Page 548
#
# JOBS OR TASKS INITIATED:
#
# NONE
#
# ALARMS: NONE
#
# EXIT: ENDOFJOB (ALWAYS)
DODES EXTEND
DCA CDUT
DXCH TANG
2016-12-28 16:11:25 +00:00
TC INTPRET
2016-12-28 16:11:25 +00:00
SETPD VLOAD
0
RRTARGET
BON VXSC
RRNBSW
DONBRD # TARGET IN NAV-BASE COORDINATES
MLOSV # MULTIPLY UNIT LOS BY MAGNITUDE
VSL1 PDVL
LOSVEL
VXSC VAD # ADD ONE SECOND RELATIVE VELOCITY TO LOS
MCTOMS
UNIT CALL
CDUTRIG
CALL
*SMNB*
2016-12-28 16:11:25 +00:00
DONBRD STODL 32D
TANG +1
RTB PUSH # SHAFT COMMAND = V(32D).(COS(S), 0,
CDULOGIC # -SIN(S)).
SIN PDDL # SIN(S) TO 0 AND COS(S) TO 2.
COS PUSH
DMP PDDL
32D
36D
DMP BDSU
0
STADR
STORE TANG +1 # SHAFT COMMAND
2016-12-28 16:11:25 +00:00
SLOAD RTB
TANG
CDULOGIC
PUSH COS # COS(T) TO 4.
PDDL SIN
PUSH DMP # SIN(T) TO 6.
2
# Page 549
SL1 PDDL # DEFINE VECTOR U = [SIN(T)SIN(S)]
4 # [ COS(T) ]
PDDL DMP # [SIN(T)COS(S)]
6
0
SL1 VDEF
DOT EXIT # DOT U WITH LOS TO GET TRUNNION COMMAND.
32D
2016-12-28 16:11:25 +00:00
# Page 550
# AT THIS POINT WE HAVE A ROTATION VECTOR IN DISH AXES LYING IN THE TS PLANE. CONVERT THIS TO A
# COMMANDED RATE AND ENABLE THE TRACKER IF WE ARE WITHIN .5 DEGREES OF THE TARGET.
CS MPAC # DOT WAS NEGATIVE OF DESREG ANGLE.
EXTEND
MP RDESGAIN # SCALING ON INPUT ANGLE WAS 4 RADIANS.
TS TANG # TRUNNION COMMAND.
CS RADMODES # A RELAY IN THE RR REVERSES POLARITY OF
MASK BIT12 # THE SHAFT COMMANDS IN MODE 2 SO THAT A
EXTEND # POSITIVE TORQUE APPLIED TO THE SHAFT
BZF +3 # GYRO CAUSES A POSITIVE CHANGE IN THE
CA TANG +1 # SHAFT ANGLE. COMPENSATE FOR THIS SWITCH
TCF +2 # BY CHANGING THE POLARITY OF OUR COMMAND.
+3 CS TANG +1
EXTEND
MP RDESGAIN # SCALING ON INPUT ANGLE WAS 4 RADIANS.
TS TANG +1 # SHAFT COMMAND FOR RROUT
TC INTPRET
2016-12-28 16:11:25 +00:00
DLOAD DMP
2 # COS(S).
4 # COS(T).
SL1 PDDL # Z COMPONENT OF URR.
DCOMP PDDL # Y COMPONENT = -SIN(T)
0 # SIN(S).
DMP SL1
4 # COS(T).
VDEF BON # FORM URR IN NB AXES.
RRNBSW # BYPASS NBSM CONVERSION IN VERB 41
+3
CALL
*NBSM* # GET URR IN SM AXES.
DOT EXIT
RRTARGET # GET COSIN OF ANGLE BETWEEN RR AND LOS
2016-12-28 16:11:25 +00:00
EXTEND
DCS COS1/2DG
DAS MPAC # DIFFERENCE OF COSINES, SCALED B-2.
CCS MPAC
CA ZERO # IF COS ERROR BIGGER, ERROR IS SMALLER
TCF +2
CA ONE
TS MPAC +1 # ZERO IF RR IS POINTED OK, ONE IF NOT.
# Page 551
# SEE IF TRACKER SHOULD BE ENABLED OR DISABLED.
CCS RADMODES # IF CONTINUOUS DESIGNATE WANTED, PUT OUT
TCF SIGNLCHK # COMMANDS WITHOUT CHECKING MAGNITUDE OF
TCF SIGNLCHK # ERROR SIGNALS
TCF DORROUT
SIGNLCHK CCS MPAC +1 # SEE IF BOTH AXES WERE WITHIN .5 DEGS.
TCF DGOODCHK
CS STATE # IF WITHIN LIMITS AND NO LOCK-ON WANTED,
MASK LOKONBIT # PROBLEM IS FINISHED.
CCS A
TCF RRDESDUN
2016-12-28 16:11:25 +00:00
CAF BIT14 # ENABLE THE TRACKER
EXTEND
WOR CHAN12
2016-12-28 16:11:25 +00:00
DGOODCHK CAF BIT4 # SEE IF DATA GOOD RECEIVED YET
EXTEND
RAND CHAN33
CCS A
TCF DORROUT
2016-12-28 16:11:25 +00:00
RRDESDUN CS BIT10 # WHEN PROBLEM DONE, REMOVE BIT 10 SO NEXT
MASK RADMODES # WAITLIST TASK WE WILL GO TO RGOODEND.
INHINT
TS RADMODES
2016-12-28 16:11:25 +00:00
TC DOWNFLAG # RESET LOSCMFLG TO PREENT A
ADRES LOSCMFLG # RECOMPUTATION OF LOS AFTER DATA GOOD
CS BIT2 # TURN OFF ENABLE RR ERROR COUNTER
EXTEND
WAND CHAN12
TCF ENDOFJOB # WITH ECTR DISABLED.
2016-12-28 16:11:25 +00:00
DORROUT CA FLAGWRD2 # IF BOTH LOSCMFLAG AND SEARCH FLAG ARE
MASK BIT12,14 # ZERO, BYPASS VELOCITY ADJUSTMENT TO LOS
EXTEND
BZF NOTP20
TC INTPRET
VLOAD VXSC # MULTIPLY UNIT LOS BY MAGNITUDE
RRTARGET
MLOSV
VSL1 PUSH
VLOAD VXSC # ADD .5 SEC. OF VELOCITY
LOSVEL # TO LOS VECTOR
MCTOMS
VSR1 VAD
UNIT
STODL RRTARGET # STORE VELOCITY-CORRECTED LOS (UNIT)
# Page 552
36D
STORE MLOSV # AND STORE MAGNITUDE
EXIT
NOTP20 INHINT
CS RADMODES # PUT OUT COMMAND UNLESS MONITOR
MASK REPOSBIT # REPOSITION HAS TAKEN OVER
CCS A
TC RROUT
2016-12-28 16:11:25 +00:00
CA FLAGWRD2
MASK LOSCMBIT # IF LOSCMFLG NOT SET, DON'T TEST
EXTEND # LOS COUNTER
BZF ENDOFJOB
CCS LOSCOUNT # TEST LOS COUNTER TO SEE IF TIME TO GET
TC DODESEND # A NEW LOS
INHINT
TC KILLTASK # YES -- KILL TASK WHICH SCHEDULES DODES
CADR DESLOOP +2
RELINT
CCS NEWJOB
TC CHANG1
TC BANKCALL
CADR R21LEM2
2016-12-28 16:11:25 +00:00
DODESEND TS LOSCOUNT
TC ENDOFJOB
2016-12-28 16:11:25 +00:00
RDESGAIN DEC .53624 # TRIES TO NULL .5 ERROR IN .5 SEC.
BIT12,14 EQUALS PRIO24 # OCT 24000
COS1/2DG 2DEC .999961923 B-2 # COSINE OF 0.5 DEGREES.
MCTOMS 2DEC 100 B-13
# Page 553
# RADAR READ INITIALIZATION
#
# RADAR DATA READ BY A BANKCALL FOR THE APPROPRIATE LEAD-IN BELOW.
LRALT TC INITREAD -1 # ONE SAMPLE PER READING.
ALLREAD OCT 17
LRVELZ TC INITREAD
OCT 16
2016-12-28 16:11:25 +00:00
LRVELY TC INITREAD
OCT 15
2016-12-28 16:11:25 +00:00
LRVELX TC INITREAD
OCT 14
2016-12-28 16:11:25 +00:00
RRRDOT TC INITREAD -1
OCT 12
2016-12-28 16:11:25 +00:00
RRRANGE TC INITREAD -1
OCT 11
2016-12-28 16:11:25 +00:00
# LRVEL IS THE ENTRY TO THE LR VELOCITY READ ROUTINE WHEN 5 SAMPLES ARE
# WANTED. ENTER WITH C(A)= 0,2,4 FOR LRVELZ,LRVELY,LRVELX RESP.
LRVEL TS TIMEHOLD # STORE VBEAM INDEX HERE MOMENTARILY
CAF FIVE # SPECIFY FIVE SAMPLES
INDEX TIMEHOLD
TCF LRVELZ
2016-12-28 16:11:25 +00:00
# Page 554
-1 CAF ONE # ENTRY TO TAKE ONLY 1 SAMPLE
INITREAD INHINT
TS TIMEHOLD # GET DT OF MIDPOINT OF NOMINAL SAMPLING
EXTEND # INTERVAL (ASSUMES NO BAD SAMPLES WILL BE
MP BIT3 # ENCOUNTERED).
DXCH TIMEHOLD
2016-12-28 16:11:25 +00:00
CCS A
TS NSAMP
AD ONE
# INSERT FOLLOWING INSTRUCTION TO GET 2N TRIES FOR N SAMPLES.
# DOUBLE
TS SAMPLIM
2016-12-28 16:11:25 +00:00
CAF DGBITS # READ CURRENT VALUE OF DATA GOOD BITS.
EXTEND
RAND CHAN33
TS OLDATAGD
2016-12-28 16:11:25 +00:00
CS ALLREAD
EXTEND
WAND CHAN13 # REMOVE ALL RADAR BITS
2016-12-28 16:11:25 +00:00
INDEX Q
CAF 0
EXTEND
WOR CHAN13 # SET NEW RADAR BITS
2016-12-28 16:11:25 +00:00
EXTEND
DCA TIME2
DAS TIMEHOLD # TIME OF NOMINAL MIDPOINT
2016-12-28 16:11:25 +00:00
CAF ZERO
TS L
DXCH SAMPLSUM
TCF ROADBACK
2016-12-28 16:11:25 +00:00
DGBITS OCT 230
# Page 555
# RADAR RUPT READER
#
# THIS ROUTINE STARTS FROM A RADARUPT. IT READS THE DATA & LOTS MORE.
SETLOC RADARUPT
BANK
2016-12-28 16:11:25 +00:00
COUNT* $$/RRUPT
RADAREAD EXTEND # MUST SAVE SBANK BECAUSE OF RUPT EXITS
ROR SUPERBNK # VIA TASKOVER (BADEND OR GOODEND).
TS BANKRUPT
EXTEND
QXCH QRUPT
2016-12-28 16:11:25 +00:00
CAF SEVEN
EXTEND
RAND CHAN13
TS DNINDEX
EXTEND # IF RADAR SELECT BITS ZERO, DO NOT STORE
BZF TRYCOUNT # DATA FOR DOWNLIST (ERASABLE PROBLEMS)
CA RNRAD
INDEX DNINDEX
TS DNRRANGE -1
TRYCOUNT CCS SAMPLIM
TCF PLENTY
TCF NOMORE
TC ALARM
OCT 520
TC RESUME
2016-12-28 16:11:25 +00:00
NOMORE CA FLGWRD11 # IS LRBYPASS SET?
MASK LRBYBIT
EXTEND
BZF BADRAD # NO. R12 IS ON -- BYPASS 521 ALARM.
2016-12-28 16:11:25 +00:00
CS FLAGWRD3 # CHECK R04FLAG.
MASK R04FLBIT # IF 1, R04 IS RUNNING. DO NOT ALARM
EXTEND
BZF BADRAD
2016-12-28 16:11:25 +00:00
TC ALARM # P20 WANTS THE ALARM.
OCT 521
BADRAD CS ONE
TS SAMPLIM
TC RDBADEND -2
PLENTY TS SAMPLIM
CAF BIT3
EXTEND
RAND CHAN13 # TO FIND OUT WHICH RADAR
EXTEND
# Page 556
BZF RENDRAD
2016-12-28 16:11:25 +00:00
TC R77CHECK # R77 QUITS HERE.
LRPOSCHK CA RADMODES # SEE IF LR IN DESIRED POSITION
EXTEND
RXOR CHAN33
MASK BIT6
EXTEND
BZF VELCHK
2016-12-28 16:11:25 +00:00
TC ALARM
OCT 522
TC BADRAD
2016-12-28 16:11:25 +00:00
VELCHK CAF BIN3 # = 00003 OCT
EXTEND
RXOR CHAN13 # RESET ACTIVITY BIT
MASK BIN3
EXTEND
BZF LRHEIGHT # TAKE A LR RANGE READING
2016-12-28 16:11:25 +00:00
CAF POSMAX
MASK RNRAD
AD LVELBIAS
TS L
CAE RNRAD
DOUBLE
MASK BIT1
DXCH ITEMP3
2016-12-28 16:11:25 +00:00
CAF BIT8 # DATA GOOD ISN'T CHECKED UNTIL AFTER READ-
TC DGCHECK # ING DATA SO SOME RADAR TESTS WILL WORK
# INDEPENDENT OF DATA GOOD.
2016-12-28 16:11:25 +00:00
CCS NSAMP
TC NOEND
GOODRAD CS ONE
TS SAMPLIM
CS ITEMP1 # WHEN ENOUGH GOOD DATA HAS BEEN GATHERED,
MASK RADMODES # RESET DATA FAIL FLAGS FOR SETTRKF.
TS RADMODES
TC RADLITES # LAMPS MAY GO OFF IF DATA JUST GOOD.
TC RGOODEND -2
2016-12-28 16:11:25 +00:00
NOEND TS NSAMP
RESAMPLE CCS SAMPLIM # SEE IF ANY MORE TRIES SHOULD BE MADE.
TCF +2
TCF DATAFAIL # N SAMPLES NOT AVAILABLE.
CAF BIT4 # RESET ACTIVITY BIT.
EXTEND
# Page 557
WOR CHAN13 # RESET ACTIVITY BIT
TC RESUME
2016-12-28 16:11:25 +00:00
LRHEIGHT CAF BIT5
TS ITEMP1 # (POSITION OF DATA GOOD BIT IN CHAN 33)
CAF BIT9
TC SCALECHK -1
2016-12-28 16:11:25 +00:00
RENDRAD CAF REPOSBIT # MAKE SURE ANTENNA HAS NOT GONE OUT OF
MASK RADMODES # LIMITS.
CCS A
TCF BADRAD
2016-12-28 16:11:25 +00:00
CS RADMODES # BE SURE RR CDU HASN'T FAILED.
MASK RCDUFBIT
CCS A
TCF BADRAD
2016-12-28 16:11:25 +00:00
CAF BIT4 # SEE IF DATA HAS BEEN GOOD.
TS ITEMP1 # (POSITION OF DATA GOOD BIT IN CHAN 33)
2016-12-28 16:11:25 +00:00
CAF BIT1 # SEE IF RR RDOT.
EXTEND
RAND CHAN13
TS Q # FOR LATER TESTING.
CCS A
TCF +2
TCF RADIN # NO SCALE CHECK FOR RR RDOT.
CAF BIT3
TS L
2016-12-28 16:11:25 +00:00
SCALECHK EXTEND
RAND CHAN33 # SCALE STATUS NOW
XCH L
MASK RADMODES # SCALE STATUS BEFORE
EXTEND
RXOR LCHAN # SEE IF THEY DIFFER
CCS A
TC SCALCHNG # THEY DIFFER.
2016-12-28 16:11:25 +00:00
RADIN CAF POSMAX
MASK RNRAD
TS ITEMP4
2016-12-28 16:11:25 +00:00
CAE RNRAD
DOUBLE
MASK BIT1
TS ITEMP3
# Page 558
CCS Q # SEE IF RR RDOT.
TCF SCALADJ # NO, BUT SCALE CHANGING MAY BE NEEDED.
2016-12-28 16:11:25 +00:00
EXTEND # IF RR RANGE RATE, THROW OUT BIAS
DCS RDOTBIAS
DASAMPL DAS ITEMP3
DGCHECK2 CA ITEMP1 # SEE THAT DATA HAS BEEN GOOD BEFORE AND
TC DGCHECK +1 # AFTER TAKING SAMPLE.
TC GOODRAD
2016-12-28 16:11:25 +00:00
SCALCHNG LXCH RADMODES
AD BIT1
EXTEND
RXOR LCHAN
TS RADMODES
CAF DGBITS # UPDATE LAST VALUE OF DATA GOOD BITS.
EXTEND
RAND CHAN33
TS OLDATAGD
TC UPFLAG # SET RNGSCFLG
ADRES RNGSCFLG # FOR LRS24.1
TCF BADRAD
2016-12-28 16:11:25 +00:00
# R77 MUST IGNORE DATA FAILS SO AS NOT TO DISTURB THE ASTRONAUT.
R77CHECK CS FLAGWRD5
MASK R77FLBIT
CCS A
TC Q # NOT R77
CS BITS5,8 # UPDATE LR DATA GOOD BITS IN RADMODES
MASK RADMODES
TS L
CA BITS5,8
EXTEND
RAND CHAN33
AD L
TS RADMODES
TC RGOODEND -2
BITS5,8 OCT 220
# Page 559
# THE FOLLOWING ROUTINE INCORPORATES RR RANGE AND LR ALT SCALE INFORMATION AND LEAVES DATA AT LO SCALE.
SCALADJ CCS L # L HAS SCALE INBIT FOR THIS RADAR.
TCF +2 # ON HIGH SCALE.
TCF DGCHECK2
2016-12-28 16:11:25 +00:00
CA DNINDEX
MASK BIT3
CCS A
TCF LRSCK
2016-12-28 16:11:25 +00:00
DXCH ITEMP3
DDOUBL
DDOUBL
DDOUBL
DXCH ITEMP3
2016-12-28 16:11:25 +00:00
TCF DGCHECK2
2016-12-28 16:11:25 +00:00
LRSCK CCS ITEMP3
TCF +11
CS ITEMP4
AD HISCALIM
EXTEND
BZMF +5
2016-12-28 16:11:25 +00:00
CS FLGWRD11
MASK SCABBIT
ADS FLGWRD11
TCF +4
2016-12-28 16:11:25 +00:00
CS SCABBIT
MASK FLGWRD11
TS FLGWRD11
EXTEND
DCA ITEMP3
DDOUBL
DDOUBL
TCF DASAMPL
2016-12-28 16:11:25 +00:00
HISCALIM DEC 460 # 2481.7 FT ******************************
# Page 560
DGCHECK TS ITEMP1 # UPDATE DATA GOOD BIT IN OLDATAGD AND
EXTEND # MAKE SURE IT WAS ON BEFORE AND AFTER THE
RAND CHAN33 # SAMPLE WAS TAKEN BEFORE RETURNING. IF
TS L # NOT, GOES TO RESAMPLE TO TRY AGAIN. IF
CS ITEMP1 # MAX NUMBER OF TRIES HAS BEEN REACHED,
MASK OLDATAGD # THE BIT CORRESPONDING TO THE DATA GOOD
AD L # WHICH FAILED TO APPEAR IS IN ITEMP1 AND
XCH OLDATAGD # CAN BE USED TO SET RADMODES WHICH VIA
MASK ITEMP1 # SETTRKF SETS THE TRACKER FAIL LAMP.
AD L
CCS A # SHOULD BOTH BE ZERO.
TC RESAMPLE
DXCH ITEMP3 # IF DATA GOOD BEFORE AND AFTER, ADD TO
DAS SAMPLSUM # ACCUMULATION.
TC Q
2016-12-28 16:11:25 +00:00
DATAFAIL CS ITEMP1 # IN THE ABOVE CASE, SET RADMODES BIT
MASK RADMODES # SHOWING SOME RADAR DATA FAILED.
AD ITEMP1
TS RADMODES
2016-12-28 16:11:25 +00:00
DXCH ITEMP3 # IF WE HAVE BEEN UNABLE TO GATHER N
DXCH SAMPLSUM # SAMPLES, USE LAST ONE ONLY.
TC RADLITES
TCF NOMORE
# Page 561
# THIS ROUTINE CHANGES THE LR POSITION, AND CHECKS THAT IT GOT THERE.
SETLOC P20S1
BANK
2016-12-28 16:11:25 +00:00
COUNT* $$/RSUB
LRPOS2 INHINT
CS RADMODES
MASK LRPOSBIT # SHOW DESIRED LR POSITION IS 2
ADS RADMODES
2016-12-28 16:11:25 +00:00
CAF BIT7
EXTEND
RAND CHAN33 # SEE IF ALREADY THERE.
EXTEND
BZF RADNOOP
2016-12-28 16:11:25 +00:00
CAF BIT13
EXTEND
WOR CHAN12 # COMMAND TO POSITION 2
CAF 6SECS # START SCANNING FOR INBIT AFTER 7 SECS.
TC WAITLIST
EBANK= LOSCOUNT
2CADR LRPOSCAN
2016-12-28 16:11:25 +00:00
TC ROADBACK
2016-12-28 16:11:25 +00:00
LRPOSNXT TS SAMPLIM
TC FIXDELAY # SCAN ONCE PER SECOND 15 TIMES MAX AFTER
DEC 100 # INITIAL DELAY OF 7 SECONDS.
2016-12-28 16:11:25 +00:00
CAF BIT7 # SEE IF LR POS2 IS ON
EXTEND
RAND CHAN33
EXTEND
BZF LASTLRDT # IF THERE, WAIT FINAL SECOND FOR BOUNCE.
2016-12-28 16:11:25 +00:00
CCS SAMPLIM # SEE IF MAX TIME UP.
TCF LRPOSNXT
2016-12-28 16:11:25 +00:00
CS BIT13 # IF TIME UP, DISABLE COMMAND AND ALARM.
EXTEND
WAND CHAN12
TCF RDBADEND
2016-12-28 16:11:25 +00:00
RADNOOP CAF ONE # NO FURTHER ACTION REQUESTED.
TC WAITLIST
EBANK= LOSCOUNT
2CADR RGOODEND
# Page 562
TC ROADBACK
LASTLRDT CA 2SECS # WAIT TWO SECONDS AFTER RECEIPT OF INBIT
TC VARDELAY # TO WAIT FOR ANTENNA BOUNCE TO DIE OUT.
2016-12-28 16:11:25 +00:00
CS BIT13 # REMOVE COMMAND
EXTEND
WAND CHAN12
TCF RGOODEND
2016-12-28 16:11:25 +00:00
LRPOSCAN CAF FOURTEEN # SET UP FOR 15 SAMPLES.
TCF LRPOSNXT
6SECS DEC 600
# Page 563
# SEQUENCES TO TERMINATE RR OPERATIONS.
ENDRADAR CAF RCDUFBIT # PROLOG TO CHECK RR CDU FAIL BEFORE END.
MASK RADMODES
CCS A
TCF RGOODEND
TCF RDBADEND
-2 CS ZERO # RGOODEND WHEN NOT UNDER WAITLIST CONTROL
TS RUPTAGN
2016-12-28 16:11:25 +00:00
RGOODEND CAF TWO
TC POSTJUMP
CADR GOODEND
2016-12-28 16:11:25 +00:00
-2 CS ZERO # RDBADEND WHEN NOT UNDER WIATLIST.
TS RUPTAGN
RDBADEND CAF TWO
TC POSTJUMP
CADR BADEND
2016-12-28 16:11:25 +00:00
BIN3 EQUALS THREE
# Page 564
# PROGRAM NAME: LPS20.1 VECTOR EXTRAPOLATION AND LOS COMPUTATION
# MOD. NO. 2 BY J.D. COYNE SDC DATE 12-7-66
#
# FUNCTIONAL DESCRPIPTION:
# 1) EXTRAPOLATE THE LEM AND CSM VECTORS IN ACCORDANCE WITH THE TIME REFERRED TO IN CALLER + 1.
# 2) COMPUTES THE LOS VECTOR TO THE CSM, CONVERTS IT TO STABLE MEMBER COORDINATES AND STORES IT IN RRTARGET.
# 3) COMPUTES THE MAGNITUDE OF TEH LOS VECTOR AND STORES IT IN MLOSV
#
# CALLING SEQUENCE: CALL
# LPS20.1
#
# SUBROUTINES CALLED:
# LEMPREC, CSMPREC
#
# NORMAL EXIT: RETURN TO CALLER + 2.
#
# ERROR EXITS: NONE
#
# ALARMS: NONE
#
# OUTPUT:
# LOS VECTOR (HALF UNIT) IN SM COORDINATES STORED IN RRTARGET
# MAGNITUDE OF TEH LOS VECTOR (METERS SCALED B-29) STORED IN MSLOV
# RRNBSW CLEARED.
#
# INITIALIZED ERASABLE
# TDEC1 MUST CONTAIN THE TIME FOR EXTRAPOLATION
# SEE ORBITAL INTEGRATION ROUTINE
#
# DEBRIS:
# MPAC DESTROYED BY THE ROUTINE
BANK 23
SETLOC P20S
BANK
# Page 565
COUNT* $$/LPS20
LPS20.1 STQ BOFF
LS21X
LOSCMFLG # LOSCMFLG = 0 MEANS NOT CALLED BY R21
LMINT # SO CALL LEMCONIC TO GET LM STATE
BON # IF IN R21 AND ON LUNAR SURFACE
SURFFLAG # DON'T CALL LEMCONIC
CSMINT
LMINT CALL
LEMCONIC # EXTRAPOLATE LEM
VLOAD
RATT
STOVL LMPOS # SAVE LM POSITION B-29
VATT
STODL LMVEL # SAVE LM VELOCITY B-7
TAT
CSMINT STCALL TDEC1
CSMCONIC # EXTRAPOLATE CSM
VLOAD VSU # COMPUTE RELATIVE VELOCITY V(CSM) - V(LM)
VATT
LMVEL
MXV VSL1
REFSMMAT
EXIT
TC KILLTASK # KILL THE TASK WHICH CALLS DODES SINCE
CADR DESLOOP +2 # STORING INTO ERASEABLES DODES USES
TC INTPRET
STOVL LOSVEL
RATT
VSU BOFF
LMPOS
RNDVZFLG
NOTSHIFT
BOVB
TCDANZIG
VSL
9D
NOTSHIFT UNIT BOVB # IF OVERFLOW, RANGE MUST BE GREATER
526ALARM # THAN 400 N. M.
MXV VSL1
REFSMMAT # CONVERT TO STABLE MEMBER
STODL RRTARGET
36D # SAVE MAGNITUDE OF LOS VECTOR FOR
STORE MLOSV # VELOCITY CORRECTION IN DESIGNATE
CLRGO
RRNBSW
LS21X
# Page 566
# PROGRAM NAME: LPS20.2 400 NM RANGE CHECK
# MOD. NO. 2 BY J.D. COYNE SDC DATE 12-7-66
#
# FUNCTIONAL DESCRIPTION:
# COMPARES THE MAGNITUDE OF THE LOS VECTOR TO 400 NM.
#
# CALLING SEQUENCE: CALL
# LPS20.2
#
# SUBROUTINES CALLED: NONE
#
# NORMAL EXIT: RETURN TO CALLER +1, MPAC EQ 0 (RANGE 400NM OR LESS.)
#
# ERROR EXITS: RETURN TO CALLER +1, MPAC EQ 1 (RANGE GREATER THAN 400NM)
#
# ALARMS: NONE
#
# OUTPUT: NONE
#
# INITIALIZED ERASEABLE:
# PDL 36D MUST CONTAIN THE MAGNITUDE OF THE VECTOR
#
# DEBRIS:
# MPAC DESTROYED BY THIS ROUTINE
SETLOC P20S1
BANK
COUNT* $$/LPS20
2016-12-28 16:11:25 +00:00
LPS20.2 DLOAD DSU
MLOSV # MAGNITUDE OF LOS
FHNM # OVER 400NM
BPL
TOFAR
SLOAD RVQ
ZERO/SP
TOFAR SLOAD RVQ
ONE/SP
ONE/SP DEC 1
# Page 567
FHNM 2DEC 740800 B-20 # 400 NAUTICAL MILES IN METERS B-20
# Page 568
# PROGRAM NAME: LRS22.1 (DATA READ SUBROUTINE 1)
# MOD. NO.: 1 BY: P. VOLANTE SDC DATE: 11-15-66
#
# FUNCTIONAL DESCRIPTION:
# 1) READS RENDEZVOUS RADAR RANGE AND RANGE-RATE, TRUNNION AND SHAFT ANGLES, THREE CDU VALUES AND TIME. CONVERTS THIS
# DATA AND LEAVES IT FOR THE MEASUREMENT INCORPORATION ROUTINE (LSR22.3). CHECKS FOR THE RR DATA GOOD DISCRETE, FOR
# RR REPOSITION AND RR CDU FAIL
# 2) COMPARES RADAR LOS WITH LOS COMPUTED FROM STATE VECTORS TO SEE IF THEY ARE WITHIN THREE DEGREES
#
# CALLING SEQUENCE: BANKCALL FOR LRS22.1
#
# SUBROUTINES CALLED:
# RRDOT LPS20.1
# RRRANGE BANKCALL
# RADSTALL CDULOGIC
# RRNB SMNB
#
# NORMAL EXIT: RETURN TO CALLER+1 WITH MPAC SET TO +0
#
# ERROR EXITS: RETURN TO CALLER+1 WITH ERROR CODE STORED IN MPAC AS FOLLOWS:
# 00001 -- ERROR EXIT 1 -- RR DATA NO GOOD (NO RR DATA GOOD DISCRETE OR RR CDU FAIL OR RR REPOSITION)
# 00002 -- ERROR EXIT 2 -- RR LOS NOT WITHIN THREE DEGREES OF LOS COMPUTED FROM STATE VECTORS
#
# ALARMS: 521 -- COULD NOT READ RADAR DATA (RR DATA GOOD DISCRETE NOT PRESENT BEFORE AND AFTER READING THE RADAR)
# (THIS ALARM IS ISSUED BY RADARREAD SUBROUTINE WHICH IS ENTERED FROM A RADARUPT)
#
# OUTPUT: RRLOSVEC -- THE RR LINE-OF-SIGHT VECTOR (USED BY LRS22.2) -- A HALF-UNIT VECTOR
# RM -- THE RR RANGE READING (TO THE CSM) DP, IN METERS SCALED BY B-29 (USED BY LRS22.2 AND LRS22.3)
#
# ALL OF THE FOLLOWING OUTPUTS ARE USED BY LRS22.3:
# RDOTM -- THE RR RANGE-RATE READING, DP, IN METERS PER CENTISECOND, SCALED BY B-7
# RRTRUN -- THE RR TRUNNION ANGLE, DP, IN REVOLUTIONS, SCALED B0
# RRSHAFT -- RR SHAFT ANGLE, DP, IN REVOLUTIONS, SCALED B0
# AIG,AMG,AOG -- THE CDU ANGLES, THREE SP WORDS
# MKTIME -- THE TIME OF THE RR READING, DP, IN CENTISECONDS
#
# ERASABLE INITIALIZATION REQUIRED:
# RNRAD, THE RADAR READ COUNTER FROM WHICH IS OBTAINED:
# Page 569
# 1) RR RANGE SCALED 9.38 FT. PER BIT ON THE LOW SCALE AND 75.04 FT. PER BIT ON THE HIGH SCALE
# 2) RR RANGE RATE, SCALED .6278 FT./SEC. PER BIT
# THE CDU ANGLES FROM CDUX, CDUY, CDUZ, AND TIME1 AND TIME2
#
# DEBRIS: LRS22.1X, A, L, Q, PUSHLIST
BANK 32
SETLOC LRS22
BANK
COUNT* $$/LRS22
2016-12-28 16:11:25 +00:00
LRS22.1 TC MAKECADR
TS LRS22.1X
TC DOWNFLAG
ADRES RNGSCFLG
INHINT
CAF BIT3
EXTEND # GET RR RANGE SCALE
RAND CHAN33 # FROM CHANNEL 33 BIT 3
TS L
CS RRRSBIT
MASK RADMODES
AD L
TS RADMODES
RELINT
READRDOT TC BANKCALL
CADR RRRDOT # READ RANGE-RATE (ONE SAMPLE)
TC BANKCALL
CADR RADSTALL # WAIT FOR DATA READ COMPLETION
TCF EREXIT1 # COULD NOT READ RADAR-ERROR EXIT 1
2016-12-28 16:11:25 +00:00
INHINT # NO INTERRUPTS WHILE READING TIME AND CDU
DXCH TIMEHOLD # SET MARK TIME EQUAL TO THE MID-POINT
DXCH MPAC +5 # TEMP BUFFER FOR DOWNLINK
DXCH SAMPLSUM # SAVE RANGE-RATE READING
DXCH RDOTMSAV
EXTEND
DCA CDUY # SAVE ICDU ANGLES
DXCH MPAC +3 # TEMP BUFFER FOR DOWNLINK
CA CDUX
TS MPAC +2 # TEMP BUFFER FOR DOWNLINK
EXTEND
DCA TIME2 # SAVE TIME
DXCH MPAC # SAVE TIME OF CDUY READINGS IN MPAC
EXTEND
DCA CDUT # SAVE TRUNNION AND SHAFT ANGLES FOR RRNB
DXCH TANG
# Page 570
RELINT
TC BANKCALL
CADR RRRANGE # READ RR RANGE (ONE SAMPLE)
TC BANKCALL
CADR RADSTALL # WAIT FOR READ COMPLETE
TC CHEXERR # CHECK FOR ERRORS DURING READ
INHINT # COPY CYCLE FOR MARK DATA ON DOWNLINK
DXCH DNRRANGE # RANGE, RANGE RATE (RAW DATA)
DXCH RANGRDOT
DXCH MPAC +5
DXCH MKTIME # MARK TIME
DXCH MPAC +3
DXCH AIG # CDUY, CDUZ
EXTEND
DCA TANG # PRESERVE TANG
DXCH TANGNB # TRUNNION AND SHAFT ANGLES
CA MPAC +2
TS AOG # CDUX
TC INTPRET
STODL 20D # SAVE TIME OF CDU READINGS IN 20D
RDOTMSAV # CONVERT RDOT UNITS AND SCALING
SL DMPR # START WITH READING SCALED B-28, -.6278
14D # FT./SECOND PER BIT
RDOTCONV # END WITH METERS/CENTISECOND, B-7
STORE RDOTM
SLOAD RTB
TANG # GET TRUNNION ANGLE
CDULOGIC # CONVERT TO DP ONES COMP. IN REVOLUTIOINS
STORE RRTRUN # AND SAVE FOR TMI ROUTINE (LSR22.3)
SLOAD RTB
TANG +1 # DITTO FOR SHAFT ANGLE
CDULOGIC
STODL RRSHAFT
SAMPLSUM
DMP SL2R # CONVERT UNITS AND SCALING DP RANGE
RANGCONV # PER BIT, END WITH METERS, SCALED -29
STCALL RM
RRNB # COMPUTE RADAR LOS USING RRNB
STODL RRBORSIT # AND SAVE
20D
STCALL TDEC1 # GET STATE VECTOR LOS AT TIME OF CDU READ
LPS20.1
EXIT
CA AIG # STORE IMU CDU ANGLES AT MARKTIME
TS CDUSPOT # IN CDUSPOT FOR TRG*SMNB
CA AMG
TS CDUSPOT +2
CA AOG
TS CDUSPOT +4
TC INTPRET
# Page 571
VLOAD CALL # LOAD VECTOR AND CALL TRANSFORMATION
RRTARGET
TRG*SMNB # ROTATE LOS AT MARKTIME FROM SM TO NB.
DOT # DOT WITH RADAR LOS TO GET ANGLE
RRBORSIT
SL1 ACOS # BETWEEN THEM
STORE DSPTEM1 # STORE FOR POSSIBLE DISPLAY
DSU BMN # IS IT LESS THAN 3 DEGREES
THREEDEG
NORMEXIT # YES -- NORMAL EXIT
EXIT # ERROR EXIT 2
CAF BIT2 # SET ERROR CODE
TS MPAC
TCF OUT22.1
2016-12-28 16:11:25 +00:00
NORMEXIT EXIT # NORMAL EXIT -- SET MPAC EQUAL ZERO
CAF ZERO
TS MPAC
OUT22.1 CAE LRS22.1X # EXIT FROM LRS22.1
TC BANKJUMP
CHEXERR CAE FLAGWRD5
MASK RNGSCBIT
CCS A # CHECK IF RANGE SCALE CHANGED
TCF READRDOT # YES -- TAKE ANOTHER READING
2016-12-28 16:11:25 +00:00
EREXIT1 CA BIT1 # SET ERROR CODE
TS MPAC
TC OUT22.1
THREEDEG 2DEC .008333333 # THREE DEGREES, SCALED REVS, B0
RRLOSVEC EQUALS RRTARGET
# Page 572
# PROGRAM NAME -- LRS22.2 (DATA READ SUBROUTINE 2)
# MOD. NO.: 1 BY: P. VOLANTE SDC DATE: 4-11-67
#
# FUNCTIONAL DESCRIPTION:
# (Yes, I know point #1 is missing. It is missing from the program listing -- RSB 2003)
# 2) CHECKS IF THE RR LOS (I.E., THE RADAR BORESIGHT VECTOR) IS WITHIN 30 DEGREES OF THE LM +Z AXIS
#
# CALLING SEQUENCE: BANKCALL FOR LRS22.2
#
# SUBROUTINES CALLED: G+N, AUTO, SETMAXDB
#
# NORMAL EXIT: RETURN TO CALLER WITH MPAC SET TO +0 (VIA SWRETURN)
#
# ERROR EXIT: RETURN TO CALLER WITH MPAC SET TO 00001 -- RADAR LOS NOT WITHIN 30 DEGREES OF LM +Z AXIS.
#
# ALARMS: NONE
#
# ERASABLE INITIALIZATION REQUIRED:
# RRLOSVEC -- THE RR LINE-OF-SIGHT VECTOR -- A HALF UNIT VECTOR COMPUTED BY LRS22.1
# RM -- RR RANGE, METERS B-29, FROM LRS22.1
# BIT 14 CHANNEL 31 -- INDICATES AUTOPILOT IS IN AUTO MODE
#
# DEBRIS -- A,L,Q,MPAC -- PUSHLIST AND PUSHLOC ARE NOT CHANGED BY THIS ROUTINE
SETLOC P20S
BANK
LRS22.2 TC MAKECADR
TS LRS22.1X
TC INTPRET
2016-12-28 16:11:25 +00:00
# CHECK IF RR LOS IS WITHIN 30 DEG OF
30DEGCHK DLOAD ACOS # THE SPACECRAFT +Z AXIT
RRBORSIT +4 # BY TAKING ARCCOS OF Z-COMP. OF THE RR
# LOS VECTOR, A HALF UNIT VECTOR
# IN NAV BASE AXES)
DSU BMN
30DEG
OKEXIT # NORMAL EXIT -- WITHIN 30 DEG.
EXIT # ERROR EXIT -- NOT WITHIN 30 DEG.
CAF BIT1 # SETS ERROR CODE IN MPAC
TS MPAC
TCF OUT22.2
OKEXIT EXIT # NORMAL EXIT -- SET MPAC = ZERO
# Page 573
CAF ZERO
TS MPAC
OUT22.2 CAE LRS22.1X
TC BANKJUMP
2016-12-28 16:11:25 +00:00
30DEG 2DEC .083333333 # THIRTY DEGREES, SCALED REVS, B0
# Page 574
# PROGRAM NAME -- LSR22.3 DATE -- 29 MAY 1967
# MOD. NO 3 LOG SECTION -- P20-P25
# MOD. BY -- DANFORTH ASSEMBLY LEMP20S REV 10
#
# FUNCTIONAL DESCRIPTION:
# THIS ROUTINE COMPUTES THE B-VECTORS ADN DELTA Q FOR EACH OF THE QUANTITIES MEASURED BY THE RENDEZVOUS
# RADAR. (RANGE, RANGE RATE, SHAFT AND TRUNNION ANGLES). THE ROUTINE CALLS THE INCORP1 AND INCORP2 ROUTINES
# WHICH COMPUTE THE DEVIATIONS AND CORRECT THE STATE VECTOR.
#
# CALLING SEQUENCE:
# THIS ROUTINE IS PART OF P20 RENDEZVOUS NAVIGATION FOR THE LM COMPUTER ONLY. THE ROUTINE IS ENTERED FROM
# R22 LEM ONLY AND RETURNS DIRECTLY TO R22LEM FOLLOWING SUCCESSFUL INCORPORATION OF MEASURED DATA. IF THE
# COMPUTED STATE VECTOR DEVATIONS EXCEED THE MAXIMUM PERMITTED. THE ROUTINE RETURNS TO R22LEM TO DISPLAY
# THE DEVIATIONS. IF THE ASTRONAUT ACCEPTS THE DATA R22LEM RETURNS TO LSR22.3 TO INCORPORATE THE
# DEVIATIONS INTO THE STATE VECTOR. IF THE ASTRONAUT REJECTS THE DEVIATIONS, NO MORE MEASUREMENTS ARE
# PROCESSED FOR THIS MARK, I.E., R22LEM GETS THE NEXT MARK.
#
# SUBROUTINES CALLED:
# WLINIT LGCUPDTE INTEGRV INCORP1 ARCTAN
# GETULC RADARANG INCORP2 NBSM INTSTALL
#
# OUTPUT:
# CORRECTED LM OR CSM STATE VECTOR (PERMANENT)
# NUMBER OF MARKS INCORPORATED IN MARKCTR
# MAGNITUDE OF POSITION DEVIATION (FOR DISPLAY) IN R22DISP METERS B-29
# MAGNITUDE OF VELOCITY DEVIATION (FOR DISPLAY) IN R22DISP +2 M/CSEC B-7
# UPDATED W-MATRIX
#
# ERASABLE INITIALIZATION REQUIRED:
# LM AND CSM STATE VECTORS
# W-MATRIX
# MARK TIME IN MKTIME
# RADAR RANGE IN RM METERS B-29
# RANGE RATE IN RDOTM METERS/CSES B-7
# SHAFT ANGLE IN RRSHAFT REVS. B0
# TRUNNION ANGLE IN RRTRUN REVS. B0
# GIMBAL ANGLES INNER IN AIG
# MIDDLE IN AMG
# OUTER IN ACG
# REFSMMAT
# RENDWFLG
# NOANGFLG
# VEHUPFLG
#
# DEBRIS:
# PUSHLIST -- ALL
# MX, MY, MZ (VECTORS)
# Page 575
# ULC, RXZ, SINTHETA, LGRET, RDRET, BVECTOR, W.IND, X78T
BANK 13
SETLOC P20S3
BANK
EBANK= LOSCOUNT
COUNT* $$/LSR22
LSR22.3 CALL
GRP2PC
BON SET
SURFFLAG # ARE WE ON LUNAR SURFACE
LSR22.4 # YES
DMENFLG
BOFF CALL
VEHUPFLG
DOLEM
INTSTALL
CLEAR CALL # LM PRECISION INTEGRATION
VINTFLAG
SETIFLGS
CALL
INTGRCAL
CALL
GRP2PC
2016-12-28 16:11:25 +00:00
CALL
INTSTALL
CLEAR BOFF
DIM0FLAG
RENDWFLG
NOTWCSM
SET SET # CSM WITH W-MATRIX INTEGRATION
DIM0FLAG
D6OR9FLG
NOTWCSM SET CLEAR
VINTFLAG
INTYPFLG
SET CALL
STATEFLG
INTGRCAL
GOTO
MARKTEST
DOLEM CALL
INTSTALL
SET CALL
VINTFLAG
SETIFLGS
2016-12-28 16:11:25 +00:00
CALL
INTGRCAL
# Page 576
2016-12-28 16:11:25 +00:00
CALL
GRP2PC
2016-12-28 16:11:25 +00:00
CALL
INTSTALL
CLEAR BOFF
DIM0FLAG
RENDWFLG
NOTWLEM
SET SET # LM WITH W-MATRIX INTEGRATION
DIM0FLAG
D6OR9FLG
NOTWLEM CLEAR CLEAR
INTYPFLG
VINTFLAG
SET CALL
STATEFLG
INTGRCAL
MARKTEST BON CALL # HAS W-MATRIX BEEN INVALIDATED
RENDWFLG # HAS W-MATRIX BEEN INVALIDATED
RANGEBQ
WLINIT # YES -- REINITIALIZE
RANGEBQ BON EXIT # DON'T CALL R65 IF ON SURFACE
SURFFLAG
RANGEBQ1
CA ZERO
TS R65CNTR
TC BANKCALL
CADR R65LEM
TC INTPRET
RANGEBQ1 AXT,2 BON # CLEAR X2
0
LMOONFLG # IS MOON SPHERE OF INFLUENCE
SETX2 # YES. STORE ZERO IN SCALSHFT REGISTER
INCR,2
2
SETX2 SXA,2 CALL
SCALSHFT # 0 -- MOON. 2 -- EARTH.
GRP2PC
AXT,1 SXA,1 # STORE RANGE CODE (1) FOR R3 IN NOUN 49
1
WHCHREAD
SLOAD SR # GET SINGLE PRECISION RVARMIN (B-12)
RVARMIN # SHIFT TO TRIPLE PRECISION (B-40)
28D
RTB
TPMODE # AND SAVE IN 20D
STORE 20D
CALL # BEGIN COMPUTING THE B-VECTORS, DELTAQ
GETULC # B-VECTORS FOR RANGE
BON VCOMP # B0, COMP. IF LM BEING CORRECTED
# Page 577
VEHUPFLG
+1
STOVL BVECTOR
ZEROVECS
STORE BVECTOR +6 # B1
STODL BVECTOR +12D # B2
36D
SRR* BDSU
2,2 # SHIFT FROM EARTH/MOON SPHERE TO B-29
RM # RM - (MAGNITUDE RCSM-RLM)
2016-12-28 16:11:25 +00:00
SLR*
2,2 # SHIFT TO EARTH/MOON SPHERE
STODL DELTAQ # EARTH B-29. MOON B-27
36D # RLC B-29/B-27
NORM DSQ # NORMALIZE AND SQUARE
X1
DMP SR*
RANGEVAR # MULTIPLY BY RANGEVAR (B12) THEN
0 -2,1 # UNNORMALIZE
SR* SR*
0,1
0,2
SR* RTB
0,2
TPMODE
STORE VARIANCE # B-40
DCOMP TAD
20D # B-40
BMN TLOAD
QOK
20D # B-40
STORE VARIANCE
QOK CALL
LGCUPDTE
2016-12-28 16:11:25 +00:00
SSP CALL
WHCHREAD
DEC 2 # STORE R-RATE CODE (2) FOR R3 IN NOUN 49
GRP2PC
CALL # B-VECTOR, DELTAQ FOR RANGE RATE
GETULC
PDDL SR* # GET RLC SCALED B-29/B-27
36D # AND SHIFT TO B-23
0 -4,2
STOVL 36D # THEN STORE BACK IN 36D
BON VCOMP # B1, COMP. IF LM BEING CORRECTED
VEHUPFLG
+1
2016-12-28 16:11:25 +00:00
VXSC
36D # B1 = RLC (B-24/B-22)
# Page 578
STOVL BVECTOR +6
NUVLEM
VSR* VAD
6,2 # SHIFT FOR EARTH/MOON SPHERE
VCVLEM # EARTH B-7. MOON B-5
PDVL VSR* # VL TO PD6
NUVCSM
6,2 # SHIFT FOR EARTH/MOON SPHERE
VAD VSU
VCVCSM
PDVL DOT # VC - VL = VLC TO PD6
0
2016-12-28 16:11:25 +00:00
6
PUSH SRR* # RDOT B-8/B-6 TO PD12
2,2 # SHIFT FROM EARTH/MOON SPHERE TO B-8
DSQ DMPR # RDOT**2 B-16 X RATEVAR B12
RATEVAR
STORE VARIANCE
SLOAD SR
VVARMIN # GET SINGLE PRECISION VVARMIN (B+12)
16D # SHIFT TO DP (B-4)
STORE 24D # AND SAVE IN 24D
DSU BMN # IS MIN. VARIANCE > COMPUTED VARIANCE
VARIANCE
VOK # BRANCH -- NO
DLOAD # YES -- USE MINIMUM VARIANCE
24D
STORE VARIANCE
VOK DLOAD SR2 # RDOT (PD12) FROM B-8/B-6
PDDL SLR* # TO B-10/B-8
RDOTM # SHIFT TO EARTH/MOON SPHERE
0 -1,2 # B-7 TO B-10/B-8
DSU
DMPR
36D
STOVL DELTAQ # B-33
0 # NOW GET B0
VXV VXV # (ULC X VLC) X ULC
BON VCOMP # B0, COMP. IF LM BEING CORRECTED
VEHUPFLG
+1
VSR*
0 -2,2 # SCALED B-5
STOVL BVECTOR
ZEROVECS
STORE 20D # ZERO OUT 20 TO 25 IN PUSHLIST
STOVL BVECTOR +12D
BVECTOR
ABVAL NORM # LOAD B0, GET MAGNITUDE AND NORMALIZE
20D # SHIFT COUNT IN 20D
# Page 579
VLOAD ABVAL
BVECTOR +6D # LOAD B1, GET MAGNITUDE AND NORMALIZE
NORM DLOAD
22D # SHIFT COUNT IN 22D
22D # FIND WHICH SHIFT IS SMALLER
DSU BMN # BRANCH -- B0 HAS A SMALLER SHIFT COUNT
20D
VOK1
LXA,1 GOTO
22D # LOAD X2 WITH THE SMALLER SHIFT COUNT
VOK2
VOK1 LXA,1
20D
VOK2 VLOAD VSL* # THEN ADJUST B0, B1, DELTAQ AND VARIANCE
BVECTOR # WITH THI SSHIFT COUNT
0,1
STOVL BVECTOR
BVECTOR +6
VSL*
0,1
STODL BVECTOR +6
DELTAQ
SL*
0,1
STORE DELTAQ
DLOAD SL* # GET RLC AND ADJUST FOR SCALE SHIFT
36D
0 -1,1
DSQ DMP # MULTIPLY RLC**2 BY VARIANCE
VARIANCE
SL4 RTB # SHIFT TO CONFORM TO BVECTORS AND DELTAQ
TPMODE
STCALL VARIANCE # AND STORE TP VARIANCE
LGCUPDTE
2016-12-28 16:11:25 +00:00
CALL
GRP2PC
BON EXIT # ARE ANGLES TO BE DONE
SURFFLAG
RENDEND # NO
EBANK= AIG
MXMYMZ CAF AIGBANK
TS BBANK
CA AIG # YES, COMPUTE MX, MY, MZ
TS CDUSPOT
CA AMG
TS CDUSPOT +2
CA AOG
TS CDUSPOT +4 # GIMBAL ANGLES NOW IN CDUSPOT FOR TRG*NBSM
TC INTPRET
# Page 580
VLOAD CALL
UNITX
TRG*NBSM
VXM VSL1
REFSMMAT
STOVL MX
UNITY
CALL
*NBSM*
VXM VSL1
REFSMMAT
STOVL MY
UNITZ
CALL
*NBSM*
VXM VSL1
REFSMMAT
SHAFTBQ STCALL MZ
RADARANG
SSP CALL # STORE SHAFT CODE (3) FOR R3 IN NOUN 49
WHCHREAD
DEC 3
GRP2PC
VLOAD DOT # COMPUTE DELTAQ,B VECTORS FOR SHAFT ANG.
ULC
MX
SL1
STOVL SINTH # 18D
ULC
DOT SL1
MZ
STCALL COSTH # 16D
ARCTAN
BDSU DMP
RRSHAFT
2PI/8
SL3R PUSH
DLOAD SL3
X789
SRR* BDSU # SHIFT FROM -5/-3 TO B0
0,2
DMP SRR*
RXZ
0,1 # SHIFT TO EARTH/MOON SPHERE
STOVL DELTAQ # EARTH B-29. MOON B-27
ULC
VXV VSL1
MY
UNIT
BOFF VCOMP # B0, COMP. IF CSM BEING CORRECTED
# Page 581
VEHUPFLG
+1
STOVL BVECTOR
ZEROVECS
STORE BVECTOR +6
STODL BVECTOR +12D
RXZ
SR* SRR* # SHIFT FROM EARTH/MOON SPHERE TO B-25
0 -2,1
0,2
STORE BVECTOR +12D
SLOAD
SHAFTVAR
DAD DMP
IMUVAR # RAD**2 B12
RXZ
SRR* DMP
0,1 # SHIFT TO EARTH/MOON SPHERE
RXZ
SR* SR*
0 -2,1
0,2
SR* RTB
0,2
TPMODE # STORE VARIANCE TRIPLE PRECISION
STCALL VARIANCE # B-40
LGCUPDTE
2016-12-28 16:11:25 +00:00
CALL
GRP2PC
TRUNBQ CALL
RADARANG
SSP CALL # STORE TRUNNION CODE (4) FOR R3 IN N49
WHCHREAD
DEC 4
GRP2PC
VLOAD VXV
ULC
MY
VSL1 VXV
ULC
VSL1 # (ULC X MY) X ULC
BOFF VCOMP # B0, COMP. IF CSM BEING CORRECTED
VEHUPFLG
+1
STOVL BVECTOR
ZEROVECS
STORE BVECTOR +6
STODL BVECTOR +12D
RXZ
# Page 582
SR* SRR* # SHIFT FROM EARTH/MOON SPHERE TO B-25
0 -2,1
0,2
STORE BVECTOR +14D
SLOAD
TRUNVAR
DAD DMP
IMUVAR
RXZ
SRR* DMP
0,1 # SHIFT TO EARTH/MOON SPHERE
RXZ
SR* SR*
0 -2,1
0,2
SR* RTB
0,2
TPMODE # STORE VARIANCE TRIPLE PRECISION
STODL VARIANCE
SINTHETA
ASIN BDSU # SIN THETA IN PD6
RRTRUN
DMP SL3R
2PI/8
PDDL SL3
X789 +2
SRR* BDSU # SHIFT FROM -5/-3 TO B0
0,2
DMP SRR*
RXZ
0,1
STCALL DELTAQ # EARTH B-29. MOON B-27
LGCUPDTE
2016-12-28 16:11:25 +00:00
CALL
GRP2PC
2016-12-28 16:11:25 +00:00
RENDEND GOTO
R22LEM93
2016-12-28 16:11:25 +00:00
# FUNCTIONAL DESCRIPTION:
# LSR22.4 IS THE ENTRY TO PERFORM LUNAR SURFACE NAVIGATION FOR THE LM
# COMPUTER ONLY. THIS ROUTINE COMPUTES THE BE-VECTORS AND DELTA Q FOR RANGE
# AND RANGE RATE MEASURED BY THE RENDEZVOUS RADAR
#
# SUBROUTINES CALLED:
# INTSTALL LGCUPDTE INCORP1 RP-TO-R
# INTEGRV GETULC INCORP2
#
# OUTPUT
# CORRECTED CSM STATE VECTOR (PERMANENT)
# NUMBER OF MARKS INCORPORATED IN MARKCTR
# Page 583
# MAGNITUDE OF POSITION DEVIATION (FOR DISPLAY) IN R22 DISP METERS B-29
# MAGNITUDE OF VELOCITY DEVIATION (FOR DISPLAY) IN R22DISP +2 M/CSEC B-7
# UPDATED W-MATRIX
# ERASABLE INITIALIZATION REQUIRED
# LM AND CSM STATE VECTORS
# W-MATRIX
# MARK TIME IN MKTIME
# RADAR RANGE IN RM METERS B-29
# RANGE RATE IN RDOTM METERS/CSEC B-7
# VEHUPFLG
LSR22.4 CALL
INTSTALL
SET CLEAR
STATEFLG
VINTFLAG # CALL TO GET LM POS + VEL IN REF COORD.
CALL
INTGRCAL
CALL
GRP2PC
CLEAR CALL
DMENFLG # SET MATRIX SIZE TO 6X6 FOR INCORP
INTSTALL
DLOAD BHIZ # IS THIS FIRST TIME THROUGH
MARKCTR
INITWMX6 # YES, INITIALIZE 6X6 W-MATRIX
CLEAR SET
D6OR9FLG
DIM0FLAG
SET CLEAR
VINTFLAG
INTYPFLG
CALL
INTGRCAL
GOTO
RANGEBQ
2016-12-28 16:11:25 +00:00
INITWMX6 CALL
WLINIT # INITIALIZE W-MATRIX
SET CALL
VINTFLAG
SETIFLGS
CALL
2016-12-28 16:11:25 +00:00
INTGRCAL
GOTO
RANGEBQ
2016-12-28 16:11:25 +00:00
# THIS ROUTINE CLEARS RFINAL (DP) AND CALLS INTEGRV
2016-12-28 16:11:25 +00:00
# Page 584
INTGRCAL STQ DLOAD
IGRET
MKTIME
STCALL TDEC1
INTEGRV
GOTO
IGRET
2016-12-28 16:11:25 +00:00
# THIS ROUTINE INITIALIZES THE W-MATRIX BY ZEROING ALL W THEN SETTING
# DIAGONAL ELEMENTS TO INITIAL STORED VALUES.
EBANK= W
WLINIT EXIT
CAF WBANK
TS BBANK
CAF WSIZE
TS W.IND
CAF ZERO
2016-12-28 16:11:25 +00:00
INDEX W.IND
TS W
CCS W.IND
TC -5
CAF AIGBANK # RESTORE EBANK 7
TS BBANK
TC INTPRET
2016-12-28 16:11:25 +00:00
BON SLOAD # IF ON LUNAR SURFACE, INITIALIZE WITH
SURFFLAG # WSURFPOS AND WSURFVEL INSTEAD OF
WLSRFPOS # WRENDPOS AND WRENDVEL
WRENDPOS
2016-12-28 16:11:25 +00:00
GOTO
WPOSTORE
WLSRFPOS SLOAD
WSURFPOS
WPOSTORE SR # SHIFT TO B-19 SCALE
5
STORE W
STORE W +8D
STORE W +16D
BON SLOAD
SURFFLAG
WLSRFVEL
WRENDVEL
GOTO
WVELSTOR
WLSRFVEL SLOAD
WSURFVEL
WVELSTOR STORE W +72D
STORE W +80D
STORE W +88D
SLOAD
# Page 585
WSHAFT
STORE W +144D
SLOAD
WTRUN
STORE W +152D
SET SSP # SET RENDWFLG -- W-MATRIX VALID
RENDWFLG
MARKCTR # SET MARK COUNTER EQUAL ZERO
0
RVQ
2016-12-28 16:11:25 +00:00
EBANK= W
WBANK BBCON WLINIT
EBANK= AIG
AIGBANK BBCON LSR22.3
# GETULC
#
# THIS SUBROUTINE COMPUTES THE RELATIVE POSITION VECTOR BETWEEN THE CSM
# AND THE LM, LEAVING THE UNIT VECTOR IN THE PUSHLIST AND MPAC AND THE
# MAGNITUDE IN 36D.
GETULC SETPD VLOAD
0
DELTALEM
2016-12-28 16:11:25 +00:00
LXA,2
SCALSHFT # LOAD X2 WITH SCALE SHIFT
VSR* VAD
9D,2 # SHIFT FOR EARTH/MOON SPHERE
RCVLEM
PDVL VSR*
DELTACSM
9D,2 # SHIFT FOR EARTH/MOON SPHERE
VAD VSU
RCVCSM
RTB PUSH # USE NORMUNIT TO PRESERVE ACCURACY
NORMUNX1
STODL ULC
36D
SL* # ADJUST MAGNITUDE FROM NORMUNIT
0,1
STOVL 36D # ULC IN PD0 AND MPAC,RLC IN 36D
ULC
RVQ
2016-12-28 16:11:25 +00:00
# RADARANG
#
# THIS SUBROUTINE COMPUTS SINTHETA = -ULC DOT MY
# RXZ = (SQRT (1-SINTHETA**2))RLC
# OUTPUT
# ULC IN ULC, PD0
# Page 586
# RLC IN PD36D
# SIN THETA IN SINTHETA AND PD6
# RXZ NORM IN RXZ (N IN X1)
RADARANG STQ CALL
RDRET
GETULC
VCOMP DOT
MY
SL1R PUSH # SIN THETA TO PD6
STORE SINTHETA
DSQ BDSU
DP1/4TH # 1-(SIN THETA)**2
SQRT DMP
36D
SL1 NORM
X1 # SET SHIFT COUNTER IN X1
STORE RXZ
GOTO # EXIT
RDRET
LGCUPDTE STQ CALL
LGRET
INCORP1
VLOAD ABVAL
DELTAX +6
LXA,2 SRR*
SCALSHFT # 0 -- MOON. 2 -- EARTH
2,2 # SET VEL DISPLAY TO B-7
STOVL R22DISP +2
DELTAX
ABVAL SRR*
2,2 # SET POS DISPLAY TO B-29
STORE R22DISP
SLOAD SR
RMAX
10D
DSU BMN
R22DISP
R22LEM96 # GO DISPLAY
SLOAD DSU
VMAX
R22DISP +2 # VMAX MINUS VEL. DEVIATION
BMN
R22LEM96 # GO DISPLAY
ASTOK CALL
INCORP2
GOTO
LGRET
IMUVAR 2DEC E-6 B12 # RAD**2
WSIZE DEC 161
# Page 587
2PI/8 2DEC 3.141592653 B-2
EBANK= LOSCOUNT
# Page 588
# PROGRAM NAME LRS24.1 RR SEARCH ROUTINE
# MCD NO. 0 BY P. VOLANTE, SDC DATE 1-15-67
#
# FUNCTIONAL DESCRIPTION
#
# DRIVES THE RENDEZVOUS RADAR IN A HEXAGONAL SEARCH PATTERN ABOUT THE LOS TO THE CSM (COMPUTED FROM THE CSM AND LM
# STATE VECTORS) CHECKING FOR THE DATA GOOD DISCRETE AND MONITORING THE ANGLE BETWEEN THE RADAR BORESIGHT AND THE
# LM +Z AXIS. IF THIS ANGLE EXCEEDS 30 DEGREES THE PREFERRED TRACKING ATTITUDE ROUTINE IS CALLED TO PERFORM AN
# ATTITUDE MANEUVER.
#
# CALLING SEQUENCE -- BANKCALL FOR LRS24.1
#
# SUBROUTINES CALLED
#
# LEMCONIC R61LEM
# CSMCONIC RRDESSM
# JOBDELAY FLAGDOWN
# WAITLIST FLAGUP
# RRNB BANKCALL
#
# EXIT -- TO ENDOFJOB WHEN THE SEARCH FLAG (SRCHOPT) IS NOT SET
#
# OUTPUT
#
# DATAGOOD (SP) -- FOR DISPLAY IN R1 -- 00000 INDICATES NO LOCKON
# 11111 INDICATES LOCKON ACHIEVED
# OMEGAD (SP) -- FOR DISPLAY IN R2 -- ANGLE BETWEEN RR BORESIGNT VECTOR AND THE SPACECRAFT +Z AXIS
#
# ERASABLE INITIALIZATION REQUIRED:
#
# SEARCH FLAG MUST BE SET
# LM AND CSM STATE VECTORS AND REFSMMAT MATRIX
#
# DEBRIS
#
# RLMSRCH UXVECT
# VXRLM UYVECT
# LOSDESRD NSRCHPNT
# DATAGOOD OMEGAD
# MPAC PUSHLIST
COUNT* $$/LRS24
LRS24.1 CAF ZERO
TS NSRCHPNT # SET SEARCH PATTERN POINT COUNTER TO ZERO
CHKSRCH CAF BIT14 # ISSUE AUTO TRACK ENABLE TO RADAR
EXTEND
# Page 589
WOR CHAN12
CAF SRCHOBIT # CHECK IF SEARCH STILL REQUESTED
MASK FLAGWRD2 # (SRCHOPT FLAG SET)
EXTEND
BZF ENDOFJOB # NO-TERMINATE JOB
2016-12-28 16:11:25 +00:00
CAF 6SECONDS # SCHEDULE TASK TO DRIVE RADAR TO NEXT PT.
INHINT
TC WAITLIST # IN 6 SECONDS
EBANK= LOSCOUNT
2CADR CALLDGCH
2016-12-28 16:11:25 +00:00
RELINT
CS RADMODES # IS REMODE IN PROGRESS
MASK REMODBIT
EXTEND
BZF ENDOFJOB # YES -- WAIT SIX SECONDS
TC INTPRET
2016-12-28 16:11:25 +00:00
RTB DAD # COMPUTE LOS AT PRESENT TIME + 1.5 SEC.
LOADTIME
1.5SECS
LRS24.11 STCALL TDEC1
LEMCONIC # EXTRAPOLATE LM STATE VECTOR
VLOAD
RATT
STOVL RLMSRCH # SAVE LEM POSITION
VATT
STODL SAVLEMV # SAVE LEM VELOCITY
TAT
STCALL TDEC1 # EXTRAPOLATE CSM STATE VECTOR
CSMCONIC # EXTRAPOLATE CSM STATE VECTOR
VLOAD VSU # LOS VECTOR = R(CSM) - R(LM)
RATT
RLMSRCH
UNIT
STOVL LOSDESRD # STORE DESIRED LOS
VATT # COMPUTE UNIT(V(CM) CROSS R(CM))
UNIT VXV
RATT
UNIT
STORE VXRCM
VLOAD VSU
VATT
SAVLEMV
MXV VSL1 # CONVERT FROM REFERENCE TO STABLE MEMBER
REFSMMAT
STORE SAVLEMV # VLC = V(CSM) - V(LM)
SLOAD BZE # CHECK IF N=0
# Page 590
NSRCHPNT
DESGLOS # YES -- DESIGNATE ALONG LOS
DSU BZE # IS N=1
ONEOCT # YES -- CALCULATE X AND Y AXES OF
CALCXY # SEARCH PATTERN COORDINATE SYSTEM
VLOAD # NO -- ROTATE X-Y AXES TO NEXT SEARCH POINT
UXVECT
STOVL UXVECTPR # SAVE ORIGINAL X AND Y VECTORS
UYVECT # UXPRIME = ORIGINAL UX
STORE UYVECTPR # UYPRIME = ORIGINAL UY
VXSC
SIN60DEG # UX = (COS 60)UXPR + (SIN 60)UYPR
STOVL UXVECT
UXVECTPR
VXSC VAD
COS60DEG
UXVECT
UNIT
STOVL UXVECT
UXVECTPR # UY = (-SIN 60)UXPR + (COS 60)UYPR
VXSC
SIN60DEG
STOVL UYVECT
UYVECTPR
VXSC VSU
COS60DEG
UYVECT
UNIT
STORE UYVECT
OFFCALC VXSC VAD # OFFSET VECTOR = K(UY)
OFFSTFAC # LOS VECTOR + OFFSET VECTOR DEFINES
LOSDESRD # DESIRED POINT IN SEARCH PATTERN
UNIT MXV
REFSMMAT # CONVERT TO STABLE MEMBER COORDINATES
VSL1
CONTDESG STOVL RRTARGET
SAVLEMV
STORE LOSVEL
EXIT
INHINT
TC KILLTASK # KILL ANY PRESENTLY WAITLISTED TASK
CADR DESLOOP +2 # WHICH WOULD DESIGNATE TO THE LAST
# POINT IN THE PATTERN
CONTDES2 CS CDESBIT
MASK RADMODES # SET BIT 15 OF RADMODES TO INDICATE
AD CDESBIT # A CONTINUOUS DESIGNATE WANTED.
TS RADMODES
TC INTPRET
2016-12-28 16:11:25 +00:00
CALL
# Page 591
RRDESSM # DESIGNATE RADAR TO RRTARGET VECTOR
2016-12-28 16:11:25 +00:00
EXIT
TC LIMALARM # LOS NOT IN MODE 2 COVERAGE (P22)
TC LIMALARM # VEHICLE MANEUVER REQUIRED (P20)
2016-12-28 16:11:25 +00:00
# COMPUTE OMEGA,ANGLE BETWEEN RR LOS AND
# SPACECRAFT +Z AXIS
OMEGCALC EXTEND
DCA CDUT
DXCH TANGNB
TC INTPRET
CALL
RRNB
DLOAD ACOS # OMEGA IS ARCCOSINE OF Z-COMPONENT OF
36D # VECTOR COMPUTED BY RRNB (LEFT AT 32D)
STORE OMEGDISP # STORE FOR DISPLAY IN R2
EXIT
TC ENDOFJOB
# Page 592
# CALCULATE X AND Y VECTORS FOR SEARCH PATTERN COORDINATE SYSTEM.
CALCXY VLOAD VXV
VXRCM
LOSDESRD
UNIT
STOVL UXVECT # UX = (VLM X RLM) X LOS
LOSDESRD
VXV UNIT
UXVECT
STORE UYVECT # UY = LOS X UX
2016-12-28 16:11:25 +00:00
GOTO
OFFCALC
2016-12-28 16:11:25 +00:00
DESGLOS VLOAD MXV # WHEN N= 0,DESIGNATE ALONG LOS
LOSDESRD
REFSMMAT # CONVERT LOS FROM REFERENCE TO SM COORDS
VSL1 GOTO
CONTDESG
2016-12-28 16:11:25 +00:00
CALLDGCH CAE FLAGWRD0 # IS RENDEZVOUS FLAG SET
MASK RNDVZBIT
EXTEND
BZF TASKOVER # NO -- EXIT R24
CAF PRIO25 # YES -- SCHEDULE JOB TO DRIVE RADAR TO NEXT
TC FINDVAC # PONT IN SEARCH PATTERN
EBANK= RLMSRCH
2CADR DATGDCHK
2016-12-28 16:11:25 +00:00
TC TASKOVER
2016-12-28 16:11:25 +00:00
DATGDCHK CAF BIT4
EXTEND # CHECK IF DATA GOOD DISCRETE PRESENT
RAND CHAN33
EXTEND
BZF STORE1S # YES -- GO TO STORE 11111 FOR DISPLAY IN R1
CS SIX
AD NSRCHPNT # IS N GREATER THAN 6
EXTEND
BZF LRS24.1 # YES -- RESET N = 0 AND START AROUND AGAIN
INCR NSRCHPNT # NO -- SET N = N+1 AND GO TO
TCF CHKSRCH # NEXT POINT IN PATTERN
2016-12-28 16:11:25 +00:00
STORE1S CAF ALL1S # STORE 11111 FOR DISPLAY IN R1
TS DATAGOOD
# Page 593
INHINT
TC KILLTASK # DELETE DESIGNATE TASK FROM
CADR DESLOOP +2 # WAITLIST USING KILLTASK
TC ENDOFJOB
2016-12-28 16:11:25 +00:00
LIMALARM TC ALARM # ISSUE ALARM 527 -- LOS NOT IN MODE2
OCT 527 # COVERAGE IN P22 OR VEHICLE MANEUVER
INHINT # REQUIRED IN P20
TC KILLTASK # KILL WAITLIST CALL FOR NEXT
CADR CALLDGCH # POINT IN SEARCH PATTERN
TC ENDOFJOB
2016-12-28 16:11:25 +00:00
ALL1S DEC 11111
SIN60DEG 2DEC .86603
COS60DEG = DPHALF # (2DEC .50)
UXVECTPR EQUALS 12D # PREVIOUS
UYVECTPR EQUALS 18D
RLMUNIT EQUALS 12D
OFFSTFAC 2DEC 0.05678 # TANGENT OF 3.25 DEGREES
ONEOCT OCT 00001 # **** NOTE -- THESE TWO CONSTANTS MUST ****
3SECONDS 2DEC 300 # **** BE IN THIS ORDER BECAUSE ****
# **** ONEOCT NEEDS A LOWER ORDER ****
# **** WORD OF ZEROES ****
6SECONDS DEC 600
1.5SECS 2DEC 150
ZERO/SP EQUALS HI6ZEROS
2016-12-28 16:11:25 +00:00
BLOCK 02
SETLOC FFTAG5
BANK
COUNT* $$/P20
GOTOV56 EXTEND # P20 TERMINATES BY GOTOV56 INSTEAD OF
DCA VB56CADR # GOTOP00H
TCF SUPDXCHZ
EBANK= WHOCARES
VB56CADR 2CADR TRMTRACK
# Page 594
# PROGRAM NAME: R29 (RENDEZVOUS RADAR DESIGNATE DURING POWERED FLIGHT)
# MOD NO. 2 BY H. BLAIR-SMITH JULY 2, 1968
#
# FUNCTIONAL DESCRIPTION:
#
# DESIGNATES THE RENDEZVOUS RADAR TOWARD THE COMPUTES LOS TO THE CSM, WITH THE CHIEF OBJECTIVE OF OBTAINING RANGE
# AND RANGE RATE DATA AT 2-SECOND INTERVALS FOR TRANSMISSION TO THE GROUND. WHEN THE RR IS WITHIN .5 DEGREE OF
# THE COMPUTED LOS, TRACKING IS ENABLED, AND DESIGNATION CONTINUES UNTIL THE DATA-GOOD DISCRETE IS RECEIVED. AT
# THAT POINT, DESIGNATION CEASES AND A RADAR-READING ROUTINE TAKES OVER, PREPARING A CONSISTENT SET OF DATA FOR
# DOWN TELEMETRY. THE SET INCLUDES RANGE, RANGE RATE, MARK TIME, TWO RR CDU ANGLES, THREE IMUCDU ANGLES, AND AN
# INDICATOR WHICH IS 1 WHEN THE SET IS CONSISTENT AND 0 OTHERWISE. THE INDICATOR IS IN TRKMKCNT.
#
# CALLING SEQUENCE: BEGUN EVERY 2 SECONDS AS AN INTEGRAL PART OF SERVICER
#
# SUBROUTINES CALLED:
#
# REMODE RRPONLY
# UNIT MPACVBUF
# QUICTRIG AX*SR*T
# SPSIN SPCOS
# SETRRECR RROUT
# RRRDOT RRRANGE
#
# EXIT: TO NOR29NOW, IN SERVICER.
#
# OUTPUT: (ALL FOR DOWNLINK)
#
# RM RDOTM (RAW)
2016-12-28 16:11:25 +00:00
# AIG AMG
# AOG TRKMKCNT TRKMKCNT = 00001 IF SET IS CONSISTENT,
# TANGNB TANGNB +1 OTHERWISE TRKMKCNT = 00000.
# MKTIME
# Page 595
#
# ERASABLE INITIALIZATION REQUIRED:
#
# NOR29FLG READRFLG (TO 1 AND 0 BY FRESH START) (RESET NOR29FLG TO LET SERVICER RUN R29)
# PIPTIME RADMODES (BIT 10) (BIT SET TO 0 BY FRESH START)
# R(CSM) V(CSM)
# R V (PIPTIME THRU V BY AVE G IN SERVICER)
#
# DEBRIS:
#
# RADMODES (BIT 10)
# LOSSM LOSVDT/4 (= RRTARGET & LOSVEL)
# SAVECDUT OLDESFLG (SAVECDUT = MLOSV)
# LOSCMFLG READRFLG
#
# ALARMS: NONE.
#
# COMPONENT JOBS AND TASKS:
#
# INITIALIZING, IF RR IS FOUND TO BE IN MODE 1: JOB R29REMOJ AND TASK REMODE: ALWAYS: TASK PREPOS29.
# DESIGNATING: TASK BEGDES29 & JOB R29DODES.
# RADAR READING: TASK R29READ AND JOB R29RDJOB. ALL JOBS ARE NOVAC TYPE.
BANK 33
SETLOC R29/SERV
BANK
2016-12-28 16:11:25 +00:00
COUNT* $$/r29
2016-12-28 16:11:25 +00:00
NR29&RDR EQUALS EBANK5
# Page 596
# SERVICER COMES TO R29 FROM "R29?" IF NOR29FLG, READRFLG, RRREMODE, RRCDUZRO, RRREPOS, AND DISPLAY-INERTIAL-DATA
# ARE ALL RESET, AND THE RR IS IN LGC MODE (OFTEN CONFUSINGLY CALLED AUTO MODE).
R29 CS RADMODES
MASK DESIGBIT
EXTEND
BZF R29.LOS # BRANCH IF DESIGNATION IS ALREADY ON.
2016-12-28 16:11:25 +00:00
INHINT
ADS RADMODES # SHOW THAT DESIGNATION IS NOW ON.
CS BIT14
EXTEND
WAND CHAN12 # REMOVE RR TRACK ENABLE DISCRETE.
CS LOSCMBIT
MASK FLAGWRD2
TS FLAGWRD2 # CLEAR LOSCMFLG TO SHOW DES. LOOP IS OFF.
CS OLDESBIT
MASK STATE
TS STATE # SHOW THAT DES. LOOP IS NOT REQUESTED.
TC BANKCALL
CADR SETRRECR # ENABLE RR ERROR COUNTERS.
CA ANTENBIT
MASK RADMODES
CCS A # TEST RR MODE BIT.
TCF SETPRPOS # MODE 2.
2016-12-28 16:11:25 +00:00
CA PRIO21 # MODE 1: MUST REMODE.
TC NOVAC
EBANK= LOSCOUNT
2CADR R29REM0J # NEEDS OWN JOB TO RADSTALL IN.
2016-12-28 16:11:25 +00:00
CS DESIGBIT
MASK RADMODES # CLEAR DESIGNATE FLAG IN RADMODES
TS RADMODES # BEFORE CALLING REMODE
CA REMODBIT
ADS RADMODES # SHOW THAT REMODING IS ON.
TCF NOR29NOW # CONTINUE SERVICER FUNCTIONS.
2016-12-28 16:11:25 +00:00
SETPRPOS CA ONE
TC WAITLIST
EBANK= LOSCOUNT
2CADR PREPOS29 # TASK TO SET TRUNNION ANGLE TO 180 DEG.
2016-12-28 16:11:25 +00:00
CA REPOSBIT
ADS RADMODES # SHOW THAT REPOSITIONING IS ON.
TCF NOR29NOW
# Page 597
# FORCE RENDEZVOUS RADAR INTO MODE 2.
R29REM0J CA ONE
TC WAITLIST
EBANK= LOSCOUNT
2CADR REMODE # REMODE MUST RUN AS A TASK.
2016-12-28 16:11:25 +00:00
TC BANKCALL # WAIT FOR END OF REMODING
CADR RADSTALL
2016-12-28 16:11:25 +00:00
TCF ENDOFJOB # BAD EXIT CAN'T HAPPEN.
TCF ENDOFJOB
2016-12-28 16:11:25 +00:00
# TASK TO PREPOSITION THE RR TRUNNION ANGLE TO -180 DEG.
SETLOC R29S1
BANK
2016-12-28 16:11:25 +00:00
PREPOS29 CA NEGMAX # -180 DEG.
TC RRTONLY # DRIVE TRUNNION CDU.
CS REPOSBIT # SHOW THAT REPOSITIONING IS OFF.
MASK RADMODES
TS RADMODES
TCF TASKOVER
2016-12-28 16:11:25 +00:00
# COMPUTE THE LINE-OF-SIGHT AND LOS VELOCITY, AND PASS THEM TO THE R29DODES LOOP.
SETLOC R29
BANK
2016-12-28 16:11:25 +00:00
R29.LOS EXTEND
DCS PIPTIME
DXCH MPAC
EXTEND
DCA TIME2
DAS MPAC # (MPAC) = T-PIPTIME, SCALED B-28.
TS MODE # SET MODE TO DOUBLE PRECISION.
CA MPAC +1
EXTEND
MP BIT12
DXCH MPAC # T-PIPTIME NOW SCALED B-17.
TC INTPRET
# Page 598
# LOSCMFLG = 0 MEANS THAT THE DESIGNATION IS READY FOR NEW DATA. SETTING LOSCMFLG MAKES IT GO AWAY SO SETUP29D CAN
# START IT UP WHEN THE DATA IS IN PLACE.
PDVL VSU # PUSH DOWN T-PIPTIME
V(CSM)
V # LOSVEL = V(CSM) - V
PDDL VXSC # SWAP LOSVEL FOR T-PIPTIME, MULTIPLY THEM
VAD VSU # AND ADD THE RESULT TO R(CSM) - R TO GET
R(CSM) # AN UP-TO-DATE LOS VECTOR IN SM AXES.
R
BOFSET EXIT # (BOFSET DOES ITS THING INHINTED.)
LOSCMFLG # IF DESIGNATE LOOP IS OFF, CHANGE LOSCM-
SETUP29D # FLG TO ON AND GO TO SET UP NEW DATA.
TCF NOR29NOW # IF DES. LOOP IS ON, LET IT USE OLD DATA.
SETUP29D STOVL LOSSM # LINE-OF-SIGHT VECTOR, STABLE MEMBER AXES
0
VXSC
.5SECB17
STORE LOSVDT/4 # 1/2 SECOND'S WORTH OF LOS VELOCITY.
CLEAR EXIT
LOSCMFLG # LET R29DLOOP USE NEW DATA.
2016-12-28 16:11:25 +00:00
CS STATE
MASK OLDESBIT
EXTEND
BZF NOR29NOW # BRANCH IF R29 DES. LOOP IS REQUESTED.
INHINT
ADS STATE # OTHERWISE REQUEST IT NOW.
2016-12-28 16:11:25 +00:00
CCS PIPCTR # SEE IF TASK SHOULD BE OFFSET ONE SECOND.
CS SUPER110 # -96D +100D = 4.
AD 1SEC # 0 +100D = 100D.
TC WAITLIST
EBANK= LOSCOUNT
2CADR BEGDES29 # START BEGDES29 TASK ASAP.
2016-12-28 16:11:25 +00:00
TCF NOR29NOW # RELINT AND CONTINUE SERVICER FUNCTIONS.
2016-12-28 16:11:25 +00:00
.5SECB17 2DEC 50 B-17
# Page 599
# R29 DESIGNATE JOB AND TASK MACHINERY. TASK RECURS EVERY .5 SEC UNTIL DESIGNATE IS CALLED OFF; IT MAY WAIT FOR A
# CENTISECOND OR TWO IF IT COMES UP WHILE SETUP29D IS SUPPLYING NEW DATA.
BANK 24
SETLOC P20S
BANK
2016-12-28 16:11:25 +00:00
COUNT* $$/R29
2016-12-28 16:11:25 +00:00
BEGDES29 CAF PRIO21
TC NOVAC
EBANK= LOSVDT/4
2CADR R29DODES # START R29DODES JOB TWICE A SECOND.
2016-12-28 16:11:25 +00:00
R29DLOOP CAF .5SEC
TC VARDELAY
2016-12-28 16:11:25 +00:00
CS RADMODES
MASK DESIGBIT
CCS A
TCF TASKOVER # QUIT IF DESIGNATION IS CALLED OFF.
2016-12-28 16:11:25 +00:00
CS FLAGWRD2
MASK LOSCMBIT
EXTEND
BZF +3 # BRANCH IF SETUP29D'S SUPPLYING NEW DATA.
ADS FLAGWRD2 # SET LOSCMFLG: SHOW THAT DES. LOOP IS ON.
TCF BEGDES29
2016-12-28 16:11:25 +00:00
CA ONE
TCF R29DLOOP +1 # WAIT A CENTISECOND FOR NEW DATA.
# Page 600
# R29DODES: RR DESIGNATION LOOP FOR R29
#
# THIS ROUTINE DOES MUCH THE SAME THING AS DODES, BUT A GREAT DEAL FASTER. IT TAKES THE NON-UNITIZED LOS VECTOR
# IN STABLE MEMBER COORDINATES (LOSSM) AND A DELTA-LOS IN SM AXES (LOSVDT/4) WHICH IS 1/2 SEC TIMES LOS VELOCITY,
# AND DEVELOPS THE SHAFT AND TRUNNION COMMANDS USING SINGLE PRECISION AS MUCH AS POSSIBLE, AND INTERPRETIVE NOT AT
# ALL. THE UNIT(LOSM + LOSVEL * 1 SEC) IS COMPUTED IN DP AND TRANSFORMED TO NAV BASE COORDINATES IN DOUBLE PRE-
# CISION (USING SP SINES AND COSINES OF CDU ANGLES), AND THE REST IS DONE IN SP.
#
# THE FUNCTIONAL DIFFERENCE IS THAT R29DODES ALWAYS CLEARS LOSCMFLG WHEN IT ENDS, AND IT STARTS UP THE R29READ
# TASK WHEN LOCK-ON IS ACHIEVED.
BANK 32
SETLOC F2DPS*32
BANK
2016-12-28 16:11:25 +00:00
COUNT* $$/R29
EBANK= LOSVDT/4
2016-12-28 16:11:25 +00:00
R29DODES CA ONE
TS TANG # INDICATE 1ST PASS THRU VECTOR LOOP.
CA FIVE
2016-12-28 16:11:25 +00:00
R29DVBEG CCS A # COUNT DOWN BY TWO'S IN VECTOR LOOP.
TS Q
CCS TANG
TCF R29DPAS1 # DO THIS ON 1ST PASS THRU LOOP.
2016-12-28 16:11:25 +00:00
EXTEND # (A "PASS" HERE MEANS 3 TIMES AROUND).
INDEX Q
DCA LOSVDT/4
INDEX Q
DAS LOSSM # ADVANCE LOS VECTOR 1/2 SECOND.
2016-12-28 16:11:25 +00:00
R29DPAS1 EXTEND
INDEX Q
DCA LOSSM
INDEX Q # MOVE CURRENT LOS (1ST PASS) OR LOS PRO-
DXCH MPAC +1 # JECTED 1/2 SEC AHEAD (2ND PASS).
CCS TANG
TCF R29DVEND # BUG OUT HERE IN 1ST PASS.
2016-12-28 16:11:25 +00:00
EXTEND
INDEX Q
DCA LOSVDT/4
INDEX Q
DAS MPAC +1 # PROJECT LOS 1 SECOND AHEAD (2ND PASS).
2016-12-28 16:11:25 +00:00
R29DVEND CCS Q
TCF R29DVBEG # BRANCH TO CONTINUE VECTOR LOOP.
2016-12-28 16:11:25 +00:00
# Page 601
# UNITIZE AND TRANSFORM TO NAV BASE AXES THE PRESENT LOS (1ST PASS) OR THE 1-SEC PROJECTED LOS (2ND PASS).
DXCH MPAC +1
DXCH MPAC
CA R29FXLOC # = ADRES INTB15 + -34D
TS FIXLOC
TC USPRCADR # WITH FIXLOC ARMED FOR LENGTH AND LENGTH
CADR UNIT # SQUARED, BORROW UNITIZING ROUTINE.
TC MPACVBUF # MOVE UNIT(LOS) TO AX*SR*T ARG AREA.
2016-12-28 16:11:25 +00:00
CCS TANG
TCF +2
TCF GOTANGLS # GET CDU ANGLES ONLY AFTER 1ST PASS.
INHINT # ENSURE CONSISTENT CDU READINGS.
EXTEND
DCA CDUT
DXCH SAVECDUT # TRUNNION AND SHAFT ANGLES.
CA CDUY
TS CDUSPOT
CA CDUZ
TS CDUSPOT +2
CA CDUX
TS CDUSPOT +4 # CDU ANGLES IN FUNNY ORDER FOR AX*SR*T.
TC BANKCALL
CADR QUICTRIG # GET SINES AND COSINES OF CDU ANGLES.
2016-12-28 16:11:25 +00:00
GOTANGLS CS THREE
TC BANKCALL
CADR AX*SR*T # TRANSFORM UNIT LOS TO NB AXES (ULOSNB).
CCS TANG
TCF +2
TCF R29DPAS2 # GO TO RR COMMAND COMP. AFTER 2ND PASS.
# Page 602
# COMPUTE COSINE OF THE ANGLE BETWEEN THE PRESENT LOS AND THE RR BORESIGHT VECTOR, AND SET THE SELFTRACK ENABLE IF
# THE COSINE IS APPROXIMATELY COS(.5 DEG) OR GREATER (I.E., SMALLER ANGLE).
INHINT
TS TANG # INDICATE 2ND PASS THRU VECTOR LOOP.
CA SAVECDUT
TC SPCOS
TS PUSHLOC # PUSHLOC = COS T.
CS SAVECDUT
TC SPSIN
TS MODE # MODE = -SIN T.
EXTEND
MP VBUF +2 # FORM - SIN T ULOSNBY.
DXCH MPAC
CA SAVECDUT +1
TC SPSIN
TS SAVECDUT # SAVECDUT NOW = SIN S.
EXTEND
MP PUSHLOC
EXTEND
MP VBUF # FORM SIN S COS T ULOSNBX.
DAS MPAC
CA SAVECDUT +1
TC SPCOS
TS SAVECDUT +1 # SAVECDUT +1 NOW = COS S.
EXTEND
MP PUSHLOC
EXTEND
MP VBUF +4 # FORM COS S COS T ULOSNBZ.
DAS MPAC # COS(ERROR) = ULOSNB . (SIN S COS T,
EXTEND # -SIN T, COS S COS T).
DCA MPAC
TESTCOS DAS MPAC # (ULOSNB IN VBUF WAS A HALF-UNIT VECTOR).
CCS A # TEST FOR + OVERFLOW, NONE, OR MINUS.
CA BIT14
NOOP
EXTEND
WOR CHAN12 # IF PLUS OVERFLOW, SET SELFTRACK ENABLE.
RELINT
TCF R29DVBEG -1 # MAKE 2ND PASS THRU VECTOR LOOP.
2016-12-28 16:11:25 +00:00
# Page 603
# COMPUTE SHAFT AND TRUNNION COMMANDS TO NULL HAVE THE ERROR IN HALF A SECOND.
R29DPAS2 CA SAVECDUT +1
EXTEND
MP VBUF # FORM COS S ULOSNB'X.
DXCH TANG
CS SAVECDUT
EXTEND
MP VBUF +4 # FORM - SIN S ULOSNB'Z.
DAS TANG # RAW SHAFT CMD = ULOSNB' . (COS S, 0,
CS MODE # - SIN S)
EXTEND
MP SAVECDUT
EXTEND
MP VBUF # FORM SIN T SIN S ULOSNB'X.
DXCH MPAC
CA PUSHLOC
EXTEND
MP VBUF +2 # FORM COS T ULOSNB'Y.
DAS MPAC
CS MODE
EXTEND
MP SAVECDUT +1
EXTEND
MP VBUF +4 # FORM SIN T COS S ULOSNB'Z.
DAS MPAC # RAW TRUNNION CMD = ULOSNB'.
CA MPAC # (SIN S SIN T, COS T, SIN S COS T).
EXTEND
MP RR29GAIN
XCH TANG # STORE REFINED T CMD, GET RAW S CMD.
EXTEND
MP RR29GAIN
TS TANG +1 # STORE REFINED S CMD.
2016-12-28 16:11:25 +00:00
# Page 604
# WHETHER OR NOT TRACKING WAS ENABLED THIS TIME, CHECK ON RR DATA-GOOD. IF PRESENT, STOP DESIGNATING AND START
# READING DATA FROM THE RENDEZVOUS RADAR.
DGOOD? CAF BIT4
EXTEND
RAND CHAN33 # GET RR DATA-GOOD BIT.
INHINT # (MAINLY FOR RROUT).
EXTEND
BZF R29LOKON # BRANCH IF DATA-GOOD IS PRESENT.
2016-12-28 16:11:25 +00:00
TC BANKCALL
CADR RROUT # DATA-GOOD IS ABSENT, SO SEND COMMANDS.
TCF END29DOD
2016-12-28 16:11:25 +00:00
R29LOKON CS DESIGBIT
MASK RADMODES
TS RADMODES # SHOW THAT DESIGNATION IS OVER.
CS BIT2
EXTEND
WAND CHAN12 # DISABLE RR ERROR COUNTERS.
CA READRBIT
ADS FLAGWRD3 # SHOW THAT READING HAS BEEN REQUESTED.
CCS PIPCTR # SEE IF TASK SHOULD BE OFFSET 1 SEC.
CS SUPER110 # -96D + 100D = 4.
AD 1SEC # 0 + 100D = 100D.
TC WAITLIST
EBANK= LOSCOUNT
2CADR R29READ # START READING TASK AND JOB.
2016-12-28 16:11:25 +00:00
END29DOD CS LOSCMBIT
MASK FLAGWRD2
TS FLAGWRD2 # ALWAYS CLEAR LOSCMFLG.
TCF ENDOFJOB
2016-12-28 16:11:25 +00:00
R29FXLOC ADRES INTB15+ -34D
RR29GAIN DEC -.53624
LOSVDT/4 EQUALS LOSVEL
LOSSM EQUALS RRTARGET
SAVECDUT EQUALS MLOSV
# Page 605
# RR READING IS SET UP BY R29DODES WHEN IT DETECTS RR LOCK-ON
BANK 24
SETLOC P20S
BANK
2016-12-28 16:11:25 +00:00
COUNT* $$/R29
2016-12-28 16:11:25 +00:00
EBANK= LOSCOUNT
2016-12-28 16:11:25 +00:00
R29READ CAF PRIO26 # CALLED BY WAITLIST
TC NOVAC
EBANK= LOSCOUNT
2CADR R29RDJOB # START JOB TO READ AND DOWNLINK FOR R29.
2016-12-28 16:11:25 +00:00
CA 2SECS
TC VARDELAY
2016-12-28 16:11:25 +00:00
CA FLAGWRD3 # 2 SECONDS LATER, SEE IF READING IS STILL
MASK READRBIT # ALLOWED (NO TRACKER FAIL ETC.)
CCS A
TCF R29READ # IT'S OK: CALL IT AGAIN.
TCF TASKOVER # IT AIN'T: WAIT FOR REDESIGNATE.
2016-12-28 16:11:25 +00:00
R29RDJOB CA FLAGWRD3 # CALLED VIA NOVAC.
MASK NR29FBIT
CCS A # TEST "NOR29FLG".
TCF ENDRRD29 # R29 IS NOW OVER, STOP AT ONCE.
2016-12-28 16:11:25 +00:00
CA RADMODES
MASK AUTOMBIT
CCS A # TEST RR-NOT-IN-AUTO-MODE BIT.
TCF ENDRRD29 # ASTRO TOOK RR OUT OF AUTO MODE.
2016-12-28 16:11:25 +00:00
TC BANKCALL
CADR RRRDOT # INITIATE READING OF RANGE RATE.
TC BANKCALL
CADR RADSTALL # GOT TO SLEEP UNTIL IT'S READY.
TCF ENDRRD29 # BAD READ; REDESIGNATE.
2016-12-28 16:11:25 +00:00
# Page 606
# R29 RADAR READING CONTINUED.
DXCH TIMEHOLD
DXCH MPAC # TIME OF RR READING, FOR DOWNLINK.
INHINT # BE SURE OF 5 CONSISTENT CDU ANGLES.
EXTEND
DCA CDUT
DXCH MPAC +2 # RRCDU ANGLES AT RR READ, FOR DOWNLINK.
EXTEND
DCA CDUY
DXCH MPAC +4 # MPAC'S 7 WORDS ARE BUFFERED FOR COPYCYCLE.
CA CDUX
TS MPAC +6 # IMUCDU ANGLES AT RR READ, FOR DOWNLINK.
2016-12-28 16:11:25 +00:00
R29RANGE TC BANKCALL
CADR RRRANGE # INITIATE READING OF RR RANGE.
TC BANKCALL
CADR RADSTALL # GO TO SLEEP UNTIL IT'S READY.
TCF R29RRR? # BAD READ OR SCALE CHANGE ... WHICH?
2016-12-28 16:11:25 +00:00
INHINT
DXCH DNRRANGE # COPYCYCLE TO LAY OUT NEW R29 DOWNLINK.
DXCH RM
DXCH MPAC
DXCH MKTIME
DXCH MPAC +2
DXCH TANGNB
DXCH MPAC +4
DXCH AIG
CA MPAC +6
TS AOG
CA ONE
TS TRKMKCNT # SHOW THAT DOWNLINK DATA IS CONSISTENT.
TCF ENDOFJOB
2016-12-28 16:11:25 +00:00
R29RRR? CS FLAGWRD5
MASK BIT10
CCS A # WAS IT A SCALE CHANGE (REAL OR PHONY)?
TCF ENDRRD29 # NO, A BAD READ; REDESIGNATE.
TC DOWNFLAG
ADRES RNGSCFLG
TCF R29RANGE # YES; CLEAR FLAG AND READ AGAIN.
2016-12-28 16:11:25 +00:00
ENDRRD29 CA ZERO # TROUBLE MADE US COME HERE TO LEAVE THE
TS TRKMKCNT # RR-READING MODE. DISCREDIT DOWNTEL.
TC DOWNFLAG
ADRES READRFLG
CS BIT14
EXTEND
# Page 607
WAND CHAN12 # REMOVE TRACK-ENABLE DISCRETE.
TCF ENDOFJOB
2016-12-28 16:11:25 +00:00
# Page 608
# W-MATRIX MONITOR
BANK 31
SETLOC VB67
BANK
COUNT* $$/EXTVB
2016-12-28 16:11:25 +00:00
EBANK= WWPOS
2016-12-28 16:11:25 +00:00
V67CALL TC INTPRET
CALL
V67WW
EXIT
EXTEND # SAVE THE PRESENT N99 VALUES FOR
DCA WWPOS # COMPARISON AFTER THE DISPLAY
DXCH WWBIAS +2
EXTEND
DCA WWVEL
DXCH WWBIAS +4
EXTEND
DCA WWBIAS
DXCH WWBIAS +6
V06N99DS CAF V06N99
TC BANKCALL
CADR GOXDSPF
TCF ENDEXT
TCF V6N99PRO
TCF V06N99DS
V6N99PRO ZL
CA FIVE
N99LOOP TS Q
INDEX Q
CS WWPOS
INDEX Q
AD WWPOS +6
ADS L
CCS Q # THE SUM OF ALL DIFFERENCES MUST BE ZERO.
TCF N99LOOP
LXCH A
EXTEND
BZF V06N9933
TC UPFLAG
ADRES V67FLAG
2016-12-28 16:11:25 +00:00
V06N9933 TC INTPRET
BON EXIT
V67FLAG
+2
TCF ENDEXT
DLOAD
# Page 609
WWPOS
SL4 SL1
STODL 0D
WWVEL
STODL 2D
WWBIAS
SL # SHIFT FROM NOUN SCALING (B-5) TO
10D # INTERNAL SCALING (B+5)
STORE 4D
BON LXA,1
SURFFLAG
V67SURF
0D
SXA,1 LXA,1
WRENDPOS
2D
SXA,1 GOTO
WRENDVEL
V67CLRF
V67SURF LXA,1 SXA,1
0D
WSURFPOS
LXA,1 SXA,1
2D
WSURFVEL
V67CLRF LXA,1 SXA,1
4D
WTRUN
SXA,1
WSHAFT
CLEAR EXIT
RENDWFLG
TCF ENDEXT
V67WW STQ BOV
S2
+1
CLEAR CALL
V67FLAG
INTSTALL
SSP DLOAD
S1
DEC 6
ZEROVECS
STORE WWPOS
STORE WWVEL
STORE WWBIAS
AXT,1
DEC 54
NXPOSVEL VLOAD* VSQ
W +54D,1
# Page 610
GOTO
ADDPOS
V06N99 VN 0699
SETLOC VB67A
BANK
COUNT* $$/EXTVB
2016-12-28 16:11:25 +00:00
ADDPOS DAD
WWPOS
STORE WWPOS
VLOAD* VSQ
W +108D,1
DAD
WWVEL
STORE WWVEL
VLOAD* VSQ
W +162D,1
DAD
WWBIAS
STORE WWBIAS
TIX,1 SQRT
NXPOSVEL
SR # SHIFT FROM INTERNAL SCALING (B+5) TO
10D # NOUN SCALING (B-5)
STODL WWBIAS
WWVEL
SQRT
STODL WWVEL
WWPOS
SQRT
STORE WWPOS
BOV GOTO
+2
V67XXX
DLOAD
DPPOSMAX
STORE WWPOS
STORE WWVEL
STORE WWBIAS
V67XXX DLOAD DSU
WWPOS
FT99999
BMN DLOAD
+3
FT99999
STORE WWPOS
LXA,1 SXA,1
S2
QPRET
# Page 611
EXIT
TC POSTJUMP
CADR INTWAKE
FT99999 2DEC 30479 B-19
# Page 612
BANK 25
SETLOC RADARUPT
BANK
COUNT* $$/RRUPT
2016-12-28 16:11:25 +00:00
EBANK= LOSCOUNT
R12LITES CA ONE
MASK IMODES33
CCS A
TCF ISWRETRN
2016-12-28 16:11:25 +00:00
TC HLIGHT
TC HLIGHT -3
TCF ISWRETRN
2016-12-28 16:11:25 +00:00
RADLITES CA BIT1
MASK IMODES33
CCS A
TC Q
2016-12-28 16:11:25 +00:00
CS BIT5
AD ITEMP1
CCS A
CS ONE
TCF VLIGHT
2016-12-28 16:11:25 +00:00
TCF RRTRKF
2016-12-28 16:11:25 +00:00
HLIGHT TS ITEMP5 # ZERO ITEMP5 FOR H INDEX
CA HLITE
TS L
2016-12-28 16:11:25 +00:00
CA FLGWRD11
MASK SCABBIT
CCS A
TCF ONLITES
CA LRALTBIT
BOTHLITS MASK RADMODES
CCS A
TCF ONLITES
2016-12-28 16:11:25 +00:00
CA FLGWRD11
INDEX ITEMP5
MASK HFLSHBIT
CCS A
TCF RRTRKF
# Page 613
LITIT EXTEND
QXCH ITEMP6
TC TRKFLON +1
2016-12-28 16:11:25 +00:00
EXTEND
QXCH ITEMP6
TCF RRTRKF
2016-12-28 16:11:25 +00:00
ONLITES INDEX ITEMP5
CS HFLSHBIT
MASK FLGWRD11
TS FLGWRD11
2016-12-28 16:11:25 +00:00
CA L
TCF LITIT
VLIGHT TS ITEMP5
CA VLITE
TS L
CA BIT8
TCF BOTHLITS
2016-12-28 16:11:25 +00:00
HLITE EQUALS BIT5
VLITE EQUALS BIT3
# *** END OF LEMP20S .127 ***