mirrors
/
Apollo-11
mirror of https://github.com/chrislgarry/Apollo-11.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Apollo-11/Comanche055/SERVICER207.agc

825 lines
19 KiB
Plaintext
Raw Blame History

# Copyright: Public domain.
# Filename: SERVICER207.agc
# Purpose: Part of the source code for Comanche, build 055. It
# is part of the source code for the Command Module's
# (CM) Apollo Guidance Computer (AGC), Apollo 11.
# Assembler: yaYUL
# Reference: pp. 819-836
# Contact: Ron Burkey <info@sandroid.org>
# Website: http://www.ibiblio.org/apollo.
# Mod history: 2009-05-12 RSB Adapted from Colossus249 file of the same
# name and Comanche 055 page images.
#
# The contents of the "Comanche055" files, in general, are transcribed
# from scanned documents.
#
# Assemble revision 055 of AGC program Comanche by NASA
# 2021113-051. April 1, 1969.
#
# This AGC program shall also be referred to as Colossus 2A
#
# Prepared by
# Massachusetts Institute of Technology
# 75 Cambridge Parkway
# Cambridge, Massachusetts
#
# under NASA contract NAS 9-4065.
#
# Refer directly to the online document mentioned above for further
# information. Please report any errors to info@sandroid.org.
# Page 819
# SERVICER207
# PROGRAM NAME - PREREAD, READACCS, SERVICER, AVERAGE G.
# MOD NO. 00 BY M.HAMILTON DEC.12, 1966
# FUNCTIONAL DESCRIPTION
# THE ROUTINES DESCRIBED BELOW ARE USED TO CALCULATE VALUES OF RN, VN, AND GDT/2 DURING ACCELERATED FLIGHT.
# THE SEVERAL ROUTINES COMPRISE A PACKAGE AND ARE NOT MEANT TO BE USED AS SEPARATE SUBROUTINES.
# GENERAL REFERENCES TO SERVICER OR AVERAGE G ARE UNDERSTOOD TO REFER TO THE ENTIRE SET OF ROUTINES INCLUDING
# READACCS, SERVICER, AVERAGE G, INTEREAD, SMOOTHER, AND ANY ADDITIONAL ROUTINES ATTACHED AT AVGEXIT (SEE BELOW).
# PROGRAMS INITIATING SERVICER ARE REQUIRED TO MAKE A WAITLIST CALL FOR PREREAD (OR, IF LIFTOFF, FOR BIBIBIAS)
# AT 2 SECONDS BEFORE THE FIRST AVERAGE G UPDATE IN ORDER TO INITIALIZE THE SEQUENCE, WHICH WILL RECUR EVERY
# 2 SECONDS FROM THAT TIME ON AS LONG AS AVEGFLAG REMAINS SET.
# THE USE OF ERASABLE AVGEXIT ALLOWS VARIOUS ROUTINES TO BE PERFORMED AS PART OF THE NORMAL CYCLE (SEE
# EXPLANATION OF AVGEXIT BELOW).
# DESCRIPTIONS OF INDIVIDUAL ROUTINES FOLLOW.
# PREREAD
# PREVIOUSLY EXTRAPOLATED VALUES COPIED FROM RN1, VN1, AND PIPTIME1 INTO RN, VN, AND PIPTIME.
# LASTBIAS JOB SCHEDULED.
# PIPS READ AND CLEARED VIA PIPASR SUBROUTINE.
# AVERAGE G FLAG SET ON.
# DRIFT FLAG SET OFF.
# V37 FLAG SET ON.
# INITIALIZATION OF 1) THRUST MONITOR (DVMON) - DVCNTR SET TO ONE.
# 2) TOTAL ACCUMULATED DELV VALUE (DVTOTAL) - SET TO ZERO.
# 3) AXIS VECTOR (AXIS) - SET TO (.5,0,0).
# NORMLIZE JOB SCHEDULED.
# READACCS TASH CALLED IN 2 SECONDS.
# NORMLIZE
#
# GDT/2 INITIALIZED VIA CALCGRAV SUBROUTINE.
# READACCS
# IF ONMON FLAG SET QUIKREAD ROUTINE IS PERFORMED BEFORE PIPASR ZEROS THE PIPA REGISTERS, AND THE 1/2 SEC
# ONMONITOR LOOP IS INITIATED TO PROVIDE DOWNLINK INFORMATION DURING ENTRY.
# PIPS READ AND CLEARED BY PIPASR SUBROUTINE.
# IF CM/DSTBY IS ON, ENTRY VARIABLES INITIALIZED AND SETJTAG TASK CALLED.
# Page 820
# SERVICER207
# IF AVERAGEG FLAG ON READACCS CALLED TO RECYCLE IN 2 SECONDS.
# IF AVERAGEG FLAG OFF AVERAGE G EXIT (AVGEXIT) SET TO 2CADR AVGEND FOR FINAL PASS.
# SERVICER JOB SCHEDULED.
# TEST CONNECTOR OUTBIT TURNED ON.
# ONMNITOR
# A SEQUENCE OF THREE PASSES THROUGH QUICREAD FOLLOWING A CALL TO READACCS WITH ONMONFLG SET AT 1/2
# SEC INTERVALS. INTERVALS ARE COUNTED OUT BY PIPCTR, INITIALISED AT 3 BY READACCS
# QUIKREAD
# READS CURRENT PIPS INTO X,Y,ZPIPBUF. READS OLD X,Y,ZPIPBUF INTO X,Y,ZOLDBUF. VALUES ARE SENT TO
# DOWNLIST DURING ENTRY.
# SERVICER
# DELV VALUES CHECKED TO DETECT RUNAWAY PIP -
# IF BAD PIP 1) ALARM SENT.
# 2) COMPENSATION, DVTOTAL ACCUMULATION, AND DVMON BYPASSED. CONTROL
# TRANSFERRED TO AVERAGE G.
# PIPS COMPENSATED VIA 1/PIPA SUBROUTINE.
# DVTOTAL INCREMENTED BY ABSOLUTE VALUE OF DELV.
# THRUST MONITOR (DVMON) PERFORMED UNLESS IDLE FLAG IS ON.
# CONTROL TRANSFERRED TO AVERAGE Q.
# DVMON
# THRESHOLD VALUD (PLACED IN DVTHRUSH BY USER) CHECKED AGAINST ABSOLUTE VALUE OF DELV TO CHECK
# THRUST LEVEL.
# IF THRUST 1) ULLAGE OFF ROUTINE PERFORMED.
# 2) STEERING FLAG TURNED ON AT FIRST DETECTION OF THRUST.
# 3) CONTROL TRANSFERRED TO AVERAGE G.
# IF NO THRUST 1) ON FIRST PASS THROUGH MONITOR, CONTROL TRANSFERRED TO AVERAGE G.
# 2) ON SUBSEQUENT PASSES, CONTROL TRANSFERRED TO ENGINE FAIL ROUTINE IF THRUST
# HAS FAILED FOR 3 CONSECUTIVE PASSES.
# ENGINE FAIL
# ENGFAIL1 TASK CALLED IN 2.5 SECONDS. THIS WILL RETURN CONTROL TO TIG-5 SO THAT THE IGNITION
# SEQUENCE MAY BE REPEATED.
# ENGINOF3 PERFORMED.
# DAP SET UP FOR RCS.
# AVERAGE G
# Page 821
# RN1, VN1, GDT1/2 CALCULATED VIA CALCRVG ROUTINE BY UPDATING RN, VN WITH DELV AND AN AVERAGED VALUE
# OF GDT/2.
# RN1, VN1, GDT1/2, PIPTIME1 COPIED INTO RN, VN, GDT/2, PIPTIME FOR RESTART PROTECTION.
# CONTROL TRANSFERRED TO ADDRESS SPECIFIED BY USER (OR BY READACCS FOR LAST PASS) IN AVGEXIT.
# LAST PASS (AVGEND) 1) FREE FALL GYRO COMPENSATION SET UP.
# 2) DRIFT FLAG TURNED ON.
# 3) STATE VECTOR TRANSFERRED VIA AVETOMID ROUTINE.
# 4) ONMONITOR FLAG RESET.
# 5) V37 FLAG RESET.
# 6) TEST CONNECTOR OUTBIT RESET.
# 7) CONTROL TRANSFERRED TO CANV37 TO CONTINUE MM CHANGE ROUTINE (R00).
# CALLING SEQUENCE
# PREREAD ENTERED DIRECTLY FROM TIG-30 VIA POSTJUMP.
# READACCS CALLED AS WAITLIST TASK.
# SUBROUTINES CALLED
# UTILITY ROUTINES - PHASCHNG FLAGUP FLAGDOWN NOVAC FINDVAC WAITLIST ALARM NEWPHASE 2PHSCHNG
# OTHER - PIPASR 1/PIPA CALCGRAV CALCRVG AVETOMID
# NORMAL EXIT MODES
# ENDOFJOB TASKOVER CANV37
# AVGEXIT - THIS IS A DOUBLE PRECISION ERASABLE LOCATION BY WHICH CONTROL IS TRANSFERRED AT THE END
# OF EACH CYCLE OF AVERAGE G.
# THE 2CADR OF A ROUTINE TO BE PERFORMED AT THAT TIME (E.G., STEERING EQUATIONS TO BE PERFORMED
# AT 2 SECOND INTERVALS) MAY BE SET BY THE USER INTO AVGEXIT.
# ALL SUCH ROUTINES SHOULD RETURN TO SERVEXIT, WHICH IS THE NORMAL EXIT FROM AVERAGE G.
# SERVEXIT - DOES A PHASE CHANGE FOR RESTART PROTECTION AND GOES TO ENDOFJOB.
# THE 2CADR OF SERVEXIT IS SET INTO AVGEXIT BY THE USER IF NO OTHER ROUTINE (SEE ABOVE).
#
# AVGEND - LAST PASS OF AVERAGE G EXITS HERE, BYPASSING SPECIAL ROUTINE (SEE ABOVE UNDER READACCS).
# FINAL EXIT IS TO CANV37. F AVERAGE G).
# OUTPUT
# DVTOTAL(2) PIPTIME(2) XPIPBUF(2) YPIPBUF(2) ZPIPBUF(2)
# RN(6) REFERENCE COORD. SCALED AT 2(+29) M/CS
# VN(6) REFERENCE COORD. SCALED AT 2(+7) M/CS
# GDT/2(6) REFERENCE COORD. SCALED AT 2(+7) M/CS
# DELV(6) STABLE MEMB. COORD.SCALED AT 2(+14)*5.85*10(-4)M/CS (KPIP1 USED TO GET DV/2 AT 2(+7))
# Page 822
# DELVREF(6) REFERENCE COORD. SCALED AT 2(+7) M/CS
# INITIALIZATION
# ONMONITOR FLAG SET BY ENTRY TO SHOW PIPBUF VALUES REQUIRED.
# IDLE FLAG ON IF DVMON TO BE BYPASSED.
# DVTHRUSH SET TO APPROPRIATE VALUE FOR DVMON.
# AVGEXIT SET TO 2CADR OF ROUTINE, IF ANY, TO BE PERFORMED AFTER EACH CYCLE OF AVERAGE G. IF NO ROUTINE
# TO BE DONE, AVGEXIT SET TO SERVEXIT.
# VALUES NEEDED
# REFSMMAT
# UNITW - FULL UNIT VECTOR, IN REFERENCE COORD., OF EARTH S ROTATIONAL VECTOR
# RN1, VN1, PIPTIME1 - IN REFERENCE COORD., CONSISTENT WITH TIME OF EXECUTION OF PREREAD
# DEBRIS
# CENTRALS A, L, Q
# OTHER INTERNAL - DVCNTR(1) PIPAGE(1) PIPCTR(1) AVGEXIT(2)
# EXTERNAL - ITEMP1(1) ITEMP2(1) RUPTREG1(1) TEMX(1) TEMY(1) TEMZ(1)
# USEFUL DEBRIS
# RN1(6) VN1(6) GDT1/2 PIPTIME1(2)
# THESE LOCATIONS USED AS BUFFER STORAGE FOR NEWLY CALCULATED VALUES OF RN, VN, GDT/2,
# AND PIPTIME DURING PERFORMANCE OF SERVICER ROUTINES.
# UNITR - HALF UNIT VECTOR OF RN, REFERENCE COORD.
# RMAG SCALED AT 2(+58) IN 36D.
# RMAGSQ SCALED AT 2(+58) IN 34D.
# (RE/RMAG)SQ IN 32D.
BANK 27
SETLOC SERVICES
BANK
EBANK= DVCNTR
# ********************* PREREAD ***************************************
#
COUNT 37/SERV
PREREAD CAF PRIO21 # CALLER MUST PROTECT PREREAD
TC NOVAC
EBANK= NBDX
2CADR LASTBIAS # DO LAST GYRO COMPENSATION IN FREE FALL
# CALL-TO AND LASTBIAS ITSELF ARE NOT
# PROTECTED. REREADAC SETS 1/PIPADT
# TO 2.0 SECS IN CASE LASTBIAS LOST.
# (REDUNDANT IF LASTBIAS IS AOK)
# Page 823
REDO5.31 TC PREREAD1
CAF PRIO32
TC FINDVAC # SET UP NORMLIZE JOB REQUIRED PRIOR TO
EBANK= DVCNTR # FIRST AVERAGE G PASS
2CADR NORMLIZE
CAF 2SECS
TC WAITLIST
EBANK= AOG
2CADR READACCS
CS TWO
TC NEWPHASE
OCT 5
TCF TASKOVER
PREREAD1 EXTEND
QXCH RUPTREG1
TC PIPASR # CLEAR + READ PIPS LAST TIME IN FREE FALL
CAF ONE # SET UP PIPAGE FOR REREADAC IN CASE A
TS PIPAGE # RESTART OCCURS BEFORE READACCS
CS FLAGWRD1 # SET AVEG FLAG
MASK BIT1
ADS FLAGWRD1
CA POSMAX
MASK FLAGWRD2
TS FLAGWRD2 # KNOCK DOWN DRIFT FLAG
CS FLAGWRD7 # SET V37 FLAG
MASK BIT6
ADS FLAGWRD7
CAF ZERO
TS DVTOTAL # CLEAR DVTOTAL
TS DVTOTAL +1
TC RUPTREG1
# Page 824
# ********************* READACCS ***************************************
EBANK= AOG
READACCS TC PIPASR
PIPSDONE CAF FIVE
TS L
COM
DXCH -PHASE5
REDO5.5 CAF ONE # SHOW PIPS HAVE BEEN READ
TS PIPAGE
CA TWO # SET PIPCTR FOR ONMINTOR
TS PIPCTR # AFTER ABOVE PHASCHNG
CS CM/FLAGS
MASK BIT2 # CM/DSTBY
CCS A
TC CHEKAVEG
CS PIPTIME1 +1
TS TBASE6 # FOR RESTARTS
EXTEND # CONTINUE FOR ENTRY DAP
DCA AOG
DXCH AOG/PIP
CA AMG
XCH AMG/PIP
EXTEND
DCA ROLL/180
DXCH ROLL/PIP
CA BETA/180
XCH BETA/PIP
CA CM/FLAGS
MASK BIT12 # CM/DAPARM 93D BIT12
EXTEND # DURING ENTRY, WHEN RCS DAP IS INACTIVE,
BZF NOSAVPIP # SAVE PIPAS EACH 0.5 SEC FOR TM.
CA 0.5SEC
TC WAITLIST
EBANK= XPIPBUF
2CADR QUIKREAD
# NO NEED TO RESTART PROTECT THIS.
CA DELVX # SAVE PIPAS AS READ (BUT NOT COMPENSATED)
XCH XPIPBUF
TS XOLDBUF
CA DELVY
XCH YPIPBUF
TS YOLDBUF
# Page 825
CA DELVZ
XCH ZPIPBUF
TS ZOLDBUF
NOSAVPIP CA FIVE
TS CM/GYMDT
CA JTAGTIME # ACTIVATE CM/RCS AFTER PIPUP TO GO
# IN JTAGTIME +5 CS.
TC WAITLIST
EBANK= AOG
2CADR SETJTAG
CS THREE # 1.3SPOT FOR SETJTAG
TC NEWPHASE
OCT 1
CAF OCT37
TS L
COM
DXCH -PHASE5
CHEKAVEG CS FLAGWRD1
MASK BIT1
CCS A # IF AVEG FLAG DOWN SET FINAL EXIT AVEG
TC AVEGOUT
CAF 2SECS
TC WAITLIST
EBANK= AOG
2CADR READACCS
MAKESERV CAF PRIO20 # ESTABLISH SERVICER ROUTINE
TC FINDVAC
EBANK= DVCNTR
2CADR SERVICER
CS FOUR # RESTART SERVICER AND READACCS
TC NEWPHASE
OCT 5
CAF BIT9
EXTEND
WOR DSALMOUT # TURN TEST CONNECTOR OUTBIT ON
TCF TASKOVER # END PREVIOUS READACCS WAITLIST TASK
# Page 826
AVEGOUT EXTEND
DCA AVOUTCAD
DXCH AVGEXIT
TCF MAKESERV
EBANK= DVCNTR
AVOUTCAD 2CADR AVGEND
# Page 827
# ROUTINE NAME: ONMNITOR
# MOD 04 BY BAIRNSFATHER 30 APR 1968 REDO ONMNITOR TO SAVE PIPS EACH 0.5 SEC FOR TM,ENTRY.
# MOD 03 BY FISHER DECEMBER 1967
# MOD 02 BY RYE SEPT 1967
# MOD 01 BY KOSMALA 23 MAR 1967
# MOD 00 BY KOSMALA 27 FEB 1967
# FUNCTIONAL DESCRIPTION
# THE PURPOSE OF ONMONITOR IS TO PROVIDE 1/2 SEC.READING OF PIPAS FOR DOWNLIST DURING ENTRY.
# X,Y,ZPIPBUF CONTAIN PRESET VALUES X,Y,ZOLDBUF CONTAIN VALUES FROM PREVIOUS READING.
# CALLING SEQUENCE
# CALL AS WAITLIST TASK. TERMINATES ITSELF IN TASKOVER
# INITIALISATION
# PIPCTR = 2 (FOR DT = 0.5 SEC)
# X,Y,ZPIPBUF SET TO PREVIOUS PIPAX,Y,Z
# OUTPUT
# X,Y,ZPIPBUF, X,Y,ZOLDBUF
# DEBRIS
# X,Y,ZPIPBUF CONTAIN LAST PIPAX,Y,Z VALUES
# X,Y,ZOLDBUF CONTAIN LAST-BUT-ONE PIPAX,Y,Z VALUES
# RUPTREG1
# PIPCTR
ONMNITOR TS PIPCTR
TC FIXDELAY # WAIT
0.5SEC DEC 50
QUIKREAD CAF TWO
TS RUPTREG1
INDEX A
CA PIPAX # SAVE ACTUAL PIPAS FOR TM.
INDEX RUPTREG1
XCH XPIPBUF # UPDATE X,Y,ZPIPBUF
INDEX RUPTREG1
TS XOLDBUF # AND X,Y,ZOLDBUF
CHKCTR CCS RUPTREG1
TCF QUIKREAD +1 # LOOP AGAIN
CCS PIPCTR
TCF ONMNITOR
TC TASKOVER
# Page 828
# ********************* SERVICER ***************************************
#
EBANK= DVCNTR
SERVICER CAF TWO
INHINT
PIPCHECK TS RUPTREG1
DOUBLE
INDEX A
CCS DELVX
TC +2
TC PIPLOOP
AD -MAXDELV # DO PIPA-SATURATION TEST BEFORE
EXTEND
BZMF PIPLOOP # COMPENSATION.
TC ALARM
OCT 00205 # SATURATED-PIPA ALARM ***CHANGE LATER
TC AVERAGEG
PIPLOOP CCS RUPTREG1
TCF PIPCHECK
TC PHASCHNG # RESTART REREADAC + SERVICER
OCT 16035
OCT 20000
EBANK= DVCNTR
2CADR DVTOTUP
TC BANKCALL # PIPA COMPENSATION CALL
CADR 1/PIPA
DVTOTUP TC INTPRET
VLOAD ABVAL # GET ABS VALUE OF DELV
DELV
DMP EXIT
KPIP1 # SCALE AT 2(+7)
EXTEND
DCA MPAC
DAS DVTOTAL # ACCUMULATE DVTOTAL
AVERAGEG TC PHASCHNG
OCT 10035
TC INTPRET
CALL
# Page 829
CALCRVG
EXIT
TC PHASCHNG
OCT 10035
CAF OCT31 # COPY RN1,VN1,GOT102,GOBL1/2,PIPTIME1
TC GENTRAN # INTO RN ,VN ,GDT/12 ,GOBL/2 ,PIPTIME
ADRES RN1
ADRES RN
RELINT # GENTRAN DOES AN INHINT
TC PHASCHNG
OCT 10035
EXTEND
DCA AVGEXIT
DXCH Z # AVERAGEG EXIT
AVGEND CA PIPTIME +1 # FINAL AVERAGE G EXIT
TS OLDBT1 # SET UP FREE FALL GYRO COMPENSATION
TC UPFLAG # SET DRIFTFLG
ADRES DRIFTFLG # BIT 15 FLAG 2
TC 2PHSCHNG
OCT 5 # GROUP 5 OFF
OCT 05022 # GROUP 2 ON FOR AVETOMID
OCT 20000
TC INTPRET
CALL
AVETOMID # CONVERT STATE VECTOR TO REFERENCE SCALE.
EXIT
CAF ZERO # ZERO MARK COUNTERS.
TS VHFCNT
TS TRKMKCNT
TC BANKCALL
CADR PIPFREE
CS BIT9
TS MRKBUF2 # INVALIDATE MARK BUFFER
EXTEND
WAND DSALMOUT
TC DOWNFLAG
ADRES CM/DSTBY
TC DOWNFLAG
ADRES V37FLAG
# Page 830
CAF BIT7 # RESTORE GROUP 1 + 2 IF P20 IS RUNNING.
MASK FLAGWRD0
EXTEND
BZF +4
TC 2PHSCHNG
OCT 111 # 1.11SPOT
OCT 132 # 2.13SPOT
TC POSTJUMP
CADR CANV37
SERVEXIT TC PHASCHNG
OCT 00035 # A, 5.3 = REREADAC (ONLY)
TCF ENDOFJOB
DVTHRUSH EQUALS ELEVEN # 15 PERCENT OF 2SEC PIPA ACCUMULATION,
# FOR 503-FULL CSM/LEM....DELV SC.AT
# 5.85 CM/SEC.
-MAXDELV DEC -6398 # 3200 PPS FOR 2 SEC CCS TAKES 1
JTAGTIME DEC 120 # = 1 SEC + T CDU, T CDU = .1 SEC
2.5SEC DEC 250
MDOTFAIL DEC 144.0 B-16 # 5 SEC MASS LOSS AT 28.8 KG/SEC
# SHOULD BE 2-4 SECS FOR NO START
# 6-8 SECS FOR FAILURE
# Page 831
# NORMLIZE PERFORMS THE INITIALIZATION REQUIRED PRIOR TO THE FIRST ENTRY TO AVERAGEG, AND SCALES RN SO THAT IT
# HAS 1 LEADING BINARY ZERO. IN MOST MISSIONS, RN WILL BE SCALED AT 2(+29), BUT IN THE 206 MISSION, RN WILL BE
# SCALED AT 2(+24)M.
NORMLIZE CAF THIRTEEN # SET UP TO COPY 14 REGS- RN1,VN1,PIPTIME1
TC GENTRAN # INTO RN,VN, PIPTIME
ADRES RN1 # FROM HERE
ADRES RN # TO HERE
RELINT
TC INTPRET
VLOAD CALL # LOAD RN FOR CALCGRAV
RN
CALCGRAV # INITIALISE UNITR RMAG GDT1
STOVL GDT/2
GOBL1/2
STORE GOBL/2
EXIT
TCF ENDOFJOB
# Page 832
# ***** PIPA READER *****
# MOD NO. 00 BY D. LICKLY DEC.9 1966
# FUNCTIONAL DESCRIPTION
# SUBROUTINE TO READ PIPA COUNTERS, TRYING TO BE VERY CAREFUL SO THAT IT WILL BE RESTARTABLE.
# PIPA READINGS ARE STORED IN THE VECTOR DELV. THE HIGH ORDER PART OF EACH COMPONENT CONTAINS THE PIPA READING,
# RESTARTS BEGIN AT REREADAC.
# AT THE END OF THE PIPA READER THE CDUS ARE READ AND STORED AS A
# VECTOR IN CDUTEMP. THE HIGH ORDER PART OF EACH COMPONENT CONTAINS
# THE CDU READING IN 2S COMP IN THE ORDER CDUX,Y,Z. THE THRUST
# VECTOR ESTIMATOR IN FINDCDUD REQUIRES THE CDUS BE READ AT PIPTIME.
# CALLING SEQUENCE AND EXIT
# CALL VIA TC, ISWCALL, ETC.
# EXIT IS VIA Q.
# INPUT
# INPUT IS THROUGH THE COUNTERS PIPAX, PIPAY, PIPAZ, AND TIME2.
# OUTPUT
# HIGH ORDER COMPONENTS OF THE VECTOR DELV CONTAIN THE PIPA READINGS.
# PIPTIME CONTAINS TIME OF PIPA READING.
# DEBRIS (ERASABLE LOCATIONS DESTROYED BY THE PROGRAM)
# LOW ORDER DELV'S ARE ZEROED FOR TM INDICATION.
# TEMX TEMY TEMZ PIPAGE
PIPASR EXTEND
DCA TIME2
DXCH PIPTIME1 # CURRENT TIME POSITIVE VALUE
CS ZERO # INITIALIZE THESE AT NEG ZERO.
TS TEMX
TS TEMY
TS TEMZ
# Page 833
CA ZERO
TS DELVZ # OTHER DELVS OK INCLUDING LOW ORDER
TS DELVY
TS DELVX +1 # LOW ORDER DELV'S ARE ZEROED FOR TM: THUS
TS DELVY +1 # IF DNLNK'D LOW ORDER DELVS ARE NZ, THEY
TS DELVZ +1 # CONTAIN PROPER COMPENSATION. IF=0, THEN
# THE TM VALUES ARE BEFORE COMPENSATION.
TS PIPAGE # SHOW PIPA READING IN PROGRESS
REPIP1 EXTEND
DCS PIPAX # X AND Y PIPS READ
DXCH TEMX
DXCH PIPAX # PIPAS SET TO NEG ZERO AS READ.
TS DELVX
LXCH DELVY
REPIP3 CS PIPAZ # REPEAT PROCESS FOR Z PIP
XCH TEMZ
XCH PIPAZ
DODELVZ TS DELVZ
TC Q
EBANK= AOG
REREADAC CCS PHASE5 # LAST PASS CHECK
TCF +2
TCF TASKOVER
CAF PRIO31 # RESTART MAY HAVE WIPED OUT LASTBIAS, AN
TS 1/PIPADT # UNPROTECTED NOVAC FROM PREREAD,
# WHICH SET(S) UP 1/PIPADT (THUSLY)
# FOR NON-COASTING COMPENSATION....BE
# SURE 1/PIPADT IS AOK. (PRIO31 IS
# 2.0SEC SC.AT B+8CS)
CCS PIPAGE
TCF READACCS # PIP READING NOT STARTED. GO TO BEGINNING
CAF DONEADR # SET UP RETURN FROM PIPASR
TS Q
CCS DELVZ
TC Q # Z DONE, GO DO CDUS
TCF +3 # Z NOT DONE, CHECK Y.
TC Q
TC Q
# Page 834
ZL
CCS DELVY
TCF +3
TCF CHKTEMX # Y NOT DONE, CHECK X.
TCF +1
LXCH PIPAZ # Y DONE, ZERO Z PIP.
CCS TEMZ
CS TEMZ # TEMZ NOT = -0, CONTAINS -PIPAZ VALUE.
TCF DODELVZ
TCF -2
LXCH DELVZ # TEMZ = -0, L HAS ZPIP VALUE.
TC Q
CHKTEMX CCS TEMX # HAS THIS CHANGED
CS TEMX # YES
TCF +3 # YES
TCF -2 # YES
TCF REPIP1 # NO
TS DELVX
CS TEMY
TS DELVY
CS ZERO # ZERO X AND Y PIPS
DXCH PIPAX # L STILL ZERO FROM ABOVE
TCF REPIP3
DONEADR GENADR PIPSDONE
# Page 835
# *********************************************************************************************
# ROUTINE CALCRVG INTEGRATES THE EQUATIONS OF MOTION BY AVERAGING THE THRUST AND GRAVITATIONAL
# ACCELERATIONS OVER A TIME INTERVAL OF 2 SECONDS.
#
# FOR THE EARTH-CENTERED GRAVITATIONAL FIELD, THE PERTURBATION DUE TO OBLATENESS IS COMPUTED TO THE FIRST
# HARMONIC COEFFICIENT J.
# ROUTINE CALCRVG REQUIRES...
# 1) THRUST ACCELERATION INCREMENTS IN DELV SCALED SAME AS PIPAX,Y,Z IN STABLE MEMBER COORDS.
# 2) VN SCALED 2(+7)M/CS IN REFERENCE COORDS.
# 3) RN SCALED AT 2(+29) METERS IN REFERENCE COORDS.
# 4) UNITW THE EARTH S UNIT ROTATIONAL VECTOR (SCALED AS A FULL UNIT VECTOR) IN REFERENCE COORDS.
# IT LEAVES RN1 UPDATED (SCALED AT 2(+29)M, VN1 (SCALED AT 2(+7)M/CS), AND GDT1/2 (SCALED AT 2(+7)M/CS). ALSO HALF
# UNIT VECTOR UNITR, RMAG IN 36D SCALED AT 2(+29)M, R MAG SQ. IN 34D SCALED AT 2(+58) M SQ.
CALCGRAV UNIT PUSH # ENTER WITH RN IN MPAC
STORE UNITR
LXC,1 SLOAD
RTX2
X1
BMN VLOAD
ITISMOON
DOT PUSH
UNITW
DSQ BDSU
DP1/20
PDDL DDV
RESQ
34D # (RN)SQ
STORE 32D # TEMP FOR (RE/RN)SQ
DMP DMP
20J
VXSC PDDL
UNITR
DMP DMP
2J
32D
VXSC VAD
UNITW
STADR
STORE GOBL1/2
VAD PUSH
UNITR
ITISMOON DLOAD NORM
34D
X2
BDDV* SLR*
# Page 836
-MUDT(E),1
0 -21D,2
VXSC STADR
STORE GDT1/2 # SCALED AT 2(+7) M/CS
RVQ
CALCRVG VLOAD VXSC
DELV
KPIP1
VXM VSL1
REFSMMAT
STORE DELVREF # DELV IN REF COORDS AT 2(+7)
VSR1 PUSH
VAD PUSH # (DV-OLDGDT)/2 TO PD SCALED AT 2(+7)M/CS
GDT/2
VAD VXSC
VN
2SEC(22)
VAD STQ
RN
31D
STCALL RN1 # TEMP STORAGE OF RN SCALED 2(+29)M
CALCGRAV
VAD VAD
VAD
VN
STCALL VN1 # TEMP STORAGE OF VN SCALED 2(+7)M/CS.
31D
KPIP 2DEC .1024 # SCALES DELV TO 2(+4)
KPIP1 2DEC 0.074880 # 207 DELV SCALING. 1 PULSE = 5.85 CM/SEC.
-MUDT(E) 2DEC* -7.9720645 E+12 B-44*
-MUDT(M) 2DEC* -9.805556 E+10 B-44*
2SEC(22) 2DEC 200 B-22
DP1/20 2DEC 0.05
RESQ 2DEC* 40.6809913 E12 B-59*
20J 2DEC* 3.24692010 E-2 B1*
2J 2DEC* 3.24692010 E-3 B1*
Reference in New Issue View Git Blame Copy Permalink